Piezoelectric Crystal Liquid Flow Detection Systems Based on Alkyl (C18)‐Benzo‐15‐Crown 5 for Organic Compounds and Metal Ions

A water in soluble long‐chain crown ether alkyl (C18)‐benzo‐15‐crown‐5 was synthesized and applied as a coating material on quartz crystal membranes of a liquid flow piezo electric crystal sensor. The oscillating crown ether‐coated piezo electric (PZ) crystal with a home‐made computer inter face was prepared as a liquid chromato graphic (LC) detector for organic species and metal ions in aqueous solutions. The oscillating frequency of the quartz crystal decreased due to the adsorption of organic molecules or metal ions on crown ether molecules. Effects of functional group, molar mass, steric hindrance, and polarity of organic molecules on frequency responses of the crown ether coated PZ crystal detector were investigated. The frequency responses of the crown ether coated PZ crystal detector for various molecules were in the order: amines > carboxylic acids > alcohols > ketones. The crown ether PZ detector also exhibited good sensitivity for some heavy metal ions and the frequency shifts were in the order: Cr³⁺ » Pb²⁺ > Co²⁺ > Cd²⁺ > Ni²⁺ > Cu²⁺. The crown ether coated piezo electric crystal LC detector demonstrated low detection limits for various polar organic molecules, e.g., 6.0 × 10^?5 M for propylamine, and metal ions, e.g., 2.9 × 10^?5 M (1.8 ppm) for Cu²⁺; the crown ether PZ detector also gave good reproducibility when re used. A quite sensitive electrochemical quartz crystal microbalance (EQCM) detection system was also set‐up for detecting trace heavy metal ions in solutions. The variation in frequency of the PZ crystal and the diffusion current were observed simultaneously after the reduction in heavy metal ions such as Cu²⁺ and Ni²⁺. The EQCM detection system exhibited fairly good sensitivity, e.g., 112 Hz/ppm for Cu²⁺ and a good detection limit, e.g., 0.13 ppm for Cu²⁺ ions. Comparison between EQCM and PZ detection systems was made and discussed.     

Preparation and Application of Cholesteryl‐Macrocyclic Polyether Liquid Crystals and Surfactants

Macrocyclic polyethers containing a cholesteryl moiety, e.g., cholesteryl benzo‐15‐crown‐5 (C₂₇H₄₅OOC‐B15C5) and cholesteryl cryptand22 (C₂₇H₄₅OOC‐Cryptand22), were synthesized. The cholesteryl crown ether C₂₇H₄₅OOC‐B15C5 showed liquid crystal characteristics which were observed by polarizing microscopy. In contrast, the cholesteryl cryptand C₂₇H₄₅OOC‐Cryptand22 showed no liquid crystal characteristics. The doping effect of inorganic salts on the liquid crystal formation of cholesteryl benzo‐15‐crown‐5 was also investigated, revealing that the addition of salts resulted in narrower liquid crystal temperature ranges. Both cholesteryl cryptand C₂₇H₄₅OOC‐Cryptand22 and cholesteryl crown ether C₂₇H₄₅OOC‐B15C5 also exhibited the distinctive characteristics of surfactants in solutions. Fluorescence probe of pyrene and surface tension measurement were applied as sensitive tools to study the formation of the micelles and determine the critical micellar concentration (CMC) of the cholesteryl cryptand and crown ether surfactants. The salt effect on the CMC of the cholesteryl cryptand surfactant was also investigated and is discussed. Furthermore, the cholesteryl benzo‐15‐crown‐5 was successfully employed as a quite good phase transfer catalyst for the oxidation of alcohols, e.g., benzhydrol, with NaMnO₄ as an oxidant. Effects of temperature, solvent and concentration of the crown ether catalyst on the oxidation of benzhydrol were also investigated.     

A new optical fiber reactor for the photocatalytic degradation of gaseous organic contaminants

The main objective of this study was to develop a simple, energy-efficient photoreactor for operating at room temperature. In this work, the design of a new gas-phase optical fiber photoreactor (OFP) was introduced which operated under various parameters, such as the UV light intensity and the initial concentration for the photocatalytic decomposition of acetone. Experimental results indicated that increasing the UV light intensity or decreasing the initial concentrations of acetone by a UV/TiO₂ process would result in improving the decomposition and mineralization efficiencies. The apparent quantum yield of the novel optical fiber reactor is about 2 to 3 times greater than that of the traditional annular reactor.     

On the Study of Jamming Percolation

We investigate kinetically constrained models of glassy transitions, and determine which model characteristics are crucial in allowing a rigorous proof that such models have discontinuous transitions with faster than power law diverging length and time scales. The models we investigate have constraints similar to that of the knights model, introduced by Toninelli, Biroli, and Fisher (TBF), but differing neighbor relations. We find that such knights-like models, otherwise known as models of jamming percolation, need a “No Parallel Crossing” rule for the TBF proof of a glassy transition to be valid. Furthermore, most knights-like models fail a “No Perpendicular Crossing” requirement, and thus need modification to be made rigorous. We also show how the “No Parallel Crossing” requirement can be used to evaluate the provable glassiness of other correlated percolation models, by looking at models with more stable directions than the knights model. Finally, we show that the TBF proof does not generalize in any straightforward fashion for three-dimensional versions of the knights-like models.     

Enhanced Temporal Stability of an NLO Polyurethane via a Two‐Dimensional Chromophore

A new NLO‐active polyurethane (T_g = 145°C) based on a two‐dimensional NLO chromophore has been investigated. Two ends of this lambda‐shaped chromophore can be directly bound to the main chain of polyurethane. After poling, fast relaxation of the effective second harmonic (SH) coefficient was observed at temperatures higher than 122°C. Moreover, excellent temporal stability at 100°C was obtained despite the operating temperature being very close to the fast relaxation temperature. This is due to the fact that embedding the rigid lambda‐shaped chromophores into the polymer backbone effectively restricts molecular motion at temperatures close to T_g.     

Dielectric study of ferroelectric side-chain liquid crystalline polysiloxanes with broad temperature ranges of the chiral smectic C phase 1. Structure dependence of dielectric relaxation

The dielectric behavior of a series of ferroelectric side-chain liquid crystalline polysiloxanes containing 1–3 oligooxyethylene units as spacers, and 4-(S)-2-methyl-1-butyl[[[(4-hydroxy-biphenyl-4′-yl)]carbonyl]oxy] benzoate or 4-(S)-2-methyl-1-butyl[[(4-hydroxy-biphenyl-4′-yl)carbonyl]oxy]-3-fluoro benzoate side groups was studied by broadband dielectric spectroscopy. The increase of the spacer length, and incorporation of a strong dipole moment fluoro-substituent into the mesogenic group, resulted in a decrease of the relaxation activation energy and an increase in the intensity of the relaxation. Moreover, the relaxation peak of the Goldstone mode has only been observed for the FLCP with a lateral fluoro-substituent. The relationship between the thermal dynamic behavior and chemical structure is discussed in detail. Furthermore, analysis of the dielectric relaxation behavior of these FLCPs showed that the molecular relaxations could be described by the Cole-Cole equation. © 1996 John Wiley & Sons, Inc.     

Chemical and Cytotoxic Constituents from the Stem of Machilus zuihoensis

Five new compounds, including a novel lactone, machilactone (=rel‐(2R,3aR,6E,6aS)‐2‐heptadecyl‐3a‐methyl‐6‐octadecylidene‐6,6a‐dihydrofuro[2,3‐d][1,3]dioxol‐5(3aH)‐one; 1 ), a new sesquiterpene, 3,4‐dihydroxy‐β‐bisabolol (=rel‐(1R,2S,4R)‐1‐[(1R)‐1,5‐dimethylhex‐4‐enyl]‐1‐methylcyclohexane‐1,2,4‐triol; 2 ), a new secobutyrolactone, methyl (2E)‐2‐(1‐hydroxy‐2‐oxopropyl)eicos‐2‐enoate ( 3 ), two new butyrolactones, machicolide A ( 4 ) and machicolide B ( 5 ) (=3E,4R,5R)‐ and (3Z,4R,5R)‐4,5‐dihydro‐4‐hydroxy‐5‐methoxy‐5‐methyl‐3‐octadecylidenefuran‐2(3H)‐one, resp.) as a mixture, together with known caryophyllene oxide (=4,12,12‐trimethyl‐9‐methylene‐5‐oxatricyclo[8.2.0.0^4,6]dodecane), hexacosane, tetracosanoic acid, isomahubanolide‐23 (=(3E,4R)‐4,5‐dihydro‐4‐hydroxy‐5‐methylidene‐3‐octadecylidenefuran‐2(3H)‐one), and β‐bisabolol (=(1S)‐1‐[(1S)‐1,5‐dimethylhex‐4‐enyl]‐4‐methylcyclohex‐3‐en‐1‐ol) were isolated from the stem wood of Machilus zuihoensis. The structures of these compounds were established by spectroscopic studies. The eicos‐2‐enoate ( 3 ) and β‐bisabolol exhibited marginal cytotoxicity against NUGC and HONE‐1 cancer cell lines in vitro.     

An efficient method for the identification of the modified Cockroft–Latham fracture criterion at elevated temperature

The paper presents the theoretical part of a method for the identification of the modified Cockroft–Latham ductile fracture criterion at elevated temperature. Quite a general viscoplastic model is adopted to describe material behavior. The original criterion is path-dependent and involves stresses. Therefore, the identification of constitutive parameters of this criterion, as well as many other ductile fracture criteria, is rather a difficult task that usually includes experimental research and numerical simulation. The latter is impossible without a precisely specified material model and boundary conditions. It is shown in the present paper that for a wide class of material models usually used to describe the behavior of materials at elevated temperatures, the criterion is significantly simplified when the site of fracture initiation is located on traction-free surfaces. In particular, this reduced criterion solely depends on two in-surface logarithmic strains. Since there are well-established experimental procedures to measure surface strains, the result obtained can be considered as a theoretical basis for the efficient method for the identification of the modified Cockroft–Latham ductile fracture criterion at elevated temperature.     

Wave-current-induced soil response in marine sediments

This letter presents a new analytical approximation for wave (current)-induced dynamic soil response in marine sediments. In the model, the third-order approximation for wave-current interactions is employed for the flow model, while Biot's dynamic poro-elastic model is used to simulate the porous flow in a seabed. The newly analytical solution is validated with the field observations. Based on the solution, effects of currents and wave-nonlinearity on soil response are examined and a parametric study will be carried out to examine the influence of currents on the liquefaction potential.     

Enhancement of field emission properties of graphite flakes by producing carbon nanotubes on above using thermal chemical vapor deposition

In order to improve the field emission properties of the graphite flakes, the carbon nanotubes (CNTs) are produced on above without the metallic catalyst using mixtures of C₂H₂ and H₂ gases by thermal chemical vapor deposition. We spin the graphite solution on the silicon wafer and dry it, then synthesize the CNTs on the graphite flakes. We change the synthetic time to obtain the optimal conditions for enhancement of field emission properties of graphite flakes. The experimental results show that the density and quality of the CNTs could be controlled significantly by the synthetic time. Besides, the field emission properties of the treated graphite flakes are also affected greatly by it. The emission current density of the treated graphite flakes reaches to 0.5 mA/cm² at 3 V/μm, and the turn-on field is decreased from 7.7 to 1.9 V/μm after producing the CNTs on above.