Thermal and dynamic mechanical analysis of cross-linked poly(esterurethanes)

New cross-linked poly(esterurethanes) (PEU) based on unsaturated olygo(alkyleneester)diol (OAE), 4,4’-diphenylmethane diisocyanate (MDI) and styrene or methyl methacrylate as curing monomers were prepared. The synthesis of PEU was performed in two steps. In the first step OAE was obtained from adipic acid, maleic anhydride and ethylene glycol. In the second step a prepolymer was obtained in a reaction of OAE with different amounts of 4,4’-diphenylmethane diisocyanate followed by crosslinking using previously mentioned curing monomers. The influence of structure of the poly(esterurethanes) on thermal and dynamic mechanical properties is studied. Thermogravimetric analysis shows that cross-linked poly(esterurethanes) demonstrate high thermal stability. Moreover the dynamic mechanical thermal analysis shows that the presence of styrene cross-linking chains in polymers lead to the phase separation in cross-linked poly(esterurethanes).     

Cation identity dependence of crown ether photonic crystal Pb<Superscript>2+</Superscript> sensing

We quantitatively modeled the volume phase transition of a hydrogel containing a crystalline colloidal array with a crown ether ligand which binds Pb²⁺. The hydrogel volume response and the wavelength diffracted depend on the Pb²⁺ concentration and on both the ionic strength and the valence of the nonbinding ionic species. We successfully modeled the response of this hydrogel Pb²⁺ sensor to ionic strength and the cation valence of the added salts. Figure Cation identity dependence of crown ether photonic crystal Pb⁺ sensing     

Instrumental modification intended to save time,and volumes of sample and reagent solutions,in the atomic fluorescence spectrometric determination of mercury

Use of small membrane pumps, instead of peristaltic pumps, to introduce sample and reagent solutions into the spectrometer has several advantages in atomic fluorescence spectrometric determination of mercury. This simple modification results in a substantial saving in the time required for the measurements and so 90% of reagent solution volumes and 95% of sample solution volumes are saved, with a consequent decrease in the volume of waste generated. The sampling frequency is almost tripled, with no deterioration in sensitivity, which is similar to that obtained by use of peristaltic pumps. The relative standard deviation for ten consecutive measurements of a 1 μg L⁻¹ mercury solution was approximately 2%. Figure Small membrane pumps for the atomic fluorescene spectro metric determination of mercury     

Citrate - Nitrate route for the synthesis and characterization of TAG using sol-gel techniques

Terbium Aluminum Garnet (TAG) is an important optically active material and is one of the best materials known for the fabrication of optical isolators. TAG has a large Verdet constant and has good transmission in the region of 350–1500 nm of the electromagnetic spectrum. It is also known that TAG melts incongruently at 1840°C. This makes efficient synthesis of TAG important and challenging and forms the motivation of the present work to develop techniques for the synthesis of TAG at lower temperatures. In the present work we report the synthesis of TAG using sol-gel techniques following the citrate-nitrate route. The prepared sample is sintered at various temperatures in presence of air and characterized using X-ray diffraction, FT-IR spectroscopy, energy dispersive X-ray Analysis and the morphology is observed using the scanning electron microscopy.     

Effects of incorporation of modified silica nanoparticles on the mechanical and thermal properties of PMMA

Silica nanoparticles of various sizes have been incorporated by melt compounding in a poly(methyl methacrylate) (PMMA) matrix to enhance its thermal and mechanical properties. In order to improve nanoparticles dispersion, PMMA grafted particles have been prepared by atom transfer radical polymerization (ATRP) from well-defined silica nanoparticles. This strategy was expected to ensure compatibility between both components of the PMMA nanocomposites. TEM analysis have been performed to evaluate the nanosilica dispersion whereas modified and non-modified silica/PMMA nanocomposites thermal stability and mechanical properties have been investigated by both thermogravimetric and dynamical mechanical analysis.     

Analysis of the temperature dependence of the high-frequency EMR spectra of Mn ions in the lithium-ion battery material LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript>

This paper deals with the analysis of the temperature dependence of high-frequency EMR (HF-EMR) spectra due to Mn³⁺ and Mn⁴⁺ ions in the lithium manganese spinel LiMn₂O₄. A range of powder samples obtained by the sol-gel method with calcinations in several temperature ranges were prepared for this study. Based on the initial characterization carried out by a number of techniques, the physicochemical and structural properties of the samples were earlier determined. Independently, temperature magnetization and HF-EMR measurements were carried out. The EMR spectra vary strongly between samples, indicating possible structural or chemical changes. Quantitative analysis of the temperature dependence of the HF-EMR spectra due to Mn³⁺ and Mn⁴⁺ ions in LiMn₂O₄ is presented in this paper. The spectral analysis concerns the line shape, linewidth, intensity and g-factors. Fittings using the Lorentzian spectral shape and, to a certain extent, the Gaussian spectral shape have been carried out in order to parameterize the temperature dependence of the HF-EMR spectra. This parameterization of the HF-EMR experimental data enables a deeper characterization of the samples. Subsequently, a better insight into the role of the Mn³⁺ and Mn⁴⁺ ions in accounting for the characteristics most suitable for application of LiMn₂O₄ as a cathode material may be gained.     

二氧化硅纳米与微米颗粒作为固定化酶载体的生物效应

分别将二氧化硅纳米颗粒(SiNPs)与微米颗粒(SiMPs)作为固定化载体, 选择多聚酶牛肝过氧化氢酶(CAT)和单体酶辣根过氧化物酶(HRP)作为酶模型, 通过考察酶固定化后在酶活回收率、热稳定性、 酶促反应最适温度以及酶在水-有机溶剂混合体系中催化能力的变化, 对载体与酶所产生的生物效应差异进行了系统研究. 酶活回收率结果表明, SiNPs显示出比SiMPs优越的对酶无选择性的高生物亲和性, 而SiMPs则能使固定于其上的酶热稳定性大幅度提高, 且二者都能使固定化酶在有机相中的稳定性得到明显增强. 但酶促反应最适温度的变化结果表明, 对不同类型的酶所产生的生物效应则表现出无规律性.     

Sol-gel polycondensation of methyltrimethoxysilane in ethanol studied by <Superscript>29</Superscript>Si NMR spectroscopy using a two-step acid/base procedure

Sol-gel polymerization of methyltrimethoxysilane (MTMS) in ethanol using a two-step acid/base catalyzed procedure (B2) is followed by ²⁹Si NMR spectroscopy. Analysis of the structural evolution of the B2 system shows that esterification of monomeric and end silicon species is rate-limited while that of linear and cyclic species is able to reach pseudoequilibrium in the second basic step. Condensation reactivity is reduced with increasing network connectivity, however, to a much less degree under B2 conditions than MTMS polymerization under acidic conditions. Steric effects as well as many other factors are attributed to this trend. The concentration of cyclic and polycyclic species of the B2 system is nearly 3 times lower compared to the acid-catalyzed system. The empirical degree of condensation at the gel point is determined to be 0.88. The effects of cyclization and phase separation on MTMS gelation are discussed for both B2 and acid-catalyzed systems. Based on these results it is believed that MTMS-based gels form for B2 and not acid-catalyzed conditions due to reduced cyclization, rapid hydrolysis and condensation, effective use of functional groups, and effective contribution of branched and polycyclic species as crosslinking points to connect polymeric chains in the B2 system.     

Detection of OH Radical in the Photodissociation of p-Aminobenzoic Acid at 266 nm

Photodissociation of p-aminobenzoic acid at 266 nm was investigated by probing the nascent OH photoproduct employing the laser-induced fluorescence technique. It was found that the nascent OH radical was vibrationally cold and its rotational state distribution conformed to be a Boltzmann behavior, characterized by a rotational temperature of 1040±110 K. The rotational energy of OH was determined to be 8.78±0.84 kJ/mol. Between the two spinorbit states of OH, ^2Ⅱ3/2 and ^2Ⅱ1/2, the former was found to be preferentially populated. The distribution of the II（A＇） state for the A-doublet was dominant. Finally, a probable mechanism for the formation of OH produced from the photodissociation of p-aminobenzoic acid is discussed.