Studies on PNPP Hydrolysis Catalyzed by Divalent Metal Ion Macrocyclic Schiff Base Complexes in Micellar Solution

Two transitional metal ion macrocyclic Schiff base complexes, NiL and CuL were synthesized and characterized, and the metallomicelles made up of the nickel(II) and copper(II) complexes and surfactants(LSS, Brij35, CTAB), as mimic hydrolytic metalloenzyme, were used in catalytic hydrolysis of carboxylic ester (PNPP). The analysis of specific absorption spectrums of the hydrolytic reaction systems indicates that key intermediates, made up of PNPP and Ni(II) or Cu(II) complexes, have formed in the reaction processes of the PNPP catalytic hydrolysis. In this, based on the analytic result of specific absorption spectrum, the mechanism of PNPP catalytic hydrolysis has been proposed; a kinetic mathematical model, applied to the calculation of the kinetic parameter of PNPP catalytic hydrolysis has been established on the foundation of the mechanism proposed; the acid effect of reaction system, structure effect of the complexes, effect of temperature and effects of micelle on the rate of PNPP hydrolysis catalyzed by the complexes also have been discussed.     

Modification of Potassium Chabazites Derived from Fly Ash by Dosing Extra Cations: Promoted CO2 Adsorption Capacities and Fine‐Tuned Frameworks

Potassium chabazite (K‐CHA), a typical microporous zeolite with excellent CO₂ separating properties, was synthesized with waste fly ash and modified via cation dosing treatments using cesium and zinc cations, respectively. The resulting CHAs were analyzed by XRF, XRD, FT‐IR, SEM, and N₂ physisorption, whose CO₂ adsorption properties were then tested on the reorganized TGA apparatus. It showed from XRF data that cesium and zinc cations were successfully imported in the original K‐CHA by cation dosing, but the CHA microstructures and morphologies of K‐CHA were perfectly retained as confirmed by XRD, FT‐IR, SEM and N₂ physisorption. Since there were still over 9 potassium cations per unit cell in cation dosed Cs‐CHA and Zn‐CHA, they both maintained the favored properties of K‐CHA as “molecular trapdoors”. In the following adsorption experiments, the CO₂ uptakes of Cs‐CHA and Zn‐CHA at 333 K and 1 bar, compared with K‐CHA, elevated from 1.70 mmol · g^–1 to 2.34 and 2.03 mmol · g^–1, and the import of zinc cation also presented a positive effect on the adsorption kinetics. Detailed comparisons suggested modifications with cesium and zinc cations fine‐tune the CHA complying with different mechanisms, and CHAs modified via cation perform more approvingly than fully ion‐exchanged ones, providing us important insights into CHA modifications and applications in practice.     

Polyethylenimine‐Based Nanogels for Biomedical Applications

Nanogels (NGs) are 3‐dimensional (3D) networks composed of hydrophilic or amphiphilic polymer chains, allowing for effective and homogeneous encapsulation of drugs, genes, or imaging agents for biomedical applications. Polyethylenimine (PEI), possessing abundant positively charged amine groups, is an ideal platform for the development of NGs. A variety of effective PEI‐based NGs have been designed and much effort has been devoted to study the relationship between the structure and function of the NGs. In particular, PEI‐based NGs can be prepared either using PEI as the major NG component or using PEI as a crosslinker. This review reports the recent progresses in the design of PEI‐based NGs for gene and drug delivery and for bioimaging applications with a target focus to tackle the diagnosis and therapy of cancer.     

Highly ordered mesoporous Cr2O3 materials with enhanced performance for gas sensors and lithium ion batteries

Highly ordered mesoporous Cr(2)O(3) materials with high specific surface area and narrow pore size distribution were successfully prepared by a vacuum assisted impregnation method. Both 2-dimensional hexagonal and 3-dimensional cubic Cr(2)O(3) mesoporous replicas from SBA-15 and KIT-6 templates exhibit enhanced performance for gas sensors and lithium ion batteries, compared to the bulk Cr(2)O(3) counterpart.     

Pt/porous-IrO2 nanocomposite as promising electrocatalyst for unitized regenerative fuel cell

Pt/porous-IrO₂ composite as bifunctional oxygen electrocatalyst for unitized regenerative fuel cell has been prepared by chemical reduction of Pt on porous IrO₂ which is obtained via template-removal method. X-ray diffraction and transmission electron microscopy characterizations indicate that the Pt nanoparticles (ca. 4.4 nm) are deposited on both internal and external sites of porous IrO₂ nanoparticles. Electrochemical analyses show that the activity toward oxygen evolution reaction on Pt/porous-IrO₂ catalyst is 28% (at 1.55 V) higher than that on Pt/commercial-IrO₂ catalyst, and the activity towards oxygen reduction reaction on the former is 2.3 times (at 0.85 V) that on the latter. Oxygen reduction on Pt/porous-IrO₂ catalyst follows the first-order kinetics and the four-electron mechanism.     

基于离子交换和表面引发接枝聚合制备阴离子表面印迹材料及其识别特性研究

建立了一种新的离子表面印迹(IIP)方法. 使用偶联剂γ-氨丙基三甲氧基硅烷(AMPS)对微米级硅胶微粒进行表面改性, 制得表面含有氨基的改性硅胶AMPS-SiO₂. 凭借离子交换作用, 阳离子单体甲基丙烯酰氧乙基三甲基氯化铵(DMC)结合在模板离子磷酸根周围; 改性硅胶AMPS-SiO₂表面的氨基与溶液中的过硫酸盐构成氧化还原引发体系, 使DMC及交联剂N,N'-亚甲基双丙烯酰胺(MBA)在硅胶微粒表面发生接枝交联聚合, 从而实现了磷酸根离子的表面印迹, 制得了阴离子表面印迹材料IIP-PDMC/SiO₂. 采用静态与动态两种方法, 考察研究了IIP-PDMC/SiO₂对PO₄^3-离子的识别特性与结合性能. 研究结果表明, 离子表面印迹材料IIP-PDMC/SiO₂对PO₄^3-离子具有特异的识别选择性与优良的结合亲和性, 相对于对比离子高锰酸根离子, IIP-PDMC/SiO₂对PO₄^3-离子的识别选择性系数为9.58.     

双极谱峰指示催化动力学极语法测定痕量钒

在硫酸介质中,以酒石酸为活化剂,痕量机对溴酸钾氧化乙基极的反应具有极强的催化作用,研究了最佳反应条件,且发现在氨性缓冲溶液中乙基橙及其氧化产物具有良好的极谱峰,以极谱法监测催化反应过程中乙基橙及其氧化产物浓度的变化,建立了催化动力学极谱法测定痕量帆的新方法。方法的线性范围为０．２５～３．５μｇ／Ｌ,检出限为０．１２μｇ／Ｌ。应用于食品中痕量钒的测定,结果满意。     

Two new XP(O)[NHC(CH3)3]2 phosphoramidates,with X = (CH3)2N and [(CH3)3CNH]2P(O)(O)

In N,N′‐di‐tert‐butyl‐N′′,N′′‐dimethylphosphoric triamide, C₁₀H₂₆N₃OP, (I), and N,N′,N′′,N′′′‐tetra‐tert‐butoxybis(phosphonic diamide), C₁₆H₄₀N₄O₃P₂, (II), the extended structures are mediated by P(O)...(H—N)₂ interactions. The asymmetric unit of (I) consists of six independent molecules which aggregate through P(O)...(H—N)₂ hydrogen bonds, giving R₂¹(6) loops and forming two independent chains parallel to the a axis. Of the 12 independent tert‐butyl groups, five are disordered over two different positions with occupancies ranging from to . In the structure of (II), the asymmetric unit contains one molecule. P(O)...(H—N)₂ hydrogen bonds give S(6) and R₂²(8) rings, and the molecules form extended chains parallel to the c axis. The structures of (I) and (II), along with similar structures having (N)P(O)(NH)₂ and (NH)₂P(O)(O)P(O)(NH)₂ skeletons extracted from the Cambridge Structural Database, are used to compare hydrogen‐bond patterns in these families of phosphoramidates. The strengths of P(O)[...H—N]_x (x = 1, 2 or 3) hydrogen bonds are also analysed, using these compounds and previously reported structures with (N)₂P(O)(NH) and P(O)(NH)₃ fragments.     

Label‐Free,Non‐Derivatization CRET Detection Platform for 6‐Mercaptopurine Based on the Distance‐Dependent Optical Properties of Gold Nanoparticles

A label‐free, non‐derivatization chemiluminescence resonance energy transfer (CRET) detection platform has been developed for the detection of the non‐fluorescent small molecule 6‐mercaptopurine. This CRET process arose from a chemiluminescent (CL) donor–acceptor system in which the reaction of bis(2,4,6‐trichlorophenyl)oxalate (TCPO)–H₂O₂–fluorescein (maximum emission at 521.6 nm) served as the donor and gold nanoparticles (AuNPs, maximum absorption at 520.0 nm) served as the acceptor. This process caused a significant decrease in the CL signal of the TCPO–H₂O₂–fluorescein reaction. The presence of 6‐mercaptopurine induced an aggregation of AuNPs with the assistance of Cu²⁺ ions through cooperative metal–ligand interactions that was accompanied by a distinct change in color and optical properties. The maximum absorption band of the AuNPs was red‐shifted to 721.0 nm and no longer overlapped with the CL spectrum of the reaction; as a result, the CL signal was restored. This CRET system exhibited a wide linear range, from 9.0 nmol L^?1 to 18.0 μmol L^?1, and a low detection limit (0.62 nmol L^?1) for 6‐mercaptopurine. The applicability of the proposed CRET system was evaluated by analysis of 6‐mercaptopurine in spiked human plasma samples.     

Synthesis and Electrocatalytic Activity of 3Au?1Pd Alloy Nanoparticles/Graphene Composite for Bisphenol A Detection

In this study, a 3Au? 1Pd alloy nanoparticles/graphene composite (3Au? 1Pd alloy NPs/GN) with carboxyl groups and hydroxyl groups was prepared facilely by co‐reduction of graphene oxide (GO), HAuCl₄, K₂PdCl₄, with an Au? Pd alloy molar ratio of 3 : 1. The composite modified glass carbon electrode (GCE) showed a good performance for detecting bisphenol A (BPA) due to the enhanced electron transfer kinetics and large active surface area. The effective enrichment of BPA is attributed to the carboxyl groups and hydroxyl groups on the composite. According to the results of differential pulse voltammetry (DPV), the BPA oxidation current is linear to its concentration in the range of 10 nM–5.0 µM (R=0.998), and the detection limit is found to be 4.0 nM (S/N=3).