Manipulation of Supramolecular Columnar Structures of H-Bonded Donor-Acceptor Units through Geometrical Nanoconfinement

Ambipolar organic semiconductors are considered promising for organic electronics because of their interesting electric properties. Many hurdles remain yet to be overcome before they can be used for practical applications, especially because their orientation is hard to control. We demonstrate a method to control the orientation of columnar structures based on a hydrogen (H)-bonded donor-acceptor complex between a star-shaped tris(triazolyl)triazine and triphenylene-containing benzoic acid, using physicochemical nanoconfinement. The molecular configuration and supramolecular columnar assemblies in a one-dimensional porous anodic aluminium oxide (AAO) film were dramatically modulated by controlling the pore-size and by chemical modification of the inner surface of the porous AAO film. In situ experiments using grazing-incidence X-ray diffraction (GIXRD) were carried out to investigate the structural evolution produced at the nanometer scale by varying physicochemical conditions. The resulting highly ordered nanostructures may open a new pathway to effectively control the alignment of liquid crystal ambipolar semiconductors.     

Mannose‐Modified Serum Exosomes for the Elevated Uptake to Murine Dendritic Cells and Lymphatic Accumulation

The surface of bovine serum‐derived exosomes (EXOs) are modified with α‐d ‐mannose for facile interaction with mannose receptors on dendritic cells (DCs) and for efficient delivery of immune stimulators to the DCs. The surface of the EXOs is modified with polyethylene glycol (PEG) without particle aggregation (≈50 nm) via the incorporation of 1,2‐distearoyl‐sn‐glycero‐3‐phosphoethanolamine (DSPE) into the lipid layer of the EXO, compared to chemical conjugation by N‐hydroxysuccinimide activated PEG (NHS‐PEG). PEG modification onto the exosomal surface significantly decreases the non‐specific cellular uptake of the EXOs into the DCs. However, the EXOs with mannose‐conjugated PEG‐DSPE (EXO‐PEG‐man) exhibit excellent intracellular uptake into the DCs and boost the immune response by the incorporation of adjuvant, monophosphoryl lipid A (MPLA) within the EXO. After an intradermal injection, a higher retention of EXO‐PEG‐man is observed in the lymph nodes, which could be used for the efficient delivery of immune stimulators and antigens to the lymph nodes in vivo.     

Experimental Determination of the Burning Velocity of Mixtures of n-Heptane and Toluene in Engine-like Conditions

Although the burning velocities of fuel-air mixtures have been extensively studied at room temperature and pressure, there is relatively little experimental information available for elevated temperatures and pressures (the so-called engine like conditions). Therefore, the main aim of the present work is to generate accurate experimental burning velocities valid over a range of high unburned gas temperatures and pressures of a variety of mixtures of n-heptane and toluene, varying its proportion by 25% in volume each time. Two experimental combustion facilities have been used and their results compared. One facility consists of a constant volume cylindrical bomb in which Schlieren images can be recorded and used to calculate the flame front development. The second facility is a spherical combustion bomb with centred ignition in which burning velocities are calculated from pressure records by means of a two-zone model. In order to check that the pressure method is reliable, experiments with n-heptane at room temperature and pressure for different equivalence ratios carried out in the spherical combustion bomb were compared with the ones obtained at the same conditions in the cylindrical vessel equipped with the Schlieren technique. Once the validity has been checked, extensive experiments have been carried out for widely varying initial conditions of pressure between 0.3 and 0.7?MPa, temperature between 363?K and 453?K and equivalence ratios from 0.8 to 1.1. Over the ranges studied, by removing the influence of the ignition energy at the earliest stages of combustion and the quenching effects at the later ones, the burning velocities are fitted by a correlation of type $ Cc=Cc_{r}\cdot (T_{ub}/T_{r})^{\varepsilon }\cdot (P/P_{r})^{\beta } $ , where Cc _r , ?? and ?? depend on the equivalence ratio. The ranges of validity of the correlations obtained cover from 370?K to 700?K, from 0.3?MPa to 4.5?MPa, and from 0.8 to 1.1 equivalence ratio. A comparison with previous predicted values is also given.     

Effect of boehmite nanorods on the properties of glycidoxypropyl-trimethoxysilane (GPTS) hybrid coatings

AlOOH boehmite nanorods, synthesized by a solid-based process, were incorporated into a sol–gel coating in which GPTS was used as a precursor. Transparent composite coatings with nanorod content up to 40 wt% were obtained by spin coating the sol–gel mixture on glass substrates. Nanorods in the coating were found be aligned parallel to the substrate surface. Mechanical properties, such as modulus and hardness of the nanorod filled coating, were slightly lower than coatings of the same composition but filled with commercially available nanosized boehmite particles. However, crack toughness was greatly improved, as supported by nanoindentation test results. The improvement in crack toughness was attributed to the high aspect ratio of the rigid nanorods, in addition to the fact that the nanorods were aligned within the composite parallel to the surface.     

Study of immobilized metal affinity chromatography sorbents for the analysis of peptides by on‐line solid‐phase extraction capillary electrophoresis‐mass spectrometry

Several commercial immobilized metal affinity chromatography sorbents were evaluated in this study for the analysis of two small peptide fragments of the amyloid β‐protein (Aβ) (Aβ(1–15) and Aβ(10–20) peptides) by on‐line immobilized metal affinity SPE‐CE (IMA‐SPE‐CE). The performance of a nickel metal ion (Ni(II)) sorbent based on nitrilotriacetic acid as a chelating agent was significantly better than two copper metal ion (Cu(II)) sorbents based on iminodiacetic acid. A BGE of 25 mM phosphate (pH 7.4) and an eluent of 50 mM imidazole (in BGE) yielded a 25‐fold and 5‐fold decrease in the LODs by IMA‐SPE‐CE‐UV for Aβ(1–15) and Aβ(10–20) peptides (0.1 and 0.5 μg/mL, respectively) with regard to CE‐UV (2.5 μg/mL for both peptides). The phosphate BGE was also used in IMA‐SPE‐CE‐MS, but the eluent needed to be substituted by a 0.5% HAc v/v solution. Under optimum preconcentration and detection conditions, reproducibility of peak areas and migration times was acceptable (23.2 and 12.0%RSD, respectively). The method was more sensitive for Aβ(10–20) peptide, which could be detected until 0.25 μg/mL. Linearity for Aβ(10–20) peptide was good in a narrow concentration range (0.25–2.5 μg/mL, R² = 0.93). Lastly, the potential of the optimized Ni(II)‐IMA‐SPE‐CE‐MS method for the analysis of amyloid peptides in biological fluids was evaluated by analyzing spiked plasma and serum samples.     

Combination of magnetic susceptibility and electron paramagnetic resonance to monitor the 1D to 2D solid state transformation in flexible metal-organic frameworks of Co(II) and Zn(II) with 1,4-bis(triazol-1-ylmethyl)benzene

Two families of coordination polymers, {[M(btix)(2)(OH(2))(2)]·2NO(3)·2H(2)O}(n) [M = Co (1), Zn (2), Co-Zn (3); btix = 1,4-bis(triazol-1-ylmethyl)benzene] and {[M(btix)(2)(NO(3))(2)]}(n) [M = Co (4), Zn (5), Co-Zn (6)], have been synthesized and characterized. The two conformations of the ligand, syn and anti, lead to one-dimensional (1D) cationic chains or two-dimensional (2D) neutral grids. Extrusion of the water molecules of the 1D compounds results in an irreversible transformation into the 2D compounds, which involves a change in conformation of the btix ligands and a rearrangement in the metal environment with cleavage and reformation of covalent bonds. This structural transformation has been followed by electron paramagnetic resonance (EPR) and magnetic susceptibility measurements to monitor the minor modifications that the metal centers suffer.     

Insertion of a spin crossover Fe(III) complex into an oxalate-based layered material: coexistence of spin canting and spin crossover in a hybrid magnet

The syntheses, structures, and magnetic properties of the compounds of formula [Fe (III)(sal 2trien)] 2[Mn (II) 2(ox) 3].4H 2O.C 3H 7NO ( 1) and [In (III)(sal 2trien)] 2[Mn (II) 2(ox) 3].3H 2O.CH 3OH (2) are reported. The structure presents a homometallic 2D honeycomb anionic layer formed by Mn (II) ions linked through oxalate ligands and a cationic double layer of [Fe(sal 2trien)] (+) or [In(sal 2trien)] (+) complexes intercalated between the 2D oxalate network. The magnetic properties and M?ssbauer spectroscopy of 1 indicate the coexistence of a magnetic ordering of the Mn(II) oxalate network that behaves as a weak ferromagnet and a gradual spin crossover of the intercalated [Fe(sal 2trien)] (+) complexes.     

Ionic liquid matrices for MALDI-TOF-MS analysis of intact glycoproteins

2,5-Dihydroxybenzoic acid (DHB) has been demonstrated to be a more suitable matrix than 3,5-dimethoxy-4-hydroxycinnamic acid (sinapinic acid, SA) to obtain reliable molecular mass values of intact glycoproteins because it prevents sugar fragmentation. Lack of spot homogeneity during the crystallization step was prevented by drying the sample-matrix mixture under vacuum conditions. Nevertheless, this sample-matrix preparation procedure requires a specific experimental setup and may be time-consuming. In this work, we investigated the effectiveness of different ionic liquid matrices (ILMs) with SA and DHB on the ionization of a set of intact glycoproteins with several degrees of glycosylation. The obtained results demonstrate that some of the tested ILMs allow detection of the studied intact glycoproteins. Furthermore, the selected optimum conditions solve the reproducibility issue of using the DHB as a solid matrix without the vacuum drying method and, surprisingly, avoid sugar fragmentation when both SA and DHB were used as ILMs.     

Pressure-tuning of magnetism and linkage isomerism in iron(II) hexacyanochromate

A pressure-induced linkage isomerization of the cyanide anion has been observed in single crystals of a chromium(III)-iron(II) Prussian blue analogue of formula K0.4Fe4[Cr(CN)6]2.8 square1.2.16H2O (1). Upon application of pressure in the 0-1200 MPa range, the cyanide ligand rotates and becomes C-bonded to the iron(II) cations, leading to a stabilization of their diamagnetic low-spin states. The result is a decrease of magnetization and magnetic ordering temperatures from TC = 19 K at ambient pressure to 13 K at 1200 MPa. The initial magnetic properties can be restored on pressure release. The reversible movement of cyanide in the solid state can be exploited as a switch of the magnetic interaction at the molecular level.