非线性两模玻色子系统的Majorana表象

利用Majorana表象,从平均场模型和二次量子化模型两方面研究了非线性双模玻色子系统的动力学问题.得到了Majorana点在球面上的运动方程,分析了平均场模型和二次量子化模型之间的区别及其在Majorana点运动方程中的体现.研究了二次量子化模型中量子态在少体和多体情况下的动力学演化及其与平均场量子态的区别和联系.以平均场模型和二次量子化模型量子态之间的保真度和Majorana点之间的关联为手段,讨论了在不同玻色子间相互作用强度、不同玻色子数下量子态的演化及相应的自囚禁效应.     

非晶物质中的临界现象

非晶态材料有着复杂的原子结构(短程有序、长程无序)和特殊的物理性质,其临界现象和相变问题一直受到学术界关注.非晶合金,又称为金属玻璃,是一种新型的非晶态材料,具有很高的强度和优异的弹性.从微观的角度来看,非晶合金可以看作是一个多粒子系统.临界现象的研究对认识和理解多粒子系统之间的相互作用有深刻的意义.本文主要讨论非晶合金中的临界现象,包括非晶合金从制备过程、微观结构到宏观的力学性能以及磁性方面存在的临界现象,并分析这些临界现象之间的内在联系,进而深入理解非晶合金的微观结构对其宏观性质的影响.这为认识非晶合金的形成本质,提高服役可靠性,探索具有实际应用价值的非晶合金提供理论依据.     

单晶金刚石氢终端场效应晶体管特性

基于微波等离子体化学气相淀积生长的单晶金刚石制作了栅长为2μm的耗尽型氢终端金刚石场效应晶体管,并对器件特性进行了分析.器件的饱和漏电流在栅压为-6 V时达到了96 mA/mm,但是在-6 V时栅泄漏电流过大.在-3.5 V的安全工作栅压下,饱和漏电流达到了77 mA/mm.在器件的饱和区,宽5.9 V的栅电压范围内,跨导随着栅电压的增加而近线性增大到30 mS/mm.通过对器件导通电阻和电容-电压特性的分析,氢终端单晶金刚石的二维空穴气浓度达到了1.99×10~(13)cm~(-2),并且迁移率和载流子浓度均随着栅压向正偏方向的移动而逐渐增大.分析认为,沟道中高密度的载流子、大的栅电容以及迁移率的逐渐增加是引起跨导在很大的栅压范围内近线性增加的原因.     

受污染混沌信号的协同滤波降噪

根据混沌吸引子的自相似分形特性,提出了一种利用协同滤波重构受污染混沌信号的降噪算法.所设计的降噪算法通过对相似片段的分组将一维混沌信号的降噪转化为一个二维联合滤波问题;然后,在二维变换域用阈值法衰减噪声;最后,通过反变换获得原始信号的估计.由于分组中的相似片段具有良好的相关性,与直接在一维变换域做阈值降噪相比,分组的二维变换能获得原信号更稀疏的表示,更好地抑制噪声.仿真结果表明,该算法对原始混沌信号的重构精度和信噪比的提升都优于小波阈值、局部曲线拟合等现有的混沌信号降噪方法,对相图的还原质量也更好.     

基于休眠机理的三维小基站蜂窝网络能效优化

小基站通常部署在写字楼、商贸区等城市密集区域以弥补传统宏基站在覆盖和传输方面的不足.小基站的分布一般是根据高峰时的网络负荷设计的,这必然导致网络负荷较低时的资源浪费.讨论了在平均接入率和信道容量双重约束下基于休眠机理的三维小基站蜂窝网络的能效优化问题.借助泊松点过程理论推导了三维小基站网络下行信道容量和平均接入率的数学表达式.通过分析下行信道容量和平均接入率的单调性得出同时满足传输信道容量和接入率要求的最佳休眠概率.分析了小基站最大用户连接数的最佳值,通过对该参数的合理配置,可以在满足通信指标的前提下最大程度地降低网络能耗.仿真结果表明,设计的基站休眠机理可以使小基站网络的能耗下降约21%.     

20Mgβ衰变谱学与15O(α,γ)19Ne反应(英文)

15O（α,γ）19Ne（p,γ）20Na反应链是高温CNO循环向快速质子俘获过程突破的一条关键路径,相关的反应率输入量可通过20Mg的β衰变可布居19Ne共振态并测量其衰变性质来获得。通过高效率高精度地测量20Mg β衰变中产生的质子与γ射线得到了20Mg衰变的详细信息,并构建了完整的衰变纲图,还进行了19Ne 4 033 keV共振态衰变性质的探索,获得了该态在20Mg β衰变中被布居的分支比上限。通过比20Mg和20O镜像能级跃迁的结果确认了同位旋非对称性,为检验相关理论模型提供了精确的实验数据。对于突破路径中有重要影响的19Ne 4 033 keV共振态的性质,有待更高统计的实验进一步研究。The breakout from the hot CNO cycle to the rapid proton capture process can occur via the 15O(α,γ)19Ne(p,γ)20Na reaction sequence, and the β decay of 20Mg can be used as an alternative method to characterize some specific resonances, which will provide detailed nuclear structure input for reaction rate calculations. The reliable information on the decay properties and structure of 20Mg was obtained by measuring the emitted particles and γ-rays in the β decay with high efficiency and high resolution. Attempt was also made to search for the decay channels associated with the 4 033 keV resonance in 19Ne. To test fundamental symmetries, the transitions in the mirror decays of 20Mg and 20O were compared. The precise experimental data presented here would be important to constrain the theoretical calculations. It is desirable to clarify the astrophysically relevant problem by further experiments with improved statistics on the basis of the present work.     

基于D-T紧凑型中子源的快中子照相准直屏蔽体设计及中子束特性模拟研究

中子照相是一种重要的无损检测技术,它能用于火工产品、毒品和核燃料元件等的检测。基于紧凑型D-T中子发生器,完成了一个用于快中子照相的准直屏蔽体系统（BSA）的物理设计。根据D-T中子源的能谱和角分布建立了中子源模型,采用MCNP4C蒙特卡罗程序,模拟了准直屏蔽体系统中中子和γ射线的输运,准直中子束相对于单位源中子的中子注量可以达到9.30×10-6 cm-2,准直中子束中主要是能量大于10 MeV的快中子;在设置的样品平面直径14 cm的照射视野范围,准直束中子注量的不均匀度为4.30%,准直束中中子注量与γ注量的比值为17.20,中子通量和中子注量比值J/Φ为0.992,说明准直中子束有好的平行性;准直屏蔽体外的泄露中子注量率与准直束中子注量率相比降低了2个量级。所设计的准直屏蔽体能满足快中子照相的要求。Neutron radiography is an important nondestructive testing technique. It can be used to detect the explosive devices, drug and the nuclear fuel element, etc. A beam-shaping-assembly (BSA) based on a compact D-T neutron generator is designed for fast neutron radiography in this paper. D-T neutron source model is constructed based on the neutron energy spectrum and angular distribution data. The transportation of neutron and γ-ray in the BSA is simulated using MCNP4C code. The neutron fluence of the collimated neutron beam with respect to the neutron source of the unit source is 9.30×10-6 cm-2. The collimated neutron beams is mainly fast neutrons with energies greater than 10 MeV. In the irradiation field range with a diameter of 14 cm, the neutron fluence uniformity of the collimated beam is 4.3%, the ratio of the neutron fluence to the gamma fluence in the collimated beam is 17.20, and the neutron flux and the neutron fluence ratio (J/Φ) is 0.992 which indicates that the collimated neutron beam has good parallelism. The leakage neutron fluence in outside of BSA is two orders of magnitude lower than that of the collimated neutron beam. The designed BSA can meet the need of fast neutron radiography.     

Note on Implementation of Three-Qubit SWAP Gate

In this paper, the synthesis and implementation of three-qubit SWAP gate is discussed. The three-qubit SWAP gate can be decomposed into product of 2 two-qubit SWAP gates, and it can be realized by 6 CNOT gates. Research illustrated that although the result is very simple, the current methods of matrix decomposition for multi-qubit gate can not get that. Then the implementation of three-qubit SWAP gate in the three spin system with Ising interaction is investigated and the sequence of control pulse and drift process to implement the gate is given. It needs 23 control pulses and 12 drift processes. Since the interaction can not be switched on and off at will, the realization of three-qubit SWAP gate in specific quantum system also can not simply come down to 2 two-qubit SWAP gates.     

Soldering of Bi-2223/Ag high temperature superconducting tapes with Sn–Pb–Bi–Ag alloy paste

Soldered joints of Bi-2223/Ag-sheathed high temperature superconducting multifilamentary tapes were fabricated using 63 wt.%Sn–34 wt.%Pb–1 wt.%Bi–2 wt.%Ag paste. The soldered joints were observed by scanning electron microscope (SEM) and X-ray diffraction (XRD). Moreover, the electrical properties of joints were evaluated by current–voltage curves, and the tensile strengths of the joints were also tested. The results show that the soldered joint consists of Ag sheath – Ag₃Sn compound layer – PbSn₂ and Ag₃Sn solder layer – Ag₃Sn compound layer – Ag sheath. The joints are obeyed with Ohms Law and the magnitude of the joint resistance, which deceases with the increase of the overlap length, can reach the order of 10^?8 Ω. The tensile strength of the joints with a brittle fracture mode is a little lower than that of the original tapes.     

地球深部探索与高压研究

地球内部是一个复杂的高温高压系统,地球核心的压力约360GPa,温度约5000℃,地球内部物质在高温高压条件下演化成为目前的地球层圈结构,在地球表面发生的许多重大的地质事件,都与高温高压条件下地球深部物质的性质密切相关,文章介绍了近年来高压物质科学的某些研究现状,并提出了若干地球科学中急待研究的科学问题。