基于ESIPT机理香豆素荧光化合物的合成和光学性质

以3-碘苯酚为原料,经过甲酰化反应、Knoevenagel缩合反应、Sonogashira偶联和还原反应得到以香豆素为母体的目标化合物7-（甲氧基苯乙炔基）香豆素-3-甲醇(5)。化合物5的结构经过¹H NMR, ¹³C NMR和MS(ESI)分析表征确认。并对化合物5的光学性质进行了研究,结果表明：化合物5具有典型的 ESIPT 发光机理,可以构建比率计量型双光子荧光探针。      

Geometric and Electronic Behavior of C60 on PTCDA Hydrogen Bonded Network

Self-assembled supramolecular networks are promising spacer layer for electronic decoupling from the metal substrate.However,the mechanism behind of how the intrinsic electronic structure of spacer layers affects the adsorbate is still unclear.Here a hydrogen bonded network composed of n-type semiconducting molecules 3,4,9,10-perylene-tetracarboxylic-dianhydride(PTCDA)is prepared under ultra-high vacuum to serve as a spacer layer for functional organics C60 on Au(111).The geometric and electronic information of C60 was investigated by scanning tunneling microscopy and scanning tunneling spectroscopy(STM/STS)at 5 K.Effective decoupling from the metal surface yields an energy gap of 3.67 eV for C602nd,merely considering the HOMO-LUMO peak separation.The broadening of resonance peaks in STS measurements however indicates unneglected interlayer interactions in this hetero-organic system.Moreover,we scrutinize the nucleation sites of C60 on PTCDA layer and attribute this to the decreased diffusion capability on a less dense molecular arrangement possessing inhomogeneous spatial distribution of unoccupied molecular orbitals.     

Covalent Triazine Framework Nanosheets for Efficient Energy Storage and Conversion

Two-dimensional crystalline covalent triazine frameworks(CTFs) have received much attention because of their unique triazine structure, which endows CTFs with high thermal and chemical stability, high proportion of nitrogen and permanent porosity. Based on this unique structure characteristic, CTFs have shown great potential in energy storage and conversion due to the intrinsically strong conjugated structure, delocalized electron and rich active sites. However, charge carrier(electron, hole or ion) transport can't reach the deep active sites and charge diffusion was impeded by defects in bulk CTFs. Hence, to break through this barrier, increasing attention has been paid to get few layered CTFs or CTFs nanosheets in order to shorten the pathways of charge diffusion and expose more active sites. This review summarizes the synthetic methodologies of CTFs nanosheets and the potential application in photocatalytic and electrochemical energy storage and conversion.     

In situ Carbon Modification of g-C3N4 from Urea co-Crystal with Enhanced Photocatalytic Activity Towards Degradation of Organic Dyes Under Visible Light

An in situ strategy was introduced for synthesizing carbon modified graphitic carbon nitride(g-C₃N₄) by using urea/4-aminobenzoic acid(PABA) co-crystal(PABA@Urea) as precursor materials. Via co-calcination of the PABA co-former and the urea in PABA@Urea co-crystals, C guest species were generated and compounded into g-C₃N₄ matrix in situ by replacing the lattice N of the carbon nitride and forming carbon dots onto its layer surface. The carbon modification dramatically enhanced visible-light harvesting and charge carrier separation. Therefore, visible light photo-catalytic oxidation of methylene blue(MB) pollution in water over the carbon modified g-C₃N₄(C/g-C₃N₄) was notably improved. Up to 99% of methylene blue(MB) was eliminated within 60 min by the optimal sample prepared from the PABA@Urea co-crystal with a PABA content of 0.1%(mass ratio), faster than the degradation rate over bare g-C₃N₄. The present study demonstrates a new way to boost up the photocatalysis performance of g-C₃N₄, which holds great potential concerning the degradation of organic dyes from water.     

Colorful Silver/Carbon Nitride Composites Obtained by Photoreduction

The Ag⁺ photoreduction by graphitic carbon nitride(g-CN) materials in a high concentration of Ag⁺ solution is reported, and a series of colorful Ag/g-CN composites is prepared and characterized. The chromatic change correlates to the carbon nitride materials synthesized at different heating temperatures(CN_T, where T means heating temperature), taking advantage of the different photocatalytic activities of different CN_T. The mechanism beneath this phenomenon is attributed to two factors:the particle size of Ag NPs and the coordinate effect of Ag NPs on CN_T sheets. Interestingly, the multi-colors of Ag/g-CN composites display only on the CN_T materials synthesized from heating melamine-cyanuric acid precursor, but not on the CN_T from heating pure melamine. The color of the as-prepared Ag/g-CN composites can endure the corrosion of HNO₃ and ethanol, which shows a good chemical stability and may hint its application as chromophores.     

pH计检定仪期间核查方法

介绍pH计检定仪的4种期间核查方法:传递比较法、多台对比法、留样测量法、实验室间比对法。传递比较法能直接反应pH计检定仪的变化,适用于已建立pH计检定仪检定装置的单位;多台对比法与留样测量法方便、快捷,可操作性强,适合大多数单位进行pH计检定仪的期间核查;实验室间比对法对设备要求较低,但需要协调的单位较多,周期较长,费用较高,实用性差。     

高氯废水化学需氧量分析方法综述

对高氯废水化学需氧量分析方法进行归纳和综述。常用的高氯废水化学需氧量分析方法有氯气校正容量法、降氯密闭消解分光光度法以及高温氧化总有机碳系数换算法等。其中氯气校正容量法操控要求较高,分析耗时较长,不适用于大批量样品同步分析;降氯密闭消解分光光度法灵敏度高,但在降氯过程中增加了重金属盐硫酸汞的用量,分析成本较高,易产生二次污染,且对样品的均质性要求较高;高温氧化总有机碳系数换算法操作便捷、抗干扰能力强,但是换算系数易随不同来源、不同组分的样品发生波动,数据可比性需要通过实验验证。经过梳理归纳,明确各种分析方法的特点和适用范围,为研究人员选择合适的分析方法或进一步开展相关的方法研究提供参考。     

饲料中重金属检测技术的研究进展

综述了饲料中重金属的检测方法如光谱分析法(包括原子吸收光谱法、原子荧光光谱法、电感耦合等离子体发射光谱法、X-射线荧光光谱法和激光诱导击穿光谱法)、电感耦合等离子体质谱法、电化学分析法和分光光度法的研究进展,对各类检测方法的优缺点进行了对比与分析,并在此基础上对饲料中重金属检测技术的发展趋势进行了展望。     

地锦草有效成分的提取及其生物活性的研究

采用乙醇浸提法来提取地锦草中的有效成分,并对其生物活性进行研究。探讨了地锦草总黄酮的最佳提取工艺;通过体外抗氧化实验,对地锦草提取物的抗氧化活性进行研究;同时考察了提取物对大肠杆菌、枯草芽孢杆菌、青霉、曲霉的抗菌性能,并对地锦草提取物对α-淀粉酶的抑制活性进行研究。实验结果表明:地锦草总黄酮最佳提取工艺为乙醇体积分数为85%,料液比为1∶15,提取次数为3次;体外抗氧化实验表明,地锦草具有抗氧化活性,且在浓度为8 mg/mL最为明显;抗菌性能实验表明,地锦草具有抗菌性能,且对青霉、曲霉的抗菌效果比较显著;α-淀粉酶的抑制活性的实验表明,地锦草提取物对α-淀粉酶的活性有抑制能力,在pH 6.8、浓度为4.8 mg/mL、温度为70℃时,其对α-淀粉酶的抑制效果达到最大。     

One-pot synthesis of VO x /Al 2 O 3 as efficient catalysts for propane dehydrogenation

Vanadium oxides, as highly efficiently catalysts, are widely applied in various catalytic reactions, such as the dehydrogenation of light alkanes and epoxidation of alkenes. In this paper, a series of VO _x /Al ₂ O ₃ catalysts were fabricated by the 1-pot method for catalytic propane dehydrogenation. The results indicated that the VO _x /Al ₂ O ₃ catalysts with loading of 10 wt.% vanadium exhibited optimized catalytic performance. The as-prepared catalysts were characterized by N ₂ adsorption-desorption, XRD, TEM, H ₂ -TPR, and XPS to explore the texture properties, morphology, and electronic environment of vanadium. In addition, several vanadium catalysts were also prepared by the incipient wetness impregnation (IWI) method to compare their catalytic performance with the 1-pot synthesized catalysts. The catalysts synthesized by the 1-pot method exhibited higher selectivity of propylene and longer catalyst lifetime at high propane conversion when compared to the counterpart synthesized by the IWI method.