Quantification of tripdiolide in human whole blood by liquid chromatography coupled with atmospheric pressure chemical ionization tandem mass spectrometry

A liquid chromatographic-tandem mass spectrometric (LC-MS/MS) assay was developed and validated to determine tripdiolide in human whole blood using dexamethasone acetate as an internal standard (I.S.). Liquid-liquid extraction with ethyl acetate was used to isolate them from the biological matrix. Detection was performed on a mass spectrometer coupled with a negative atmospheric pressure chemical ionization (APCI) in the multiple-reaction monitoring (MRM) mode. The calibration curve was linear (r² = 0.9973) in the concentration range of 0.5-100.0 ng/mL in human whole blood with a lower limit of quantification of 0.5 ng/mL. Intra-day and inter-day relative standard deviations (R.S.D.s) were less than 7.0 and 10.1%, respectively. Extraction recoveries of tripdiolide ranged from 80.5 to 90.1%. This assay can be used to determine trace tripdiolide in human whole blood.     

Development of a miniature simultaneous MPT spectrometer

An unique miniature simultaneous microwave plasma torch (MPT) atomic emission spectrometer employing linear UV intensified charge-coupled device (ICCD) array detector has been developed and studied preliminarily. The detection limits and precisions of the spectrometer for Ag, Al, Ba, Ca, Cr, Cu, Fe, Mg, Mn, Sr and V by using different CCD exposure times have been determined. An analysis of a practical sample has been carried out. The preliminary results demonstrate that such simultaneous spectrometer has advantages of saving sample and time, especially suitable for use as detector for chromatography and in combination with flow injection systems. Taking analytical figures of merit and portability into accounts, the miniature simultaneous MPT system will have extended application areas and greater competition potential as compared with commercialized scanning MPT spectrometers.     

Determination of gamma-globulin at nanogram levels by its enhancement effect on the resonance light scattering of functionalized HgS nanoparticles

A novel assay of γ-globulin (γ-IgG) with a sensitivity at the nanogram level is proposed based on the measurement of enhanced resonance light-scattering (RLS) signals resulting from the interaction of functionalized nano-HgS with γ-globulin. At pH 5.03, the RLS signals of functionalized nano-HgS were greatly enhanced by γ-globulin in the region of 200-700 nm characterized by the peak around 362 nm. Linear relationship can be established between the enhanced RLS intensity and γ-globulin concentration in the range of 10-140 ng ml⁻¹. The limit of detection is 2.71 ng ml⁻¹. Based on this, a new direct quantitative determination method for γ-globulin in blood serum samples without separation of human serum albumin (HSA) is established. The contents of γ-IgG in blood serum samples were determined with recovery of 95.7-102.5% and R.S.D. of 1.6-2.4%. This method is proved to be very sensitive, rapid, simple and tolerance of most interfering substances.     

Electrocatalysis of the SiC Particle‐Modified Glassy Carbon Electrode for the Oxidation of Adrenaline

The electrocatalytic properties of the SiC particle‐modified glassy carbon electrode (MGC) for adrenaline oxidation were studied by cyclic voltammetry (CV), double‐potential step chronocoulometry (DPSCC), and electrochemical impedance spectroscopy (EIS) techniques in McIlvaine buffer solution. It was shown that the electrode modified with SiC particles markedly displayed an electrocatalytic effect on the process of the electrochemical reaction of adrenaline, i.e., the activity and the reversibility of the MGC electrode has been significantly improved. This was attributed to the adsorption effect of the electroactive adrenaline molecules on the MGC electrode surface.     

Novel Synthesis of Dihydroquinoxalinylpyridazine Derivatives

Methylquinoxaline derivative 1 undergoes bromination to give bromomethyl quinoxaline 2 , which could be transferred to cyanomethyl quinoxaline 3 . The latter compound 3 readily coupled with arene diazonium salts to give hydrazone derivatives 5a‐c . Compounds 5a,b reacted with active methylene reagents to give the target ring system, quinoxalinylpyridazine derivatives 8a‐c . Compound 1 reacted with DMFDMA to give the enamine derivative 9 , which coupled with arene diazonium salts to give the aldehydic hydrazone derivatives 10a‐c . Compound 10 reacted with active methylene compounds to give quinoxalinylpyridazine derivatives. UV characterization of some of the prepared compounds was reported.     

Determination of Naphthalenesulfonate Isomers in Industrial Effluents and River Water by Solid‐Phase Extraction and Capillary Zone Electrophoresis

This work presents a method to separate polar naphthalenesulfonate (NS) isomers by capillary zone electrophoresis (CZE) with ultraviolet detection in industrial effluents and river water samples. The method involves extraction of samples by a polystyrene‐divinylbenzene copolymer (PS‐DVB) solid‐phase extraction (SPE) cartridge. The most effective CZE separation conditions were obtained in 20 mM borate buffer with 30% acetonitrile at pH 9.0 and 30 °C. The method proposed herein provides a high precision and sensitivity for NS isomers, to quantitation at ≤ 1.0 μg/L in 200 mL of the water samples. Recovery of the NS isomers in spiked water samples ranged from 73% to 87% while RSD ranging from 5.6 to 9.7%. The analysis of industrial effluents and river water samples was performed and naphthalene‐2‐sulfonate was found as a major pollutant. The difficulties in quantitating and identifying analytes in complex environmental samples can be resolved by using an internal standard response factor to calculate concentrations and relative migration times for peak confirmation.     

2020 Roadmap on two-dimensional nanomaterials for environmental catalysis

This roadmap demonstrates a series of two-dimensional nanomaterials, such as graphene, black phosphorus, oxides, layered double hydroxides, chalcogenides, bismuth-based layered compounds, MXenes, metal organic frameworks, covalent organic frameworks, and others, for environmental catalysis.     

Fibrous crystalline hydrogels formed from polymers possessing a linear poly(ethyleneimine) backbone

Novel thermoreversible physical hydrogels formed from polymers with linear and star architectures possessing a linear poly(ethyleneimine) (PEI) backbone have been investigated. The hydrogelation occurred simply upon natural cooling of hot aqueous solutions of PEIs to room temperature. The X-ray diffraction and differential scanning calorimetry measurements for the resultant hydrogels unambiguously indicated that the hydrogelation originated from the formation of dihydrate crystalline structures of PEI. These crystalline hydrogels are structurally unique and hierarchical. Microscopic images revealed that the morphologies of the crystalline hydrogels depend on their molecular architectures. The linear PEI resulted in branched fibrous bundles organized by unit crystalline nanofibers with a width of ca. 5-7 nm. The six-armed star with benzene ring core produced fanlike fibrous bundles while the four-armed star with porphyrin core assembled into asterlike aggregates. The critical concentration of gelation (C(G)) was low (about 0.2 approximately 0.3%) and the thermoreversible gel-sol transition temperatures (T(G)) were controllable from approximately 43 to approximately 79 degrees C. The hydrogels formed in the presence of the various aqueous additives including organic solvents, hydrophilic polymers, physical cross-linker, chemical cross-linker, and base enabling modification and functionalization during synthesis. The mechanical properties of the hydrogels could be improved by chemical cross-linking of preformed hydrogels by glutaraldehyde. Physically and physical/chemical cross-linked hydrogels served as excellent template roles in biomimetic silicification, which produced silica-PEI hybrid powder or monolith constructed by nanofibers.     

Theoretical study on the molecule C30H20: five carbon–carbon single bonds linking a dodecahedrane cage and a pentaprismane cage

Using geometry optimization and DFT method at the B3LYP/6-31G* level of theory for C₃₀H₂₀, an equilibrium geometry is identified that has the form of polyhedral hydrocarbon with five carbon–carbon single bonds linking a dodecahedrane cage and a pentaprismane cage. Thus, this molecule is a tri-cage molecule with two pentaprismane cages and one dodecahedrane cage. Vibrational frequencies and the infrared spectrum are computed at the same level of theory. The heat of formation for C₃₀H₂₀ has been estimated in this paper. The heat of formation of C₃₀H₂₀ as well as the vibrational analysis indicates that this molecule enjoys sufficient stability to allow for its experimental preparation.