一个含有和、积、幂结构的新不等式

本利用一个凸函数的凸性，并结合Jensen加权不等式，导出一个含和、积、幂结构的新不等式，它包含了一些名不等式。     

CRYSTAL STRUCTURE AND MORPHOLOGY OF NASCENT SAMPLES OF SYMMETRIC AROMATIC POLYESTERS——Ⅱ. POLY(p-PHENYLENE 2,6-NAPHTHALATE)

Confined thin film melt polymerization (CTFMP) of naphthalene chloride/hydroquinone (NCMQ, 1/1, molar)mixtures at polymerization temperatures (T_p) below ca. 300℃ resulted in relatively thick, elongated crystals. Polymerizationof NC/HQ above 300℃ between glass yielded well-formed lamellar crystals ca. 100 A thick. Phase Ⅰ and Ⅱ [001] EDpatterns were obtained for all T_p, the relative amount of phase Ⅰ increasing with T_p. Polymerization of naphthalenedicarboxylic acid/hydroquinione diacetate 1/1 mixtures at high T_p also yielded lamellar crystals that "curled up" off of thesubstrate. When the high temperature CTFMP polymerization was conducted between mica, aggregates of lamellae on-edgedeveloped but epitaxial growth did not occur. Epitaxial growth of lamellae between mica could be obtained, however, byconfined thin film solution polymerization, with both of the latter samples yielding apparently related ED patterns from adifferent unit cell than phase Ⅰ or Ⅱ. Fiber patterns, obtained from sheared samples, indicated considerably greater crystaldisorder than in the nascent crystals. Refinement of the phase Ⅰ unit cell parameters, based on the [001] and [01 1] EDpatterns, with modeling based on Cerius~2, suggests a monoclinic phase Ⅰ unit cell with a = 7.76, b = 5.71, c = 14.99 A, α = γ= 90°, β= 99.7°, ρ = 1.47 g/cm~3, space group P12_1/al.     

Difference in micellar properties of sodium dodecyl sulfonate from sodium 4-decyl naphthalene sulfonate in D2O solution studied by 1H NMR relaxation and 2D NOESY

¹H chemical shift changes of sodium 4-decyl naphthalene sulfonate (SDNS) at 313 K show that its critical micellar concentration lies between 0.82 and 0.92 mmol/dm³, which is in the same range as that of the previous study at 298 K. The spin–lattice relaxation time, spin–spin relaxation time and two-dimensional nuclear Overhauser enhancement spectroscopy experiments give information about the structure of the SDNS micelle and the dynamics of the molecules in the micelle. The size of the SDNS micelle remains almost unchanged in the temperature range from 298 to 313 K as deduced by analyzing the self-diffusion coefficient. Special arrangement of the naphthyl rings of SDNS in the micelles affects the packing of these hydrophobic chains. The methylene groups of the alkyl chain nearest the naphthalene groups penetrate into the aromatic region, which results in a more tightly packed hydrophobic micellar core than that of sodium dodecyl sulfonate.     

Speciation analysis of arsenic in traditional Chinese medicines by hydride generation-atomic fluorescence spectrometry.

A method has been described for the determination of arsenic species (arsenite and arsenate) by hydride generation-atomic fluorescence spectrometry (HG-AFS). The experimental conditions that influence the fluorescence intensity and the reduction of arsenic were investigated and optimized, and the influences from foreign ions and their elimination were studied. The detection limit was found to be 79.7 ng L(-1). The proposed method was applied to the determination of arsenic species in water leachate of traditional Chinese medicines with a recovery range of 91.1-109.5%.     

Synthesis of graft copolymers with “V‐shaped” and “Y‐shaped” side chains via controlled radical and anionic polymerizations

A combination of nitroxide‐mediated radical polymerization and living anionic polymerization was used to synthesize a series of well‐defined graft (co)polymers with “V‐shaped” and “Y‐shaped” branches. The polymer main chain is a copolymer of styrene and p‐chloromethylstyrene (PS‐co‐PCMS) prepared via nitroxide‐mediated radical polymerization. The V‐shaped branches were prepared through coupling reaction of polystyrene macromonomer, carrying 1,1‐diphenylethylene terminus, with polystyryllithium or polyisoprenyllithium. The Y‐shaped branches were prepared throughfurther polymerization initiated by the V‐shaped anions. The obtained branches, carrying a living anion at the middle (V‐shaped) or at the end of the third segment (Y‐shaped), were coupled in situ with pendent benzyl chloride of PS‐co‐PCMS to form the target graft (co)polymers. The purified graft (co)polymers were analyzed by size exclusion chromatography equipped with a multiangle light scattering detector and a viscometer. The result shows that the viscosities and radii of gyration of the branched polymers are remarkably smaller than those of linear polystyrene. In addition, V‐shaped product adopts a more compact conformation in dilute solution than the Y‐shaped analogy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4013–4025, 2007     

Clustering study in Eu(DBM)3Phen-doped polymer optical fibers by optical properties and near-field scanning microscopy

The clusters of Eu3+ ion in Eu(DBM)3Phen-doped polymethyl methacrylate (PMMA) have been studied by three means. The relative fluorescence intensity ratio of the 5D0 → 7F2 to 5D0 → 7F1 transitions with different concentrations of Eu3+ in Eu(DBM)3Phen-doped PMMA and metastable-state (5D0) lifetime dependence on Eu3+ concentration are analyzed. The analysis indicates that there are no clustering effects in Eu3+ ions of Eu(DBM)3Phen-doped PMMA when the Eu3+ doping concentration is up to 1.0 wt.-%. At the same time, the clustering effect has not been observed by the scanning near-field optical microscopy (SNOM) in Eu(DBM)3Phen-doped PMMA with 1.0 wt.-% of Eu3+ ions. The analysis reveals that a high concentration of Eu3+ can be incorporated into polymer optical fiber (POF) without clustering effect.OCIS codes: 180.5810, 300.6280, 250.5460, 160.5690.     

Low-threshold interband cascade lasers operating above room temperature

Mid-IR type-II interband cascade lasers were demonstrated in pulsed mode at temperatures up to 325 K and in continuous mode up to 200 K. At 80 K, the threshold current density was 8.9 A/cm² and a continuous wave output power of 140 mW/facet was obtained.     

<Emphasis FontCategory="NonProportional">L</Emphasis>-Matrices and solvability of linear complementarity problems by a linear program-Matrices and solvability of linear complementarity problems by a linear program

The classes ofL ₁-matrices,L ₂-matrices,L ₃-matrices andW-matrices are introduced to study solvability of a linear complementarity problem via solving a linear program. Three sufficient conditions are presented to guarantee that a linear complementarity problem is solvable via a linear program. The new sufficient conditions are weaker than the ones introduced by Mangasarian. This fact is also illustrated by an example. Partially supported by NSFC. This author is also with College of Business Administration of Human University as a Lotus chair professor.     

Value of Optical Bypass in Packet Ring Networks

This paper firstly examines the value of optical bypass scheme in packet ring networks. An Integer Linear Program (ILP) formulation is presented and analytical results under different traffic patterns are given.     

Development of a Millimeter Wave Compact Equipment for NDT of Materials

We developed a compact equipment working at 94 GHz to replace the commonly used network analyzer for nondestructive testing of materials. The compact equipment was designed to measure the variations in the amplitude and phase of the reflected signal from the material relative to a reference signal. A good accuracy of the amplitude and phase measurement of the equipment was obtained in the confirmative experiments. The distribution of a drop of water in a wood plate is clearly visible in the millimeter wave images obtained by the amplitude and phase measurement.