Synthesis, morphology and random laser action of ZnO nanostructures

Three-dimensional (3-D) ZnO random-wall nanostructures and one-dimensional (1-D) ZnO nanorods were prepared on silicon substrates by a simple solid-vapour phase thermal sublimation technique. Optical pumped random lasing has been observed in the ZnO random-wall arrays with a threshold intensity of 0.38 MW/cm² in the emission wavelength from 380 to 395 nm. The optical gain was attributed to the closed-loop scattering and light amplification of the ZnO random-wall. The experimental result suggests that the morphology of nanostructure is the key factor to effect random lasing.     

求解非对称线性方程组的QMRGCGS方法

1 引言 求解非对称线性方程组Ax=b的双共轭梯度方法(BCG)[3]和它的变形共轭梯度平方方法(CGS)[6]都有典型的不规则收敛行为,后来Freund和Nachtigal提出一种BCG类方法,即拟极小剩余方法(QMR)[7],用来补救BCG方法的收敛性并且产生了光滑的收敛曲线。然而,象BCG方法一样,QMR方法要用到系数矩阵A及其转置A~T与向量的乘积,为了解决这一问题,Freund提出TFQMR方法,此方法具有拟极小剩余性,同时不需用到A~T与向量的乘积。     

微尺度效应对螺旋槽干气密封性能的影响

本文引用考虑微尺度效应的雷诺方程,推导出了考虑微尺度效应的螺旋槽干气密封内部流动的近似算法。应用本文提供的算法对文献中干气密封的不同实验工况进行了计算,与相应的实验数据对比,计算结果和实验结果基本符合;切向动量调节系数σv对计算结果在尺度越小时影响越大;考虑微尺度效应时开启力的计算结果更趋于实验数据。     

瑶药野葛花中6种无机元素的测定

用原子吸收光谱法测定野葛花原生药、野葛花汤剂中的 Ca、Mg、Cu、Zn、Fe、Mn等 6种无机元素含量。结果表明 ,原药和水煎液中 Ca、Mg含量比较丰富 ;各种元素的煎出率存在着较大的差异 ,其中 Cu、Zn、Fe的煎出率较高 ,Zn最高 ,达到了 82 .5 6 % ;Ca最低 ,为 5 .5 8%。并且将其结果与葛根的无机元素做了比较。为探讨无机元素与中药药效之间的关系提供了基础数据。     

火力发电厂废水中悬浮物处理的影响因素探讨

对火力发电厂废水中悬浮物处理的影响因素如pH值、水温、接触介质、进水水质、混凝剂加入量等进行分析，对主要影响因素水温和混凝剂加入量进行了试验分析，制定出废水悬浮物处理的合理方案。     

基于Schrdinger方程的耦合常数解析延拓方法

基于Schr¨odinger方程 ,利用耦合常数解析延拓方法研究了球对称的方势阱、Woods Saxon势和谐振子势中的单粒子共振态的能量与宽度 .分析了耦合常数的取值区间和Pad啨多项式阶数对计算结果的影响 .结果发现 ,在适当的耦合常数取值范围内 ,随着Pad啨多项式阶数的增加可以得到稳定和收敛的单粒子共振态能量与宽度 .     

Nonlinear rheological behavior of silica filled solution‐polymerized styrene butadiene rubber

The reinforcement and nonlinear viscoelastic behavior have been investigated for silica (SiO₂) filled solution‐polymerized styrene butadiene rubber (SSBR). Experimental results reveal that the nonlinear viscoelastic behavior of the filled rubber is similar to that of unfilled SSBR, which is inconsistent with the general concept that this characteristic comes from the breakdown and reformation of the filler network. It is interesting that the curves of either dynamic storage modulus (G′) or loss tangent (tan δ) versus strain amplitude (γ) for the filled rubber can be superposed, respectively, on those for the unfilled one, suggesting that the primary mechanism for the Payne effect is mainly involved in the nature of the entanglement network in rubbery matrix. It is believed there exists a cooperation between the breakdown and reformation of the filler network and the molecular disentanglement, resulting in enhancing the Payne effect and improving the mechanical hysteresis at high strain amplitudes. Moreover, the vertical and the horizontal shift factors for constructing the master curves could be well understood on the basis of the reinforcement factor f(φ) and the strain amplification factor A(φ), respectively. The surface modification of SiO₂ causes a decrease in f(φ), which is ascribed to weakeness of the filler–filler interaction and improvement of the filler dispersion. However, the surface nature of SiO₂ hardly affects A(φ). © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2594‐2602, 2007     

H m -modified wave operator for nonlinear Hartree equation in space of dimensionn≥2

We consider the scattering problem for the Hartree equation with potential |x|⁻¹ in a space of dimensionn≥2. We prove the existence ofH ^m -modified wave operator for Hartree equation on a dense set of a neighborhood of zero inH ^m (ℝ ⁿ ), meanwhile, we obtain also the global existence for the Cauchy problem of Hartree equation in a space of dimensionn≥2. This project is supported by the National Natural Science Foundation of China, 19601005     

Polymerization of cyclopentadiene initiated by methylaluminoxane

The polymerization of cyclopentadiene (CPD) was effectively initiated by methylaluminoxane (MAO) to generate poly(cyclopentadiene) (polyCPD). The effects on the polymerization of some reaction parameters such as the monomer concentration, the initiator concentration, and solvents were investigated. The conversion of CPD was monitored with gas chromatography to investigate the reaction kinetics. The polymerization rate was proportional to the concentrations of MAO in the first order and of the CPD monomer in the second order, and a reasonable cationic polymerization mechanism was suggested on the basis of the kinetic study. PolyCPD obtained at a low temperature could be dissolved in toluene or chloroform, and this indicated lower cross‐coupling during the polymerization reaction. ¹H NMR and IR analysis of the polymer indicated that there were almost equal amounts of 1,2‐enchainment and 1,4‐enchainment in the polymer chain. The measurement of polyCPD showed its unique properties as a potential candidate for stable wrappings or electronic packaging materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 264–272, 2006