MAFF — The Munich accelerator for fission fragments

At the new high flux reactor FRM-II in Munich the accelerator MAFF (Munich accelerator for fission fragments) is under design. In the high neutron flux of 10¹⁴ n/cm² s up to 10¹⁴ neutron-rich fission fragments per second are produced in the 1 g U-235 target. Ions with an energy of 30 keV are extracted from the ion source. In the mass separator two isotopes can be selected. One of the beams is used for low energy experiments, the other one is injected into an ECRIS (or EBIS) for charge breeding to a q/A≥0.16. A gas filled RFQ cooler is used for emittance improvement. The subsequent LINAC delivers beams with an energy ranging from 3.7 MeV/u to 5.9 MeV/u. New IH structures are being developed at the Munich tandem laboratory. A small storage ring is planned in a further stage to recycle the fission fragments. A thin target foil can be placed into this ring, e.g., for synthesis of super-heavy elements. The through-going beam tube has been installed in the heavy water tank of the reactor. Tests of the target ion source in a special oven to test long term stability and safety tests were in progress.     

The operational performance of the Yale ESTU

The ESTU began operation in 1988 and achieved the design voltage of 20 MV in 1990. Since that time, improvements to the gas handling system, negative ion injector, accelerator terminal and control system have greatly increased its capability and reliability. Today, the ESTU can efficiently produce an extensive assortment of stable ions at wide-ranging energies in support of low-energy nuclear physics.     

Riemannian Geometry of Quantum Groups¶and Finite Groups with Nonuniversal Differentials

We construct noncommutative “Riemannian manifold” structures on dual quasitriangular Hopf algebras such as ℂ _q [SU ₂] with its standard bicovariant differential calculus, using the quantum frame bundle approach introduced previously. The metric is provided by the braided-Killing form on the braided-Lie algebra on the tangent space and the n-bein by the Maurer–Cartan form. We also apply the theory to finite sets and in particular to finite group function algebras ℂ[G] with differential calculi and Killing forms determined by a conjugacy class. The case of the permutation group ℂ[S ₃] is worked out in full detail and a unique torsion free and cotorsion free or “Levi–Civita” connection is obtained with noncommutative Ricci curvature essentially proportional to the metric (an Einstein space). We also construct Dirac operators in the metric background, including on finite groups such as S ₃. In the process we clarify the construction of connections from gauge fields with nonuniversal calculi on quantum principal bundles of tensor product form. Received: 22 June 2000 / Accepted: 26 August 2001     

The Geometric Construction of WZW Effective Action in Noncommutative Manifold

By constructing close-one-cochain density Ω^12n in the gauge group space we get the Wess-Zumino-Witten (WZW) effective Lagrangian on high-dimensional noncommutative space.Especially consistent anomalies derived from this WZW effective action in noncommutative four-dimensional space coincide with those obtained by L.Bonora etc.(het-th/0002210).     

Interference of circularly polarized light: contrast and application in fabrication of three-dimensional periodic microstructures

The contrast of interference pattern formed by two circularly polarized waves and by a linearly polarized wave and a circularly polarized one is discussed. The results are compared with that by two linear beams. It shows that the use of circular light in holographic fabrication of three-dimensional periodic microstructures may remove the necessity of beam ratio and polarization optimization needed in the interference of three linear noncoplanar beams and improve the uniform contrast of resultant pattern simultaneously.     

ICP-AES法测定滑石中主次量成分

本文报道了采用ICP－AES法测定滑石中的成分。将滑石试样经碳酸钠、硼砂混合熔剂熔融、酸浸取，用电感耦合等离子体原子发射光谱法（ICP－AES）同时测定SiO2,MgO,CaO,Al2O3,Fe2O3，方法回收率在98.8%-104.0%，测定的RSD(n=6)在0.12%-0.24%之间，测试结果与部颁标准的化学分析法基本相符。     

稀土配合物中重叠峰分离的相分辨光声光谱研究

首次利用相分辨光声光谱法对稀土配合物中不同吸收中心的重叠谱峰进行了分离。在Nd(Trp) 3 Cl3 ·H2 O固态配合物中 (Trp :色氨酸 ) ,30 0～ 4 0 0nm这一波段内由于色氨酸配体强的π π 跃迁吸收 ,Nd3 +的光声峰被掩盖。通过光声谱同相和交相信号可以计算配体光声吸收的位相为 10 6° ,位相改变 90°后就得到仅与Nd3 +相关的光声光谱。相分辨光声光谱法用于谱峰分离时有它独特的优点 ,它不受谱峰形状和重叠程度的限制 ,而仅与不同吸收峰对应的光声位相有关     

人体胆结石难溶物的扫描电镜观察和红外光谱研究

用傅里叶变换红外光谱仪和扫描电镜研究了胆色素型和混合型胆结石经氯仿、乙醇、乙醚、盐酸等溶剂溶解剩余的主要组分和微观结构。结果表明，胆红素盐、蛋白质、脂肪酸盐、碳酸钙等为难溶物；棕色色素胆石中的蛋白质的二级结构似a-螺旋为主。扫描电镜观察显示，在色素型和混合型胆石难溶物中都出现了可能为蛋白质的薄膜带状物，讨论了难溶物与结石形成的关系。     

武定恐龙化石的显微拉曼光谱研究

本文首次利用激光显微拉曼光谱、原子光谱和偏光显微镜等方法 ,对云南武定的恐龙化石进行了分析研究。实验发现 ,恐龙化石表面和截面的拉曼光谱 ,均为典型的方解石 (CaCO3 )晶体的拉曼谱 ,并未发现有其他成分的拉曼谱。原子发射光谱的分析结果表明 ,恐龙化石中的主要元素有Ca(>10 % ) ,其次是Si(5 0 % )和P(4 0 % ) ,还有Fe(1 0 % )等 ,但未发现铱、钍等稀有元素。由恐龙化石截面在偏光显微镜下的图像可以知道 ,恐龙化石表面层的成分主要是方解石晶体 ;内部的主要成分为方解石 (CaCO3 )晶体 ,此外还有纤维状一水二氧化硅 (分子式SiO2 ·nH2 O ,属非晶态 )等成分。激光拉曼光谱能快速无损地准确检测出恐龙化石的主要成分是方解石 (CaCO3 ) ,拉曼光谱对恐龙化石的分析结果与原子光谱、偏光显微镜的分析结果是一致的     

原子捕集-火焰原子吸收光谱法测定中草药中痕量镉

考察了火焰条件、捕集管与燃烧器和光束的距离、冷却水流量、捕集时间等实验条件对原子捕集 火焰原子吸收光谱法测定镉的灵敏度的影响 ,实验优选出的最佳实验条件为 :乙炔流量 90L·h- 1 ,捕集管距离燃烧器缝口 5mm ,捕集管距离光束 2mm ,冷却水流量 1 5L·min- 1 ;采用 5 0ng·mL- 1 的镉标准溶液对吸光度与捕集时间的关系进行了考察 ,结果发现 ,在 0～ 6min的捕集时间内二者呈良好的线性关系。在最佳实验条件下 ,捕集时间为 2min时 ,镉的特征浓度为 1 8ng·mL- 1 ,检出限为 0 4 2ng·mL- 1 ,分别较常规火焰原子吸收光谱法的特征浓度和检出限改善了 16倍和 5倍 ,方法的精密度 (RSD)为 1 8%。利用所建立的原子捕集 火焰原子吸收光谱法 ,在最佳实验条件下 ,对人参、丹参、苦参和党参及其水煎液中的痕量镉进行了测定 ,样品的测定回收率在 89 5 %～ 10 4 %之间 ,结果令人满意。