Determination of methylmercury fluxes across the air–water and air–soil interfaces by gas chromatography with electron capture detection

A method for the determination of methylmercury (MeHg) fluxes across the air–water and air–soil interfaces was developed using an in situ chamber. The MeHg in the air coming out of the chamber was captured by a column containing sulfhydryl cotton fiber adsorbent. MeHg was then desorbed from the column by using 2 mol L^–1 HCl. The MeHg in the effluent was extracted with benzene, and determined by gas chromatography with electron capture detection. Finally, the MeHg flux was calculated using the chamber. The method was applied to simulated experiments, and the results showed that the MeHg fluxes in the air–water system were higher than those in the air–soil–water system. The method was also successfully applied to the field measurements of an environment polluted by a chemical factory, and the results showed that the MeHg fluxes across the air–soil and air–water interfaces were 0.21–3.09 and 0.14–0.79 ng m^–2 h^–1, respectively. The method will be a useful tool in the environmental study of MeHg.     

CuAl2O4 powder synthesis by sol-gel method and its photodegradation property under visible light irradiation

Nanocrystalline spinel CuAl₂O₄ powders were prepared by sol-gel method from nitrate Cu(NO₃)₂·3H₂O, Al(NO₃)₃·9H₂O and complex C₆H₈O₇·H₂O. Sintering was carried out at 400, 500, 600, 700, 800°C respectively for 2 h in air. The XRD patterns started to appear CuAl₂O₄ peaks after sintering of 500°C and consist of only CuAl₂O₄ peaks as spinel crystal after sintering of 700°C. The powders were analyzed by TEM and UV-vis diffuse reflectance spectrum to be round, about 10–30 nm in size and Eg=1.77 eV. Photodegradation property of nanocrystalline CuAl₂O₄ powders was investigated by using methyl orange as model pollutant and mercury lamp (λ>400 nm) as energy source. The results indicated that CuAl₂O₄ powders sintered at 700°C had the excellent visible photocatalytic property. Under the irradiation of visible light, methyl orange could be degraded 97% in 120 min.     

Preparation and characterization of polytetrafluoroethylene‐polyacrylate core–shell nanoparticles

Polytetrafluoroethylene (PTFE)‐polyacrylate core–shell nanoparticles were produced by using PTFE micropowder and acrylate via seeded emulsion polymerization in the presence of fluorosurfactant. The properties of emulsion under various polymerization conditions were investigated and optimized. The chemical composition of the PTFE‐polyacrylate nanoparticles was characterized by Fourier‐transform infrared spectrometry (FTIR). The particle size and core–shell structure of the resulting PTFE‐polyacrylate nanoparticles were confirmed by transmission electron microscopy (TEM). Wettability of the PTFE‐polyacrylate core–shell particles was higher than the pristine PTFE. The formation of this kind of PTFE‐polyacrylate core–shell nanoparticles could improve the compatibility of PTFE with other materials because PTFE is covered by polyacrylate shell, which make them promising in various fields. Copyright © 2007 John Wiley & Sons, Ltd.     

Phototoxic and photochemical properties of sanguinarine.

Sanguinarine, a commercial drug exhibiting antimicrobial and antitumor properties, was studied with respect to its basic photochemical characteristics and also with regard to its phototoxicity to mosquito larvae (Aedes atropalpus). Sanguinarine proved to be clearly phototoxic to larvae, with an LD50 of 0.096 mg/mL with near UV exposure as compared with 23.3 mg/mL without. Flash photolysis experiments enabled the study of the triplet state of sanguinarine to be undertaken. Quenching by oxygen occurs with a rate constant of 6 x 10(9) M-1s-1 and time-resolved emission studies indicate that sanguinarine produces a significant amount of singlet oxygen (phi delta = 0.16) as does the isoquinoline alkaloid, berberine (phi delta = 0.25). These values represent the first direct quantitative measurements of photosensitization parameters of these compounds. Additionally, sanguinarine exhibits efficient electron donation properties, undergoing reaction with methyl viologen with a rate constant greater than 10(10) M-1s-1, but is a poor electron acceptor. Phototoxicity of sanguinarine can thus be explained in terms of its photosensitization properties.     

FT-IR and FT-raman spectroscopy study of the cyclic anhydride intermediates for esterification of cellulose: I. Formation of anhydrides without a catalyst

In recent years, extensive efforts have been made to find nonformaldehyde durable press finishes to replace the traditional formaldehyde-based reagents for producing wrinkle-free cotton fabrics. 1,2,3,4-butanetetracarboxylic acid (BTCA) has been the most effective nonformaldehyde crosslinking agent. Our previous research has indicated that a polycarboxylic acid esterifies cellulose in two steps: the formation of a 5-membered cyclic anhydride intermediate by the dehydration of two adjacent carboxyl groups, and the reaction between cellulose and the anhydride intermediate to form an ester linkage. In this research, we used Fourier transform infrared and Fourier transform Raman spectroscopy to study the formation of cyclic anhydride intermediates by BTCA and other polycarboxylic acids without the presence of a catalyst. We found that BTCA and other polycarboxylic acids in a crystalline state start to form 5-membered cyclic carboxylic anhydrides when the temperature reaches the vicinity of their melting points with the exception of bifunctional acids, which form cyclic anhydrides at temperatures much higher than their melting points. Intermolecular hydrogen bonding between carboxylic acid groups prevents the formation of the cyclic anhydride intermediates at lower temperatures. We also found that polycarboxylic acids in an amorphous state form cyclic anhydrides at much lower temperatures.     

Influence of drying procedure on the mesoporosity and surface fractal dimensions of silica xerogels prepared with different agitation methods

Silica xerogels were prepared by thermal drying wet gels in an electric oven (70 degrees C) after certain duration of ambient drying, and the relevant effect is investigated on the mesopore structures and surface fractal dimensions of the resultant xerogels. The silica gels were derived from a hydrochloric acid-catalyzed TEOS (tetraethylorthaosilicate) system, and both magnetic stirring and ultrasonic vibration were adopted during sol preparation. The percentage mesoporosity and surface fractal dimensions are evaluated using image analysis methods, based on FE-SEM (field emission gun-scanning electron microscopy) images. The results show that the mesoporosity of the resultant xerogels decreases with the duration of ambient drying for samples prepared using magnetic stirring and low-intensity ultrasonic vibration, while samples subjected to high-intensity ultrasound show a somewhat reverse trend. Samples prepared with magnetic stirring have almost constant surface fractal dimensions (nearly 3), irrespective of the ambient drying before thermal drying. The surface fractal dimensions of samples prepared using ultrasound increase with the duration of ambient drying.     

β-Cyclodextrin epichlorohydrin copolymer as a solid-phase extraction adsorbent for aromatic compounds in water samples

A novel solid-phase extraction (SPE) procedure for trace aromatic compounds in water samples has been developed using 12 aromatic compounds as model compounds and GC-MS and UV spectrophotometry for detection. The method is based on the fact that β-cyclodextrin (β-CD) epichlorohydrin (ECH) copolymer (β-CDEP) can extract non-ionized aromatic compounds quantitatively from aqueous samples. The polymer used is a colorless, transparent and insoluble solid with a maximum capacity of 0.82 μmol aromatic compounds per gram. It was synthesized by co-polymerization of β-CD and ECH and characterized by FT-IR and UV. β-CDEP does not contain double bonds, and therefore it does not have appreciable absorbance in the UV region. The optimum pH range for the extraction of aromatic compounds is 2.5-5.0. The method has high extraction efficiency with the recoveries between 90 and 101% for aromatic compounds at 0.02-1.67 ppm levels, and the analytes can be easily eluted by methanol washing after preconcentration.     

In situ Raman studies on lithiated single-wall carbon nanotubes in liquid ammonia

The charge transfer induced lithiation of single-wall carbon nanotubes (SWNTs) was investigated by in situ monitoring by Raman spectroscopy as lithium was added incrementally to a dispersion of SWNTs in liquid ammonia. Charge transfer from liquid ammonia solvated lithium to the SWNTs led to intercalation of lithium into the SWNT ropes, as well as to the semi-covalent lithiation of the SWNTs. Raman spectra of the SWNTs recorded as lithium was added showed a 30 wavenumber downshift of the G band (1594 cm⁻¹) with the concomitant appearance of a new peak at 1350 cm⁻¹ that was assigned as the signature of the lithiated SWNTs. Addition of 1-iodododecane to the lithiated SWNTs resulted in the covalent attachment of dodecyl groups. The intercalation of lithium throughout the SWNT ropes led to complete dodecylation of all individual SWNTs.