Analysis of far-infrared laser magnetic resonance spectra of CH2Br at 447.3 and 671.1μm

A simple model has been developed to describe the Zeeman patterns of far-infrared laser magnetic resonance spectra of the monobromomethyl radical CH₂Br observed at 447.3 and 671.1μm. A satisfactory agreement between the experimental spectra of the radical and their simulation with this simple model has been achieved. This approach can be used to gain further information about the structure and the spectrum of this interesting radical.     

类铜离子的电子碰撞参数及其规律

用准相对论扭曲波方法系统地计算了Ｂａ、Ｎｄ、Ｇｄ、Ｙｂ、Ａｕ、Ｐｂ类铜离子组态能级之间的电子碰撞激发强度Ω（ｎｌ－ｎｌ），３≤ｎ≤７，４≤ｎ≤７，同时给出了高能极限的碰撞强度和外推到阈值的碰撞强度，用最小二乘样条方法拟合了全能域碰撞强度及热平均速率系数。对于一个激发过程，用１０个参数可以得到碰撞电子在任意能量下的碰撞强度以及任意温度下的速率系数。     

线状锗等离子体X射线线谱的时间分辨测量

用自行研制的X射线条纹晶体谱仪首次测量了线状锗等离子体的X射线时间分辨谱。给出了类Ne-锗L线共振线的时间演化过程,并用类Ne-锗L线共振线与其双电子俘获伴线的相对强度比粗估了锗等离子体的电子温度及其随时间的变化,实验给出了X光激光增益区介质的电子温度为400～760eV,同时给出了电子温度保持相对恒定的时间不小于90ps(电子温度变化小于2％)。     

Adhesion measurement of thin films by a modified laser spallation technique: theoretical analysis and experimental investigation

Laser driven shocks can lead to a dynamic failure, called film spallation. Here, we use a modified laser spallation set-up to measure the dynamic adhesion of thin films and we propose a novel diagnostic technology. Based on correlation theory, new spallation criteria for characterizing the progressive damage at the interface between the film and the substrate are established, such as interface delamination, film spallation and film expulsion. With the help of the theory, the degree of damage and the dimension of damage (i.e. fracture), such as the minimum width of delamination radius, the thickness of the film etc., are estimated. Experiments are carried out on epoxy/stainless steel and epoxy/Al, and the experimental results show that their dynamic bonding strengths are about 25 MPa and 20 MPa, respectively. The detailed results, analyses and discussions are presented in this paper. Received: 6 February 2001 / Accepted: 3 December 2001 / Published online: 11 February 2002     

ICP-AES测定饮用水源中的Cu、Mn、Pb、Cd、Zn

用ICP－AES法同时测定饮用水源中的Cu、Mn、Pb、Cd、Zn等重金属元素，具有基体效应小、测量范围宽等优点。检出限为0．2－4．0μg/L，回收率为91．5％－103．9％，相对标准偏差为0．29％－1．5％，测定密码样与实际样品，结果令人满意。     

Liquid phase oxidation of p-chlorotoluene to p-chlorobenzaldehyde over cobalt-doped mesoporous titania with a crystalline framework

Cobalt-doped mesoporous titania with a crystalline framework synthesized by surfactant templating method presented highly selective (99%) and reasonable conversion rate (49%) of catalytic oxidation of para-chlorotoluene to para-chlorobenzaldehyde in acetic acid using aqueous hydrogen peroxide as oxidant for the first time. Recycling of the catalyst indicates that the catalyst can be used a number of times without losing its activity to a greater extent. By contrast, cobalt-doped mesoporous titania without a crystalline structure and cobalt doped the commercial titania, Degussa P25 prepared by impregnation method with the similar concentration of cobalt were found inactive. The effects of catalyst concentration, reaction time, reaction temperature, and solvents on the performance of the catalyst were also investigated.     

In situ hybridization to chitosan/magnetite nanocomposite induced by the magnetic field

Chitosan/magnetite nanocomposite was synthesized induced by magnetic field via in situ hybridization in ambient condition. Results of XRD patterns and TEM micrographs indicated that magnetite particles with 10–20 nm were dispersed in chitosan homogeneously. An interesting result is that magnetite nanoparticles were assembled to form chain-like structures under the influence of the external magnetic field, which mimics the magnetite chains inside of magnetotatic bacteria. The saturated magnetization (Ms) of nano-magnetite in chitosan was 50.54 emu/g, which is as high as 54% of bulk magnetite. The remanence (Mr) and coercivity (Hc) were 4 emu/g and14.8 Oe, respectively, which indicated that magnetite nanoparticles were superparamagnetic. The key of route is that a pre-precipitated chitosan hydrogel membrane, used as chemical reactor, which controlled the precipitation of chitosan precipitation and in situ transformation of magnetite from the precursor simultaneously in the magnetic field environment.     

Molecular dynamics simulation of thermodynamic properties of NaCl at high pressures and temperatures

The expansivity, constant-pressure heat capacity, and isothermal bulk modulus of sodium chloride (NaCl) have been obtained by using molecular dynamics method. The calculated thermodynamic parameters are found to be in agreement with the available experimental data. At an extended temperature and pressure ranges, these parameters have also been predicted. The thermodynamic properties of NaCl are summarized in the pressure 0-500 kbar ranges and the temperature up to 1000 K.     

Vibration analysis of a beam with PCLD Patch

An analytical approach for vibration response analysis of a beam with single passive constrained layer damping (PCLD) patch is presented. The governing equation of motion of the beam is firstly derived on the basis of an energy approach and the Lagrange equation. The noval contribution is that a third admissible function is introduced to represent the longitudinal displacements of the constraining layer in the PCLD patch when the assumed-modes method is applied for discretizing the governing equation. In conventional analytical approaches, only two admissible functions are used together with a longitudinal static equilibrium equation of a section of base beam or constraining layer. Comparison of the computational results from the proposed analytical approach and the conventional analytical approach as well as a commercial FEM code reveals that the proposed analytical approach can describe the vibration responses of the damped beam more accurately for commonly used viscoelastic material (VEM) layer in the PCLD patch while the conventional analytical approach, in general, overestimates the damping effects of the PCLD patch. The advantages and disadvantages of the proposed analytical approach and conventional analytical approach are discussed through some case studies.     

Fe/Si多层膜的层间耦合与界面扩散

对以本征Si及重掺杂ｐ型和ｎ型Si作为中间层的Fe/Si多层膜的层间耦合进行研究，并通过退火，增大Fe，Si之间的扩散，分析界面扩散对层间耦合的影响. 实验结果表明，层状结构良好的制备态的多层膜，Fe，Si之间也存在一定程度的扩散，它是影响层间耦合的 主要因素，远远超过了半导体意义上的重掺杂，使不同种类的Si作为中间层的层间耦合基本 一致.进一步还发现，在一定范围内增大Fe，Si之间的扩散，即使多层膜的层状结构已经有了相当的退化，Fe/Si多层膜的反铁磁耦合强度基本保持不变. 关键词： Fe/Si多层膜 层间耦合 界面扩散