Chromogenic reaction of bromopyrogallol red with tri- and hexavalent chromium in the presence of cetyltrimethyl ammonium bromide and its application in Cr speciation

The coordination reactions of bromopyrogallol red (BPR) with tri- and hexavalent chromium in the presence of cetyltrimethylammonium bromide (CTAB) have been studied by absorption spectrometry. Results show that the reactions of Cr(VI) and Cr(III) with BPR in the absence or presence of CTAB have different temperature dependences. The reaction mechanism of Cr(VI) is that Cr(VI) is first reduced by BPR to Cr(III) and then the Cr(III) produced reacts with BPR. Based on the study on the coordination reactions and the effects of surfactants upon them, a simple, rapid, sensitive and accurate method for Cr speciation has been developed. Over the range of 0–8 g Cr(VI) or 0–12g Cr(III) per 25ml final volume, the calibration curve is linear with a detection limit of 3.5 × 10^–7 mol/1 for Cr(VI) or 4.4 × 10^–7 mol/1 for Cr(III).     

N-甲基苯胺、二苯胺与质子受体相互作用的研究

测量了N-甲基苯胺、二苯胺与一些极性非质子溶剂（B）在CCl_4中的红外光谱，观察到这两种劳胺均与所研究的质子受体发生了氢键交叉缔合作用，并利用光谱数据计算了相应缔合物的形成常数和部分氢键能．结果表明，二苯胺是比N-甲基苯胺更强的质子供体，非质子溶剂的极性、空间效应和不同成键原子对交叉缔合物的稳定性均有一定的影响．还从分子结构对有关结果进行了讨论.     

Separation and determination of carnosine-related peptides using capillary electrophoresis with laser-induced fluorescence detection

A capillary electrophoresis (CE) method with laser-induced fluorescence (LIF) detection was developed for the separation and detection of carnosine-related peptides (carnosine, anserine, and homocarnosine). A sensitive and fluorogenic regent, 3-(4-carboxybenzoyl) quinoline-2-carboxaldehyde (CBQCA) was selected as a precapillary labeling reagent for imidazole dipeptides to form isoindole derivatives. The optimized molar ratio between CBQCA and peptide was found to be 75:1, and 50 mmol/L borate buffer (pH 9.2) was used for the derivatization in order to achieve good efficiency. Three imidazole dipeptides were baseline-separated within 20 min by using 112 mmol/L sodium borate (pH 10.4-10.8) as running buffer. Concentration detection limits (signal-to-noise ratios) for carnosine, anserine, and homocarnosine were 4.73, 4.37, and 3.94 nmol/L, respectively. This method has been applied to the analysis of human cerebrospinal fluid (CSF) and meat dry powder of pig and sheep. Recoveries were in the range of 82.9-104.8% for homocarnosine in CSF. For carnosine and anserine, the recoveries are 98.3% and 80.2% in meat dry powder of pig and 111.2% and 112.8% in meat dry powder of sheep, respectively.     

Curing behavior and toughening performance of epoxy resins containing hyperbranched polyester

The effects of the hyperbranched polyester with hydroxyl end groups (HBPE‐OH) on the curing behavior and toughening performance of a commercial epoxy resin (diglycidyl ether of bisphenol A, DGEBA) were presented. The addition of HBPE‐OH into DGEBA strongly increased its curing rate and conversion of epoxide group due to the catalytic effect of hydroxyl groups in HBPE‐OH and the low viscosity of the blend at curing temperature. The improvements on impact strength and critical stress intensity factor (or fracture toughness, K_1c) were observed with adding HBPE‐OH. The impact strength was 8.04 kJ m^?1 when HBPE‐OH reached 15 wt% and the K_1c value was approximately two times the value of pure epoxy resin when HBPE‐OH content was 20 wt%. The morphology of the blends was also investigated, which indicated that HBPE‐OH particles, as a second phase in the epoxy matrix, combined with each other as the concentration of HBPE‐OH increased. Copyright © 2004 John Wiley & Sons, Ltd.     

Determination of Sulfonamides in Pharmaceuticals and Rabbit Plasma by Microchip Electrophoresis with LED-IF Detection

In this paper, we describe a compact and low-cost light-emitting diode-induced fluorescence (LED-IF) detection coupled to microchip electrophoresis for the determination of sulfonamides in pharmaceutical formulations and rabbit plasma. Three fluorescein isothiocyanate-labeled sulfonamides in rabbit plasma were separated in the running buffer of 40 mM phosphate buffer (pH 7.0) at the separation voltage of 2.0 kV, and detected by LED-IF detector in which the high-power blue LED was driven at the constant current of 150 mA and the emitted fluorescence over 510 nm was collected by a planar photodiode. The linear concentration ranged from 2.0 to 125.0 μg mL⁻¹, both for sulfadiazine and sulfamethazine with the correlation coefficients (r ²) of 0.995 and 0.997, respectively, and from 2.0 to 100.0 μg mL⁻¹ with the correlation coefficients (r ²) of 0.997 for sulfaguanidine. The limits of detection for the three sulfonamides were 0.36–0.50 μg mL⁻¹ (S/N = 3). Intra-day and inter-day precision of migration time and peak area for the determination of sulfonamides were <4.5 %. This method has been successfully applied to the analysis of sulfonamides in pharmaceuticals, and could be used to study the pharmacokinetics of sulfonamides in rabbit.

     

Electrostatic Interactions Leading to Hierarchical Interpenetrating Electroconductive Networks in Silicon Anodes for Fast Lithium Storage

Recently, the frequency of combining MXene, which has unique properties such as metal-level conductivity and large specific surface area, with silicon to achieve excellent electrochemical performance has increased considerably. There is no doubt that the introduction of MXene can improve the conductivity of silicon and the cycling stability of electrodes after elaborate structure design. However, most exhaustive contacts can only improve the electrode conductivity on the plane. Herein, a MXene@Si/CNTs (HIEN-MSC) composite with hierarchical interpenetrating electroconductive networks has been synthesized by electrostatic self-assembly. In this process, the CNTs are first combined with silicon nanoparticles and then assembled with MXene nanosheets. Inserting CNTs into silicon nanoparticles can not only reduce the latter‘s agglomeration, but also immobilizes them on the three-dimensional conductive framework composed of CNTs and MXene nanosheets. Therefore, the HIEN-MSC electrode shows superior rate performance (high reversible capacity of 280 mA h⁻¹ even tested at 10 A g⁻¹), cycling stability (stable reversible capacity of 547 mA h g⁻¹ after 200 cycles at 1 A g⁻¹) and applicability (a high reversible capacity of 101 mA h g⁻¹ after 50 cycles when assembled with NCM622 into a full cell). These results may provide new insights for other electrodes with excellent rate performance and long-cycle stability.     

Boron-iron nanochains for selective electrocatalytic reduction of nitrate

The electrocatalysis of nitrate reduction reaction(NRR) has been considered to be a promising nitrate removal technology.Developing a highly effective iron-based electrocatalyst is an essential challenge for NRR.Herein,boron-iron nanochains(B-Fe NCs) as efficient NRR catalysts were prepared via a facile lowcost and scalable method.The Fe/B ratio of the B-Fe NCs-x can be elaborately adjusted to optimize the NRR catalytic performance.Due to the electron transfer from boron to metal,the metal-metal bonds are weakened and the electron density near the metal atom centers are rearranged,which are favor of the conversion from NO_3~-into N_2.Moreover,the well-crosslinked chain-like architectures benefit the mass/electron transport to boost the exposure of abundant catalytic active sites.Laboratory experiments demonstrated that the optimized B-Fe NCs catalyst exhibits superior intrinsic electrocatalytic NRR activity of high nitrate conversion(～80%),ultrahigh nitrogen selectivity(～99%) and excellent long-term reactivity in the mixed electrolyte system(0.02 mol/L NaCl and 0.02 mol/L Na_2 SO_4 mixed electrolyte),and the electrocatalytic activity of the material shows poor performance at low chloride ion concentration(Nitrate conversion of ～61 % and nitrogen selectivity of ～57% in 0.005 mol/L NaCl and 0.035 mol/L Na_2 SO_4 mixed electrolyte).This study provides a broad application prospect for further exploring the highefficiency and low-cost iron-based functional nanostructures for electrocatalytic nitrate reduction.     

Enhanced photocatalytic activity of hybrid reduced graphene oxide–CeO2 hierarchical flower-like nanostructures

Research on Chemical Intermediates - The combination of the unique properties of graphene with functional characteristics of metal oxides is an interesting pathway to achieve desirable properties...