Laser-induced site-selective silver seeding on polyimide for electroless copper plating

Ag particles were generated on Ag⁺-doped polyimide film by laser direct writing, followed by selective copper deposition using the metallic silver particles as seeds. Laser irradiation caused in situ reduction and agglomeration of silver on the polyimide film. The copper lines were less uniform and compact with higher scanning velocity and the width of the deposited copper line could reach 25 μm. Equations of the relationship between scanning velocity and connectivity of the deposited copper patterns have been derived. The process was characterised by AFM, XPS, SEM, and semiconductor characterisation system.     

关于微分熵的一类强偏差定理

利用关于乘积分布密度的相对熵和相对熵率的概念,建立了相依连续型随机变量序列关于参考微分熵的一类强偏差定理,证明中给出了将Laplace变换应用于微分熵强偏差定理的研究的一种途径．     

Magnetic and electrical transport properties of delta-doped amorphous Ge:Mn magnetic semiconductors

We report on the growth and characterization of delta-doped amorphous Ge:Mn diluted magnetic semiconductor thin films on GaAs (0 0 1) substrates. The fabricated samples exhibit different magnetic behaviors, depending on the Mn doping concentration. The Curie temperature was found to be dependent on both the Mn doping concentration and spacing between the doping layers. A sharp drop in magnetization and rise in resistivity are observed at low temperature in samples with high Mn doping concentrations, which is also accompanied by a negative thermal remanent magnetization (TRM) in the higher temperature range. The temperature at which the magnetization starts to drop and the negative TRM appears show a correlation with the Mn doping concentration. The experimental results are discussed based on the formation of ferromagnetic regions at high temperature and antiferromagnetic coupling between these regions at low temperature.     

BOUNDEDNESS AND CONVERGENCE FOR THE NON-LINARD TYPE DIFFERENTIAL EQUATION

In this article, the author studies the boundedness and convergence for the non-Lienard type differential equation (x|·)=a(y)-f(x) (y|·)=b(y)β(x)-g(x) e(t) where a(y),b(y),f(x),g(x),β(x) are real continuous functions in y∈R or x∈R,β(x)≥0 for all x and e(t) is a real continuous function on R = {t: t≥0} such that the equation has a unique solution for the initial value problem. The necessary and sufficient conditions are obtained and some of the results in the literatures are improved and extended.     

超子中子星性质的温度效应

从相对论平均场理论出发,考虑核子、超子和介子的相互作用,研究了温度对中子星组成粒子、状态方程和中子星质量等的影响.发现温度越高,超子在中子星内部出现时的重子数密度越低.当密度较高时,中子星的核心区主要由超子组成,即中子星转变成以奇异粒子为主要成分的超子星,并且这种转变受到温度的影响,温度越高,转变密度越低.由于超子的出现,中子星核心高密度区域的状态方程,对于不同温度,差别不大,所以有限温度中子星的最大质量都在1.8M_⊙附近.这与观测结果相符.     

改善液晶光阀投影光学系统偏振特性的理论设计方法

定量分析了液晶光阀投影光学系统中影响系统对比度的主要因素，利用矢量方法建立三维空间数学模型对光线进行追迹，并利用琼斯矩阵和矢量光学的原理分析了偏振器件--主要是波片--和各种光学薄膜对光学系统性能的影响。给出了在一定假设条件下的对没有波片的光学系统和插入波征后的光学系统的仿真计算结果。两组数据比较表明在光路中插入合适相位差的波片可以显著提高系统对比度等性能。     

中国股票市场波动特性的实证研究

本文以上证综指和深成分指数的日收益率为研究对象 ,应用 GARCH、TARCH模型理论 ,进一步分析了日收益率波动的条件异方差性、非对称性 ,同时比较了两个股票市场的不同波动特征     

Dispersion and distribution of organically modified montmorillonite in nylon‐66 matrix

Nylon‐66 nanocomposites were prepared by melt‐compounding nylon‐66 with an alkyl ammonium surfactant pretreated montmorillonite (MMT). The thermal stability of the organic MMT powders was measured by thermogravimetric analysis. The decomposition of the surfactant on the MMT occurred from 200 to 500 °C. The low onset decomposition temperature of the organic MMT is one shortcoming when it is used to prepare polymer nanocomposites at high melt‐compounding temperatures. To provide greater property enhancement and better thermal stability of the polymer/MMT nanocomposites, it is necessary to develop MMT modified with more thermally stable surfactants. The dispersion and spatial distribution of the organic MMT layers in the nylon‐66 matrix were characterized by X‐ray diffraction. The organic MMT layers were exfoliated but not randomly dispersed in the nylon‐66 matrix. A model was proposed to describe the spatial distribution of the organic MMT layers in an injection‐molded rectangular bar of nylon‐66/organic MMT nanocomposites. Most organic MMT layers were oriented in the injection‐molding direction. Layers near the four surfaces of the bar were parallel to their corresponding surfaces; whereas those in the bulk differed from the near‐surface layers and rotated themselves about the injection‐molding direction. The influence of the spatial distribution of the organic MMT on crystallization of nylon‐66 was also investigated. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1234–1243, 2003     

Propagation of elegant Laguerre–Gaussian beams through an annular apertured paraxial ABCD optical system

Based on the generalized Huygens–Fresnel diffraction integral and the expansion of the hard aperture function into a finite sum of complex Gaussian functions, the approximate analytical expression of elegant Laguerre–Gaussian beams passing through a paraxial ABCD optical system with an annular aperture is derived. Meanwhile, the corresponding closed-forms for the unapertured, circular apertured or circular black screen cases are also given. The obtained results provide more convenience for studying their propagation and transformation than the usual way by using diffraction integral formula directly. Some numerical examples are given to illustrate the propagation properties of elegant Laguerre–Gaussian beams.