轨道对称性匹配:MXene基体上的单原子催化以实现优异的氮还原反应

氨作为一种可被植物直接吸收用以合成其他有机物的重要成分,在化学化工及含氮化合物的生产当中起着至关重要的作用.传统工业生产氨气采用Haber-Bosch工艺,将空气中丰富的氮气转化为氨气,但该工艺需要较高的压强和温度来促进氮气分解,因此会消耗大量能源.近年来,电催化反应发展迅速.在电催化工艺中,通过控制操作电位及电解质便可提高生产效率,降低能源消耗.基于这种策略,各种针对能源环境的催化研究应运而生,如二氧化碳还原、水分解反应等.其中,对于氮还原的催化研究尤其是电催化设计领域研究相对较少.研究发现,在电催化剂中,异构掺杂及原子尺度的调控可以极大地影响催化剂的催化活性.其中,单原子催化(SAC)因其在催化活性和催化选择性上的优势受到广泛关注.MXene是一种二维过渡金属碳化物或氮化物,其优异的化学性能和稳定的表面构型可以对单原子起到良好的锚定与支撑作用,是一种更具潜力的单原子催化基体.本文基于上述思想,利用密度泛函第一性原理等模拟软件,设计并研究了以MXene为基体的28种过渡金属单原子催化体系,计算并分析了各SAC@MXene体系对氮还原反应的催化效果,从限制电势、催化路径、反应机制等方面探索了其催化性能.并对体系进行了态密度、晶体轨道哈密顿量、差分电荷密度等电子结构分析,找到了适用于MXene体系的单原子催化设计原则.通过对限制电势的计算表明,Ni@MXene和Co@MXene体系具有很低的限制电势(-0.13和-0.17 V),说明这些体系在较低的启动电压下即可发生氮还原反应.研究发现了一种新型适用于SAC@MXene氮催化体系的酶促-远端反应机制.电子结构分析得到SAC原子与MXene基体的Ti原子在催化过程中存在一种协同作用.态密度及晶体轨道哈密顿量也显示出SAC原子与MXene基体Ti之间的一种轨道对称性匹配关系,揭示了这种协同作用对催化反应的积极作用.计算的氢析出反应(HER)结果也显示,在相同化学环境下,SAC@MXene体系氮还原反应相对于氢析出反应更易发生.     

Light‐Induced Chiral Iron Copper Selenide Nanoparticles Prevent β‐Amyloidopathy In Vivo

The accumulation and deposition of β‐amyloid (Aβ) plaques in the brain is considered a potential pathogenic mechanism underlying Alzheimer's disease (AD). Chiral l/d ‐Fe_xCu_ySe nanoparticles (NPs) were fabricated that interfer with the self‐assembly of Aβ42 monomers and trigger the Aβ42 fibrils in dense structures to become looser monomers under 808 nm near‐infrared (NIR) illumination. d ‐Fe_xCu_ySe NPs have a much higher affinity for Aβ42 fibrils than l ‐Fe_xCu_ySe NPs and chiral Cu_2?xSe NPs. The chiral Fe_xCu_ySe NPs also generate more reactive oxygen species (ROS) than chiral Cu_2?xSe NPs under NIR‐light irradiation. In living MN9D cells, d ‐NPs attenuate the adhesion of Aβ42 to membranes and neuron loss after NIR treatment within 10 min without the photothermal effect. In‐vivo experiments showed that d ‐Fe_xCu_ySe NPs provide an efficient protection against neuronal damage induced by the deposition of Aβ42 and alleviate symptoms in a mouse model of AD, leading to the recovery of cognitive competence.     

二甲双胍化学反应性的密度泛函理论研究及实验研究

二甲双胍(MET)是一个非常优良的降血糖药,一直是治疗II型糖尿病(T2DM)的首选药物,但其脂溶性较差,也存在引起胃肠道不适等副作用,对其结构修饰和衍生化,特别是将其研制成前药(Prodrug)具有一定的临床意义。为了探明二甲双胍化学反应的性能特点,本文基于密度泛函理论（DFT）开展了二甲双胍的化学内禀性质研究,包括各种可能互变异构体的单点能和量子化学反应性指数。此外,还对各异构体互变过程的过渡态以及它们的反应路径进行了研究。在此基础上,本文还对二甲双胍与亲电试剂的化学反应机理进行了初探,并用化学合成反应来验证,从而让我们能够从理论上弄清楚二甲双胍化学反应的特殊性质。     

水泥聚苯模壳格构式混凝土墙体的抗侧性能试验及分析

论文介绍6片不同高宽比的水泥聚苯模壳格构式混凝土墙体在轴压力和水平往复侧推力作用下的试验,分析这种墙体的抗侧强度、刚度和延性等力学性能.试验表明,高宽比大于1的墙体破坏时表现为墙体跟部的单一水平裂缝,其他部位完好;高宽比3∶4的墙体破坏时存在多条通过格构梁柱的斜向裂缝,墙体裂缝分布密集,变形能力好.     

离线预富集电感耦合等离子体质谱法测定天然水体中溶解态硅

以Mg(OH)2共沉淀和阳离子交换树脂作为离线预富集方法,建立了天然水体中溶解态硅电感耦合等离子体质谱(ICP-MS)测定方法。实验采用NaOH作为Mg(OH)2沉淀引发剂,以共沉淀方式将溶解态硅元素从天然水体中分离富集,再利用阳离子交换树脂将基体Mg2 清除,并对洗脱液流速、共沉淀碱度等条件进行优化选择。结果显示:Mg(OH)2共沉淀步骤可定量回收溶解态硅,控制溶液通过阳离子交换树脂的速率可将硅元素与基体Mg2 完全分离而不会造成损失。不同基体的水样的加标回收率为99%~105%,方法检出限为4.5μg/L(3S,n=8),方法精密度RSD小于3%。     

用于双光子激发荧光寿命显微成像的高重复频率皮秒扫描相机

建立了一台基于新研制的高重复频率皮秒扫描相机的双光子激发荧光寿命显微成像系统,重点介绍所研制的高重复频率皮秒扫描相机。为了在高时间分辨力的同时扩大时间测量范围,实现大面积两维空间高时间分辨取样测量,从而提高采样速率和更有效地发挥扫描相机的作用,设计和研制了一种大面积、高时间分辨力扫描变像管和一种重复频率高达1MHz的斜坡电压扫描电路。基于上述关键部件所研制的扫描相机具有重复频率高、扫描速度可调、时间分辨力高、工作面积大、非线性低、触发晃动小等优点。用钛宝石飞秒激光器作为激光脉冲源,通过脉冲提取器将76MHz的高重复频率降低为1MHz,采用可调延时器和标准具对扫描相机的时间分辨力、扫描速度和非线性进行标定。该系统的时间分辨力达到6.5ps,非线性为2.60%,可测量的时间范围从十几皮秒到几十纳秒。测量了若丹明6G和香豆素314两种标准荧光染料的荧光寿命,取得了与参考文献一致的实验结果。     

反应磁控溅射制备TiO2和Nb2O5混合光学薄膜

利用反应磁控溅射技术在BK-7基片上制备了二氧化钛和五氧化二铌均匀混合的光学薄膜.薄膜的内部微结构、表面形貌、化学成分比例以及光学性质等用X射线衍射、高分辨扫描电子显微镜、原子力显微镜、X射线光电子能谱和紫外可见近红外分光光度计进行研究;发现制备的薄膜为非晶结构,薄膜的表面平整、内部结构致密,不存在柱状结构或结晶颗粒的缺陷,TiO2与Nb2O5的成分比例大致是1∶1.54.从光学透射光谱计算的折射率和消光系数显示,在550 nm波长处的折射率为2.34,消光系数为2.0×10－4.结果表明制备的薄膜是TiO2和Nb2O5均匀混合的高质量光学薄膜.     

Measurement of thermal rise-time of a laser diode based on spectrally resolved waveforms

Thermal resistance and thermal rise-time are two basic parameters that affect most of the performances of a laser diode greatly. By measuring waveforms received after a spectroscope at wavelengths varied step-by-step, the spectrally resolved waveforms can be converted to calculate the thermal rise-time. Basic formulas for the spectrum variation of a laser diode and the measurement set-up by using a Boxcar are described in the paper. As an example, the thermal rise-time of a p-side up packaged short-pulse laser diode was measured by the method to be 390 μs. The method will be useful in characterizing diode lasers and LD modules in high-power applications.     

Fabrication and characterization of double-wall carbon nanotube absorber for passive mode-locked Nd:GdVO<Subscript>4</Subscript> laser

Using the vertical evaporation technique we fabricated saturable absorbers by transferring the double-wall carbon nanotubes (DWCNT) onto a hydrophilic quartz substrate. The fast recovery time and the saturation intensity of the absorber were measured to be 228 fs and 130 μJ/cm², respectively, at 1060 nm. The modulation depth of the absorber was about 3.7%. Passive mode-locked Nd:GdVO₄ laser was demonstrated. The continuous wave mode-locked pulses pulse duration is 5.6 ps and the largest average output power is 1.2 W at the pump power of 9.5 W. To the best of our knowledge, this is the first demonstration of high power continuous wave mode locking laser with DWCNT absorber.     

Effect of pyrolytic polyacrylonitrile on electrochemical performance of Si/graphite composite anode for lithium-ion batteries

The silicon/graphite (Si/G) composite was prepared using pyrolytic polyacrylonitrile (PAN) as carbon precursor, which is a nitrogen-doped carbon that provides efficient pathway for electron transfer. The combination of flake graphite and pyrolytic carbon layer accommodates the large volume expansion of Si during discharge-charge process. The Si/G composite was synthesized via cost-effective liquid solidification followed by carbonization process. The effect of PAN content on electrochemical performance of composites was investigated. The composite containing 40 wt% PAN exhibits a relatively better rate capability and cycle performance than others. It exhibits initial reversible specific capacity of 793.6 mAh g^?1 at a current density of 100 mA g^?1. High capacity of 661 mAh g^?1 can be reached after 50 cycles at current density of 500 mA g^?1.