羧甲基纤维素系列高分子表面活性剂超声合成的研究

研究了在超声波作用下羧甲基纤维素的降解反应及ＣＭＣ与具有不同亲水亲油比值的活性大单体「烷基醇（酚）聚氧乙烯醚丙烯酸酯及第三单体」的超声共聚反应。经萃取提纯的共聚产物用ＩＲ，＾１３Ｃ ＮＭＲ和ＵＶ等方法进行表证，证实通过超声反应制得了二元和三元共聚物。     

GAS TRANSPORT PROPERTIES OF A POLYIMIDE BASED ON 2, 2-BIS (3, 4-DECARBOXYPHENYL) HEXAFLUOROPROPANE AND meta-PHENYLENEDIAMINE

By means of a vacuum time-lag method, gas transport properties of apolyimide based on 2, 2- bis (3, 4- decarboxyphenyl ) hexafluoropropane dianhydride (6FDA )and meta- phenylenediamine (mPDA ) have been measured as a function of upstream pres-sure and temperature. The results show that no gas-induced plasticization occurs for thispolyimide in the upstream pressure range from 1 atm to 20atm. The temperature depen-dence of P and D can be described by the Arrhenius equations. The activation energiesof permeation and diffusion were obtained for the gas/polymer pair studied and correlatedwith the size of penetrant gas.     

辐照对聚己内酯结构和性能的影响

研究了γ 辐照对不同分子量的聚己内酯 (PCL)的力学性能、热性能、结晶行为的影响 ,在此基础上 ,研究了辐射交联后的PCL的形状记忆行为 .研究结果表明 ,PCL的分子量越大 ,辐射交联所需的凝胶化剂量越低 .溶胶分数S +S1 2 与 1 D的关系很好地符合Charlesby Pinner关系式 ,说明PCL的辐射交联属于无规交联 .剂量对PCL的力学性能影响显著 ,剂量越大 ,抗张强度和断裂伸长率下降越多 ,但分子量较高的PCL的抗张强度受剂量的影响较小 .DMA分析表明 ,聚己内酯辐照交联后的弹性模量和耐热性能显著提高 .交联度较高的PCL表现出高弹态 ,可以拉伸 ,并具有较好的形状记忆行为 .DSC分析表明 ,辐射交联使PCL的结晶度有所增加 ,但也使结晶熔点有所降低     

聚甲基丙烯酸4［（4＇－硝基－1＇硫酰基苯）－1－羟烷氧基本基］酯的合成

new series of sulfur-contalning side chain liquid crystalline polymers were described. Mesomorphic side chains with methylene spacer in different length have been synthesized and their structures were identified by NMR, IR and MS.The liquid crystalline nature of the polymers was characterlzed by microscopy.The Polymers have liquid crystalline nature.     

高效液相色谱手性流动相添加剂法拆分酪氨酸甲酯对映体

分别将β-环糊精、羟丙基-β-环糊精作为手性流动相添加剂，研究了酪氨酸甲酯对映体在反相HPLC系统中的拆分，考察了流动相种类、pH和手性流动相添加剂浓度对手性拆分的影响，建立了β-环糊精手性流动相添加剂法拆分酪氨酸甲酯对映体的方法。     

气相[（SiO2）nX]^—团簇产生机理

利用ＸｅＣｌ准分子激光烧蚀多种硅氧多孔结构材料，在负离子通道测得丰富的「（ＳｉＯ２）ｎＸ」＾－负离子团簇，并讨论了多孔网结构和表面活性基团的分布对激光能量的吸收，传输及团簇产生的重要作用。     

丙酮一步法合成甲基异丁基酮催化剂研究

用浸渍法制备了丙酮一步法合成甲基异丁基酮负载型催化剂，考察了载体的预处理温度、添加镧助剂对催化剂性能的影响；用BET法测定了催化剂的表面积；采用H2-O2滴定法测定Pd的分散度．结果发现，用经过1．023K焙烧过的Al2O3为载体的催化剂具有较好的催化性能，添加镧助剂后催化剂的分散度、活性有较大的提高．     

生物质裂解产物的制备及HPLC检测其成分的虚拟仿真实验开发

In order to improve university laboratory teaching and practical education under the background of information technology, as well as overcome the difficulty for practical training, develop a virtual simulation experiment platform for rapid pyrolysis of natal materials and high-performance liquid chromatographic (HPLC) detection of its components. The experiment integrates the actual operation process of the plant to produce cleaved products by rapid pyrolysis of biomass with HPLC detection. The virtual experiment is divided into biomass sample pretreatment, rapid biomass pyrolysis, bio-oil extraction, and HPLC determination of complex components, making the biomass cleavage workshop "real" through simulation. This virtual simulation experiment fully integrates the utilization of biomass resources and basic chemistry courses (such as organic chemistry, instrumental analysis, chemical engineering principles, etc.), which are widely involved in agricultural and forestry majors with advantageous characteristics value.     

V_2O_5/C催化氧化乙二醛制备乙醛酸

利用等体积浸渍法制备了V2O5/C催化剂,并应用于乙二醛的液相氧化反应,采用XRD、TEM手段对催化剂进行了物化性质表征.结果表明,V2O5/C对乙二醛的氧化表现出较高的催化活性和乙醛酸选择性,反应10h,乙二醛的转化率达29.2%,乙醛酸得率13.6%.与贵金属Pd-Bi/C催化剂相比,V2O5/C催化剂的稳定性和重复使用效果都比较好.     

富勒烯掺杂有机光电导材料的光电导性

富勒烯掺杂有机光电导材料的光电导性徐铸德，陈万喜，冷拥军，许小平，李文铸（浙江大学化学系，物理系，杭州，３１００２７）汪茫（浙江大学高分子科学与工程学系）关键词富勒烯，光化学，光物理，光电导体光电导材料在现代静电成像领域中有极广泛的应用，近年来，有机...