飞秒脉冲振幅和相位的无干涉条纹重构法测量

对作者所提出的无干涉条纹直接电场重构测量飞秒脉冲的振幅和相位的新方法作出进一步理论分析，并通过实验测量说明该方法的优越性.该方法克服了传统的SPIDER方法的弊病，能得到一组无干涉条纹的图像，排除传统方法必须使用傅里叶变换滤波消除干涉条纹而引进的系统误差，使得该方法能够采用较简便设备且能较准确测量飞秒脉冲强度轮廓和相位.最后给出同一条件下新方法和传统SPIDER方法分别重构的脉冲强度自相关曲线与实验测量结果的比较，以说明新方法的有效性和优越性.     

Removal of oxygen from silicon by electron beam melting

Small amounts of multicrystalline silicon were melted in an electron beam furnace in different experimental conditions in order to investigate the oxygen evaporation behavior during the electron beam melting (EBM) process. The oxygen content level before and after EBM was determined by secondary ion mass spectroscopy. The oxygen content was reduced from 6.177 to 1.629 ppmw when silicon was melted completely at 15 kW with removal efficiency up to 73.6 %. After that, it decreased continually to <0.0517 ppmw when the refining time exceeded 600 s with a removal efficiency of more than 99.08 %. During the melting process, the evaporation rate of silicon is 1.10 × 10^?5 kg/s. The loss of silicon could be reduced up to 1.7 % during oxygen removal process to a desirable figure, indicating EBM is an effective method to remove oxygen from silicon and decrease the loss of silicon.     

高温超导带材交流损耗的数值计算与分析

高温超导带材在许多领域得到越来越广泛的应用。交流损耗计算对于高温超导带材具有重要意义。该文介绍了两种交流损耗的数值计算模型,并以其中一种模型为例,对带材的交流损耗进行计算,与Norris公式计算结果作了比较,证明结果有效。最后提出了交流损耗数值计算中存在的问题。     

集成芯片LED场地照明灯新型叠片散热器热分析

针对大功率LED场地照明集成芯片散热问题,提出了一种新型散热器结构。该散热器利用高导热纯铝材料,采用叠片的方式成型。采用实验和有限元模拟相结合的研究方法,对包括直流电源的新型叠片式LED散热器的散热性能进行了研究。结果表明：LED电源达到稳态所需时间较长,最终能够稳定在一个较低的温度范围。叠片式纯铝散热器通过增加散热面积和提高散热器材料的导热系数能有效降低LED结温。所设计的散热器和选择的电源在自然对流条件下能够很好地满足250 W大功率LED散热要求。     

Searching for high-K isomers in the proton-rich A～80 mass region

Configuration-constrained potential-energy-surface calculations have been performed to investigate the K isomerism in the proton-rich A～ 80 mass region. An abundance of high-K states are predicted. These high-K states arise from two and four-quasi-particle excitations, with K~π= 8~+ and K~π= 16~+, respectively. Their excitation energies are comparatively low, making them good candidates for long-lived isomers. Since most nuclei under study are prolate spheroids in their ground states, the oblate shapes of the predicted high-K states may indicate a combination of K isomerism and shape isomerism.     

V形固体激光腔的动力学分析与改进

对通用的V形固体激光腔进行了全面的动力学分析，指出了它的优缺点，它的致命缺点是在动力学因子1ft≈1l1-f附近出现高损耗的运行区，激光器无法运行.为了克服这一缺点，在一种改进的V形腔基础上提出了一种更为紧凑的V形改进腔. 关键词： 固体激光腔 V形固体激光腔 改进的V形腔     

The sloshing of stratified liquid in a two-dimensional rectangular tank

The sloshing of inviscid liquid of stratified density in a rectangular tank is analyzed.As the flow is no longer irrotional,the governing equation is found to be quite different from the Laplace equation used for the liquid of constant density.In particular it contains terms of mixed temporal and spatial derivatives.The problem is solved based on the variable separation method and Laplace transform for the constant Vaisala-Brunt frequency.It is found that the stratification of density may have small effects...     

一种宽能谱多球中子谱仪能量响应的MC模拟

利用蒙特卡罗程序FLUKA模拟计算了聚乙烯慢化球和辅助材料慢化球对低能中子到高能中子的响应函数曲线。结果表明,对纯聚乙烯球来说,随着聚乙烯层厚度的增加,响应曲线峰逐步右移,峰值在高能区有所下降,对20 Me V以上的中子,无论纯聚乙烯球的尺寸有多大,其响应均下降到很低的程度;对辅助材料慢化球来说,中子能量小于1 Me V时,辅助材料慢化球与聚乙烯慢化球的响应曲线相似,但当中子能量大于20 Me V时,中子与辅助材料层发生(n,xn)反应,慢化球的响应呈显著上升趋势。分析计算结果,最终能够确定宽能谱多球中子谱仪的尺寸组合。     

宽截止窄带高反射滤光膜设计

窄带高反射滤光膜在光通讯、光学探测仪器等领域有着重要应用.探讨了"基片|H(LH)m1aL(HL)m2βCr,M|空气"膜系结构的窄带高反射滤光膜系,讨论了金属Cr层厚度,以及两种不同的匹配膜系对滤光膜特性的影响,计算了Cr层内部的电场分布.结果表明,较厚的金属层可实现更宽的截止带宽,匹配层的加入有效地实现了宽截止带的深截止,使中心波长处导纳为较大值的匹配膜系可以更好地实现滤光膜宽截止、窄带高反射特性;匹配膜层使中心波长处Cr层内部的电场强度趋于零,有效地降低了整个膜系的吸收,提高了反射率.     

Low-temperature preparation of anatase titania-coated magnetite

A composite photocatalyst with an anatase titania shell and a magnetite core was prepared in a novel way at low temperature (75 °C at most) by coating photoactive titanium dioxide onto a magnetic Fe₃O₄ core. The photocatalytic activity of the prepared photocatalyst was evaluated by the degradation of model contaminated water of phenol and compared to single-phase titania (either Degussa P25 or prepared titania without magnetic Fe₃O₄). The results showed that the photoactivity was slightly depressed. Then, a remarkable improvement in photoactivity was achieved by modifying the photocatalyst with a SiO₂ layer between the Fe₃O₄ core and TiO₂ shell. The repetitive using of the modified photocatalyst was also investigated, and experimental results illustrated that the photocatalytic-degraded ratio of phenol was still higher than 80% after six cycles.