Investigating the innate selectivity issues of methane to methanol: consideration of an aqueous environment

The higher reactivity of the methanol product over the methane reactant for the direct oxidation of methane to methanol is explored. C–H activation, C–O coupling, and C–OH coupling are investigated as key steps in the selective oxidation of methane using DFT. These elementary steps are initially considered in the gas phase for a variety of fcc (111) pristine metal surfaces. Methanol is found to be consistently more reactive for both C–H activation and subsequent oxidation steps. With an aqueous environment being understood experimentally to have a profound effect on the selectivity of this process, these steps are also considered in the aqueous phase by ab initio molecular dynamics calculations. The water solvent is modelled explicity, with each water molecule given the same level of theory as the metal surface and surface species. Free energy profiles for these steps are generated by umbrella sampling. It is found that an aqueous environment has a considerable effect on the kinetics of the elementary steps yet has little effect on the methane/methanol selectivity-conversion limit. Despite this, we find that the aqueous phase promotes the C–OH pathway for methanol formation, which could enhance the selectivity for methanol formation over that of other oxygenates.

Consideration of the selectivity of methane to methanol in the aqueous phase with AIMD.     

Nanopatterning of alkynes on hydrogen-terminated silicon surfaces by scanning probe-induced cathodic electrografting

The electrochemical cathodic electrografting reaction, previously demonstrated on bulk silicon surfaces, can be patterned on the nanoscale utilizing conducting probe atomic force microscopy (CP-AFM). Alkyne electrografting is a particularly useful chemical technique since it leads to direct covalent attachment of conjugated alkynes to silicon. In addition, application of a forward bias during the reaction renders the surface less sensitive to oxidation and the resulting monolayers are very stable in air and basic aqueous solution. Alkyne monolayer lines can be drawn down to 40 nm resolution using a Pt-coated AFM tip, and the heights of the monolayers scale with the molecular length of the alkyne. The tip is biased (+) and the surface is biased (-) to drive the cathodic electrografting reaction under ambient conditions. The resistance of the monolayers to fluoride, as well as friction force microscopy, indicate that the alkynes are covalently bonded to the surface, not oxide-based, and hydrophobic. The reaction does not work with alkenes, and therefore hydrosilylation is not the primary mode of reaction. Wider lines (300 nm) can be produced using broadened Pt-coated AFM tips. This reaction could be important for the interfacing of conjugated molecules directly to silicon in a spatially controlled fashion.     

Effects of Concentration on Hexaaquacobalt(II)/Tetrachlorocobalt(II) Equilibrium. A Discovery-Oriented Experiment for Chemistry Students

A solution of cobalt(II) chloride in HCI is commonly used to examine various effects, such as changes in temperature and concentration, on the Co(H₂O)₆²⁺/CoCl₄^2– equilibrium (Lc Chaâtcliers principle). In aqucous solution the cobalt(II) ion exists as a mixture of two complex ions at equilibrium, blue CoCl₄^2– and pink Co(H2O)₆²⁺. As the ions have different colors, it is easy to determine the position of the equilibrium. A series of experiments was designed to allow students to examine the concentration of chloride ion, the dehydration effect, and how dissociation effects the equilibrium. Different compounds were added to the aqueous solution of cobalt(II) ion, and the position of the equilibrium was determined either visually or, more quantitatively, by means of UV–vis spectroscopy. This exercise is suitable for general chemistry students and is designed to introduce them to the complexity of the actual chemical reaction rather than presenting them with a simplistic model.     

Practical aspects of fast HPLC separations for pharmaceutical process development using monolithic columns

A large number of samples can be generated during pharmaceutical process development. Fast separation for these samples is usually challenging due to the complexity of sample matrix, which requires high efficiency as well as high speed. Monolithic columns (E. Merck, Germany) were investigated as a possible tool for reducing separation time in reversed-phase HPLC without significantly sacrificing efficiency or resolution. Both van Deemter plots and separations of alkyl benzenes and in-process samples showed that monolithic columns were suitable for fast separations without significantly compromising resolution. Practical parameters including the pressure drop, retention factor, selectivity, and tailing factor of monolithic columns (Chromolith type) were compared to those of conventional YMC 150 mm × 4.6 mm (3-μm particles) and 250 mm × 4.6 mm (5-μm particles) packed columns. The batch-to-batch reproducibility of the 100 mm × 4.6 mm Chromolith columns from five randomly ordered batches was also compared to the 250 mm × 4.6 mm YMC particle-packed columns. Fast and efficient separations of complicated process samples including crude drug substances, reaction mixtures, and crystallized mother liquors were demonstrated for both monolithic columns and conventional packed columns. The analysis times were decreased by three to seven times on the coupled monolithic columns, while maintaining the comparable resolution to typical 5-μm particle-packed 250 mm × 4.6 mm columns.     

Reactions of stabilized criegee intermediates from the gas‐phase reactions of O3 with selected alkenes

The gas‐phase reactions of O₃ with 1‐octene, trans‐7‐tetradecene, 1,2‐dimethyl‐1‐cyclohexene, and α‐pinene have been studied in the presence of an OH radical scavenger, primarily using in situ atmospheric pressure ionization tandem mass spectrometry (API‐MS), to investigate the products formed from the reactions of the thermalized Criegee intermediates in the presence of water vapor and 2‐butanol (1‐octene and trans‐7‐tetradecene forming the same Criegee intermediate). With H₃O⁺(H₂O)_n as the reagent ions, ion peaks at 149 u ([M + H]⁺) were observed in the API‐MS analyses of the 1‐octene and trans‐7‐tetradecene reactions, which show a neutral loss of 34 u (H₂O₂) and are attributed to the α‐hydroxyhydroperoxide CH₃(CH₂)₅CH(OH)OOH, which must therefore have a lifetime with respect to decomposition of tens of minutes or more. No evidence for the presence of α‐hydroxyhydroperoxides was obtained in the 1,2‐dimethyl‐1‐cyclohexene or α‐pinene reactions, although the smaller yields of thermalized Criegee intermediates in these reactions makes observation of α‐hydroxyhydroperoxides from these reactions less likely than from the 1‐octene and trans‐7‐tetradecene reactions. Quantifications of 2,7‐octanedione from the 1,2‐dimethyl‐1‐cyclohexene reactions and of pinonaldehyde from the α‐pinene reactions were made by gas chromatographic analyses during reactions with cyclohexane and with 2‐butanol as the OH radical scavenger. The measured yields of 2,7‐octanedione from 1,2‐dimethyl‐1‐cyclohexene and of pinonaldehyde from α‐pinene were 0.110 ± 0.020 and 0.164 ± 0.029, respectively, and were independent of the OH radical scavenger used. Reaction mechanisms are presented and discussed. © 2001 Wiley Periodicals, Inc. Int J Chem Kinet 34: 73–85, 2002     

Analysis and simulation of the structure of nanoparticles that undergo a surface-driven structural transformation

A room temperature solid-state structural transformation was observed in 3 nm ZnS nanoparticles in methanol following the addition of water (Zhang et al., Nature 424, 1025, 2003). Experimental wide angle x-ray scattering (WAXS), x-ray absorption near edge structure (XANES) and extended x-ray absorption fine structure (EXAFS) spectroscopy measurements show a large increase in crystallinity associated with water addition, in agreement with molecular dynamics (MD) predictions. Here we perform first-shell EXAFS and pair distribution function analysis and whole-nanoparticle calculations of WAXS, EXAFS and XANES to compare structural data with the MD predictions. The predicted WAXS patterns give excellent agreement with data, while the predicted EXAFS and XANES spectra give poor agreement. Relative to WAXS, XANES and EXAFS spectra contain additional structural information related to the distribution of disorder. The discrepancy between the x-ray diffraction and x-ray absorption results indicates that structural disorder is partitioned between interior and surface regions more strongly than predicted in the MD simulations.     

Vapor pressures and sublimation enthalpies of seven heteroatomic aromatic hydrocarbons measured using the Knudsen effusion technique

The vapor pressures of seven heteroatom-containing cyclic aromatic hydrocarbons, ranging in molecular weight from (168.19 to 208.21) g · mol^?1 were measured over the temperature range of (301 to 486) K using the isothermal Knudsen effusion technique. The compounds measured include: anthraquinone, 9-fluorenone, 9-fluorenone oxime, phenoxazine, phenoxathiin, and 9H-pyrido[3,4-b]indole. These solid-state sublimation measurements provided values that are compared to vapor pressures of parent aromatic compounds (anthracene and fluorene) and to others with substituent groups in order to examine the effects of alcohol, ketone, pyridine, and pyrrole functionality on this property. The enthalpies and entropies of sublimation for each compound were determined from the Clausius–Clapeyron equation. Though there is no consistent trend in terms of the effects of substitutions on changes in the enthalpy or entropy of sublimation, we note that the prevalence of enthalpic or entropic driving forces on vapor pressure depend on molecule-specific factors and not merely molecular weight of the substituents.     

Almost disjoint large subsets of semigroups

There are several notions of largeness in a semigroup S that originated in topological dynamics. Among these are thick, central, syndetic and piecewise syndetic. Of these, central sets are especially interesting because they are partition regular and are guaranteed to contain substantial combinatorial structure. It is known that in (N,+) any central set may be partitioned into infinitely many pairwise disjoint central sets. We extend this result to a large class of semigroups (including (N,+)) by showing that if S is a semigroup in this class which has cardinality κ then any central set can be partitioned into κ many pairwise disjoint central sets. We also show that for this same class of semigroups, if there exists a collection of μ almost disjoint subsets of any member S, then any central subset of S contains a collection of μ almost disjoint central sets. The same statement applies if “central” is replaced by “thick”; and in the case that the semigroup is left cancellative, “central” may be replaced by “piecewise syndetic”. The situation with respect to syndetic sets is much more restrictive. For example, there does not exist an uncountable collection of almost disjoint syndetic subsets of N. We investigate the extent to which syndetic sets can be split into disjoint syndetic sets.