TiO_2/PVDF复合中空纤维膜的制备和表征

采用相转化法制备了二氧化钛 (TiO2 ) 聚偏氟乙烯 (PVDF)复合中空纤维膜 .应用牛血清白蛋白截留实验、扫描电子显微镜、热重分析、X射线衍射分别对复合膜的分离性能、微观结构、热稳定性和晶相组成进行了分析 .结果表明复合膜的性能与纯PVDF膜的相比有显著的改善 ,其中对牛血清白蛋白的截留率从 3 2 7%提高到 86 6 7% ,单根纤维的断裂应力从 3 35MPa提高到 4 70MPa ,提高了 4 0 3% .氮气吸附实验测定的孔径分布进一步表明复合膜的孔径分布变窄 ,孔径变小 .     

2-羟基-萘甲醛缩对甲氧基苯甲酰腙的合成与荧光性质研究

合成了2-羟基-萘甲醛缩对甲氧基苯甲酰腙,采用元素分析和红外光谱对该化合物结构进行了表征。详细研究了该化合物在固态、不同溶剂中和有锌离子存在下的荧光光谱,探讨了溶剂极性和锌离子的存在对其荧光光谱的影响。结果表明：该化合物的固体和溶液都有很强的荧光,溶剂对其荧光性质有较大的影响,其DMF溶液在485nm处发光最强。金属锌离子具有荧光增敏性。     

大豆中二硝基苯胺类除草剂多残留的气相色谱法定量检测及质谱确证

建立以凝胶渗透色谱法（GPC）和固相萃取法（SPE）及气相色谱法（GC）联用技术测定大豆中10种二硝基苯胺类除草剂（氟乐灵、乙氟灵、环丙氟、氯乙氟灵、仲丁灵、异乐灵、二甲戊乐灵、二硝胺、氨基丙氟灵和磺乐灵）多残留检测方法。目标农药经正己烷饱和的乙腈提取，凝胶渗透色谱除去大豆中大部分油脂及色素，再经Florisil柱净化和富集，依次用6mL二氯甲烷和6mL二氯甲烷＋丙酮（99＋1）洗脱。目标农药采用电子捕获检测（GC／ECD），外标法定量，并经质谱（MS）确证。两个添加水平重复6次，回收率分别为74％～105％和59％～105％；相对标准偏差〈20％；检出限为1．8～7．6μg／kg；定量限为6～38μg/kg。     

离子交换-原子捕集-火焰原子吸收光谱法测定水中的超痕量镍

在文中所述条件下,镍的原子捕集灵敏度较常规法高320倍,即在离子交换法浓缩仅40倍的情况下,可使镍的测定灵敏度提高12800倍,从而成功实现了ppt级超痕量镍的测定。     

［Mo_3（μ_3－O）（μ－Cl）_3（μ－O_2CR）_3Cl_3］~－系列三核钼的电化学及热化学性质的研究

用循环伏安法研究了［Ｍｏ_３ＯＣｌ_６（Ｏ_２ＣＲ）_３］－（其中Ｒ＝ＣＨ_３，Ｈ，ＣＨ_２Ｃｌ）系列三核钼簇合物在ＣＨ_３ＣＮ和ＤＭＦ溶剂中的电化学行为，并用差热－热重手段研究了它们的热稳定性和热分解过程的可能机理。结果表明在不同溶剂中它们有相似的二对氧化还原峰，而且在同一溶剂中随着Ｒ基团吸电子能力的增强，相应的第一氧化还原电位值向正向移动。当Ｒ＝ＣＨ_３，Ｈ时，它们的起始分解温度分别为２６５℃和２１０℃，即同样随着Ｒ基团吸电子能力的增强，起始分解温度降低。     

BaPbO_3－Nd_2O_3系陶瓷导电性研究

研究了ＢａＰｂＯ３－Ｎｄ２Ｏ３系陶瓷的导电性，研究表明，此系统陶瓷的导电载流子是氧缺位中存在的施主电子；添加适量的Ｎｄ２Ｏ３，可以改善ＢａＰｂＯ３陶瓷的导电性和ＰＴＣ特性     

新工科项目“地方(行业)高校化学类专业应对产业变化的升级改造研究与实践”的实施

This "emerging engineering education (3E)" project "Upgrade and Practice of Chemistry-related Majors of Local and/or Specialized University Responding to the Industry Changes" was supported by the Ministry of Education. To aim at the issue of how to upgrade the chemistry-related majors of a local and/or specialized university responding to industry changes, an investigation on local regional economy and industry changes was carried out, the capability requirements of 3E for talents were analyzed, and the training objectives, graduation requirements as well as the new teaching models were also studied for the major to meet the future requirements. The practical experience for 3E construction of chemistry-related majors by selected universities was suggested.     

4-苯乙炔基苯胺封端聚酰亚胺树脂的合成与性能研究

使用4-苯乙炔基苯胺(4-PEA)作为反应性封端剂,和3,3′,4,4′-二苯醚四酸二酐(ODPA),3,3′,4,4′-联苯四酸二酐(BPDA),1,4-双(4′-氨基-2′-三氟甲基苯氧基)苯(BTPB)和3,4′-二氨基二苯醚(3,4-′ODA)反应合成了系列4-苯乙炔基苯基封端的聚酰亚胺低聚物,对低聚物的化学结构、热性能和熔体粘度以及固化后树脂的热性能等进行了研究.实验结果表明,低聚物均具有一定的结晶性,含有ODPA的聚酰亚胺低聚物较之含有BPDA的低聚物具有更低的熔体粘度,且出现最低熔体粘度的温度更低;固化后的树脂表现出良好的热性能,含有BPDA的树脂具有更高的玻璃化转变温度;系列低聚物中二胺单体的比例对于低聚物的熔体粘度和固化后树脂的热稳定性有一定影响.     

胶束电动毛细管色谱-电喷雾质谱联用法同时测定妇宁栓中的5种有效成分

应用胶束电动毛细管色谱-电喷雾电离质谱联用法同时测定了妇宁栓中的小檗碱、巴马汀、苦参碱、儿茶素和黄芩苷5种主要有效成分的含量。在未涂层石英毛细管柱(80 cm×50 μm)中,以40 mmol/L月桂酸-100 mmol/L氨水溶液(含25%的乙腈,pH 9.5)为缓冲液,分离电压为25.0 kV,各组分在16 min内得到完全分离。电喷雾质谱检测时采用50%异丙醇水溶液(含3 mmol/L乙酸)为鞘液。结果表明,小檗碱、巴马汀、苦参碱、儿茶素、黄芩苷的线性范围分别为0.03～15、0.05～15、0.2～250、1.5～300和2.0～500 mg/L,检出限分别为0.01、0.02、0.05、0.5、0.6 mg/L。5种组分的加标回收率为94.0%～104.0%,相对标准偏差(RSD)在0.3%～3.2%之间。该法简便、快速、准确,重现性好,可用于妇宁栓中小檗碱、巴马汀、苦参碱、儿茶素、黄芩苷含量的同时测定。     

Molecularly imprinted polymers on the surface of silica microspheres via sol‐gel method for the selective extraction of streptomycin in aqueous samples

Streptomycin‐imprinted silica microspheres were prepared by combining a surface molecular‐imprinting technique with the sol‐gel method. A mixture of tetrahydrofuran, ethanol, and water (6:1:1, v/v/v) was selected as dispersing solvent while 3‐aminopropyltriethoxysilane and triethoxyphenylsilane acted as functional monomers, and tetraethyl orthosilicate as a cross‐linker. Characterization of the molecularly imprinted polymers was conducted using scanning electron microscope and dynamic binding experiments. As compared to the nonimprinted polymers, the imprinted polymers exhibited a higher degree of saturated adsorption volume up to 26.3 mg/g, and better selectivity even in an aqueous solution with interfering compounds, including dihydrostreptomycin, neomycin, and tetracycline. The adsorption ability and selectivity were observed to be influenced by the mole ratio of 3‐aminopropyltriethoxysilane and triethoxyphenylsilane. Feasibility of the polymers to be used for actual application was also evaluated with spiked samples, indicating great potential for large‐scale applications. Moreover, the streptomycin‐imprinted polymers can be repeatedly used for 12 cycles without losing original performance, which is beneficial for commercial use.