Photopolymerization induced by a benzophenone derivative photoinitiator

A benzophenone derivative photoinitiator, HBP-TDI-HQ-TDI-HBP （HTCTH）, was synthesized based on 4-hydroxy benzophenone （HBP）, toluene-2,4-diisocyanate （TDI） and hydroquinone （HQ）. HTCTH was a more effective photoinitiator which had longer wavelength absorption in the UV-vis absorption spectra than the low molecular counterpart benzophenone （BP）. It showed that both rate of polymerization （Rp） and final conversion （P） increased with increase of amine and HTCTH concentration in photopolymerization.     

反相高效液相色谱法的多波长同时测定预混合饲料中的脂溶性维生素A，α－E，D_3，K_3

反相高效液相色谱法的多波长同时测定预混合饲料中的脂溶性维生素Ａ，α－Ｅ，Ｄ＿３，Ｋ＿３李桂凤，李缙扬，郝征红，聂燕，孟兆宏，李学春（山东省农业科学院中心实验室济南２５０１００）１前言对脂溶性维生素的分析，被许多国内外分析专家认为是高难度的分析项目。本...     

Investigation of the effects of Au-colloid modification on cobalt hexacyanoferrate film growth and mass transport by electrochemical quartz crystal microbalance

The growth of cobalt hexacyanoferrate (CoHCF) films on bare and Au-colloid-modified electrodes in nitrate or sulfate solutions was monitored by electrochemical quartz crystal microbalance. The average efficiency of CoHCF film growth for Au colloid modified electrodes is 23 and 12 ng cm(-2) s(-1) in KNO3 and K2SO4 solutions, respectively, while those values for the bare gold electrode are 15 and 9 ng cm(-2) s(-1), respectively. In K2SO4 solution, the apparent molar masses for the Au-colloid-modified electrode at lower and higher potential is 58.4 and 37.3 g mol(-1), respectively, which is larger than those for the bare gold electrode (51.7 and 26.3 g mol(-1), respectively). The respective results were also obtained in KNO3 solution. Furthermore, the difference of the apparent molar masses at lower and higher potential for Au-colloid-modified electrodes is smaller than that for bare gold electrodes in the same electrolyte. Additionally, the mechanism of charge propagation is dependent on different anions in electrolyte solutions at higher potentials where the second redox reaction of CoHCF occurs. Therefore, the existence of Au colloids can accelerate CoHCF film growth and weaken the effect of anions on mass transport.     

Quantum dot nanocrystals for in vivo molecular and cellular imaging

Semiconductor quantum dots (QD) are nanometer-sized crystals with unique photochemical and photophysical properties that are not available from either isolated molecules or bulk solids. In comparison with organic dyes and fluorescent proteins, QD are emerging as a new class of fluorescent labels with improved brightness, resistance against photobleaching and multicolor fluorescence emission. These properties could improve the sensitivity of biological detection and imaging by at least 10- to 100-fold. Further development in high-quality near-infrared-emitting QD should allow ultrasensitive and multicolor imaging of molecular targets in deep tissue and living animals. Here, we discuss recent developments in QD synthesis and bioconjugation, applications in molecular and cellular imaging as well as promising directions for future research.     

Study of a molecular imprinting polymer coated BAW bio-mimic sensor and its application to the determination of caffeine in human serum and urine

A bio-mimic bulk acoustic wave (BAW) sensor was fabricated by coating the caffeine (CAF) template molecular imprinting polymer (MIP). This sensor exhibited high selectivity and a sensitive mass response to CAF. The response range of the sensor was between 5.0 x 10(-9) and 1.0 x 10(-4) M with a detection limit of 5.0 x 10(-9) M at pH 8.0. Recoveries were 96.1-105.6%. Influencing factors were investigated in detail and optimized. When employed to detect real samples, the proposed method proved to be a convenient method with the advantages of high sensitivity, good selectivity and ease of handling.     

Electropolymerized m-phenylenediamine as a means to immobilize active protein on thickness-shear-mode quartz crystal

Electropolymerized m-phenylenediamine was used as an active coating for immobilizing urease and lectin on a gold-plated thickness-shear-mode (TSM) crystal. To enhance effectiveness of immobilization. a bilayer polymer film composed of polyaniline and poly-m-phenylenediamine was proposed. Compared with single poly-m-phenylenediamine film, the bilayer polymer film gave better results in terms of immobilizing capacity, stability and reproductivity. On this bilayer-film-coated TSM quartz crystal, the amount of immobilized lectin was estimated about 1.8 mug/cm(2). Detection of purified human erythrocytes is demonstrated as an example of potential application of this lectin-modified TSM biosensor in clinic.     

具有全氟丁基磺酰亚胺基侧链的聚磷腈的合成

本文合成了一种新的具有全氟丁基磺酰亚胺基侧链的聚磷腈高分子。并用¹H NMR、 ¹⁹F NMR、 IR光谱、凝胶渗透色谱以及热重分析等方法, 对其结构和性质进行了表征。     

116例冠心病患者血清中钙镁镉铅铍含量的探讨

测定了１１６例冠心病患者血清中钙、镁、镉、铅、铍的含量并与正常对照组比较。结果显示，常量元素钙、镁与微量元素镉、铅含量降低，而铍的含量升高。它们之间的差异有显著性或高度显著性，Ｐ〈０．０５或Ｐ〈０．０１。     

A nonlinear regression model applied to kinetic studies of ester hydrolysis with a surface acoustic wave sensor

A non-linear regression model was derived for the simultaneous determination of the rate constant in alkaline hydrolysis of esters and the initial concentration of esters based on the linear relationship between the frequency response of the surface acoustic wave sensor system and the conductivity of the solution. The model was tested theoretically and experimentally with the methyl-, ethyl-, and n-propyl-acetate systems. The corresponding rate constants estimated at 25 degrees C are 0.147, 0.103 and 0.0671 respectively.     

Alloyed semiconductor quantum dots: tuning the optical properties without changing the particle size

Alloyed semiconductor quantum dots (cadmium selenium telluride) with both homogeneous and gradient internal structures have been prepared to achieve continuous tuning of the optical properties without changing the particle size. Our results demonstrate that composition and internal structure are two important parameters that can be used to tune the optical and electronic properties of multicomponent, alloyed quantum dots. A surprising finding is a nonlinear relationship between the composition and the absorption/emission energies, leading to new properties not obtainable from the parent binary systems. With red-shifted light emission up to 850 nm and quantum yields up to 60%, this new class of alloyed quantum dots opens new possibilities in band gap engineering and in developing near-infrared fluorescent probes for in vivo molecular imaging and biomarker detection.