HIGH-FREQUENCY VIBRATIONS OF CORRUGATED CYLINDRICAL PIEZOELECTRIC SHELLS

Coupled extensional and flexural cylindrical vibrations of a corrugated cylindrical piezoelectric shell consisting of multiple pieces of circular cylindrical surfaces smoothly connected along their generatrix are studied. To validate the results for the case of relatively thick shells or equivalently high-frequency modes with short wavelengths, existing analysis is extended by considering shear deformation and rotatory inertia. An analytical solution is obtained. Based on the solution, resonant frequencies and mode shapes are calculated.     

高压下制备的累托石/酚醛树脂复合材料微结构和热性能研究

 采用物理方法在高压下制备了酚醛树脂（PF）/累托石（REC）纳米复合材料,用X射线衍射（XRD）、透射电子显微镜（TEM）及热分析（DSC/TGA）等方法,研究了复合材料的物相、显微结构以及热学性能。结果表明,不通过层间高分子聚合反应,不预先对累托石进行有机化处理,在高压下,由聚合物分子插入粘土层间,可以形成剥离型树脂/粘土纳米复合材料,并且其热学性能发生了较大的改变。     

以L-组氨酸为模板仿生合成针状纳米碳酸钙

依据仿生合成原理, 以L-组氨酸为有机基质, 无水氯化钙和无水碳酸钠为原料, 通过简单的复分解反应制备出了平均直径约为80 nm, 长径比约为12∶1的针状纳米碳酸钙晶体. 利用高分辨扫描电子显微镜(FESEM)、X射线衍射仪(XRD)、傅里叶红外光谱议(FTIR)对产物进行了表征, 结果表明, 在不添加有机基质的溶液中得到立方状微米级的碳酸钙晶体, 添加L-组氨酸后得到针状纳米级的碳酸钙晶体, 并对L-组氨酸在仿生合成针状纳米碳酸钙过程中的作用机理进行了初步探讨.     

碳酸钙在天然木浆-聚酯纤维复合膜上的仿生合成

采用慢气体扩散法, 以十八烯酸为软模板, 在天然木浆-聚酯纤维复合膜(Jetspun Cloth^TM膜)上仿生矿化原位合成碳酸钙. 衰减全反射傅里叶变换红外光谱表征和扫描电镜结果表明, 溶液中的部分十八烯酸会富集到Jetspun Cloth^TM膜上, 同时, 由于十八烯酸的羧酸根对钙离子的结合作用, 钙离子也被富集到Jetspun Cloth^TM膜上. 碳酸钙在Jetspun Cloth^TM膜的纤维上生长, 并最终形成碳酸钙薄膜-高分子纤维膜复合结构.     

Acid-induced tunable white light emission based on triphenylamine derivatives

A series of triphenylamine (TPA) derivatives with various substituent groups were prepared and showed different absorption and fluorescence characteristics due to the substituent effect. On account of the existence of pyridine units, these TPA derivatives exhibited acid-induced tunable multicolor fluorescence emission including white light emission. In addition, acid-induced fluorescence regulation of these compounds has been also realized in the solid state, which enable them to be successfully constructed the stimuli-responsive fluorescent films and fluorescent inks for inkjet printing.     

Pillar[5]arene based conjugated macrocycle polymers with unique photocatalytic selectivity

The development of heterogeneous catalysts with substrate shape, size or electronic constitution selectivity is a huge challenge in photocatalysis. Reported herein is a host-guest interaction strategy to endow photocatalysts with special selectivity. By adjusting the precursors, conjugated macrocycle polymers (CMPs) with pillar[5]arene struts (CMP-1 and CMP-2) and a corresponding non-pillar[5]arene-contained conjugated organic polymer (COP-1) were prepared and the photocatalytic activities toward sulfide derivatives were investigated. The sulfides showed similar conversions when COP-1 was used as a photocatalyst, but exhibited significant differences when it turned to the CMPs. Remarkably, the conversion yield of S-1 achieved near 18 folds over the one of S-2 when CMP-2 was used as a catalyst. Mechanism studies confirmed that the “host-guest” effect of pillar[5]arene struts in CMPs was the main cause of the difference. The present work establishes CMPs as novel heterogeneous photocatalysts with substrate selectivity, and such a method will inspire the researchers concerning preparation of heterogeneous catalysts with excellent selectivity.     

Visible light-induced hydroxyalkylation of 2H-benzothiazoles with alcohols via selectfluor oxidation

A visible-light induced metal-free approach was described for the hydroxyalkylation of 2H-benzothiazoles with alcohols by using selectfluor as the oxidant. A variety of 2H-benzothiazoles and alcohols could be tolerated, providing a mild and simple method for the synthesis of C2-hydroxyalkylated 2H-benzothiazoles in moderate to good yields. Besides, ethers were also compatible in this reaction, leading to corresponding C2 ether-substituted 2H-benzothiazoles with high regioselectivity.     

Asymmetric double-layer composite electrolyte with enhanced ionic conductivity and interface stability for all-solid-state lithium metal batteries

All-solid-state Li metal battery has been regarded as a promising battery technology due to its high energy density based on the high capacity of lithium metal anode and high safety based on the all solid state electrolyte without inflammable solvent.However,challenges still exist mainly in the poor contact and unstable interface between electrolyte and electrodes.Herein,we demonstrate an asymmetric design of the composite polymer electrolyte with two different layers to overcome the interface issues at both the cathode and the anode side simultaneously.At the cathode side,the polypropylene carbonate layer has enough viscosity and flexibility to reduce the inter-facial resistance,while at the Li anode side,the polyethylene oxide layer modified with hexagonal boron nitride has high mechanical strength to suppress the Li dendrite growth.Owing to the synergetic effect between different components,the asprepared double layer composite polymer electrolyte demonstrates a large electrochemical window of5.17 V,a high ionic conductivity of 6.1×10~(-4) S/cm,and a transfe rence number of 0.56,featuring excellent ion transport kinetics and good chemical stability.All-solid-state Li metal battery assembled with LiFePO_4 cathode and Li anode delivers a high capacity of 150.9 mAh/g at 25℃ and 0.1 C-rate,showing great potential for practical applications.     

Insight into the combustion mechanism of nitroglycerin/nano-aluminum composite materials

Structural Chemistry - The ReaxFF-lg is used to simulate the thermal decomposition of the pure nitroglycerin (NG) and nitroglycerin/nano-Al (NG/Al) systems. The simulation results show that the...     

Heat transfer simulation in cavity of twin screw compressor under coupling of clearance leakage-heat by utilizing fuzzy beamlet finite element model

Journal of Thermal Analysis and Calorimetry - In order to optimize structure of twin screw compressor, and improve the working efficiency of twin screw refrigeration compressor, the heat transfer...