马来酸酐与二苄基马来酸酯共存体系的荧光分析法研究

本实验测定了二苄基马来酸酯甲醇溶液的荧光光谱，并发现马来酸酐对该荧光体系有猝灭作用，通过对不同马来酸酐浓度与各种浓度的二苄基马来酸酯甲醇溶液在４００ｎｍ处荧光强度数据的分析，发现马来酸酐的浓度与荧光猝灭程度在一定范围内呈良好的线型关系。据此，提出了用荧光猝灭法对马来酸酐及二苄基马来酸酯的定量分析     

胶束催化及胶束模拟酶性能的研究

本文对胶束催化的有机反应进行综述,并对其模拟酶的催化功能作了评论。     

钴铬水滑石的合成及表征

采用共沉淀法合成了一系列不同Co/Cr物质的量比的碳酸根型水滑石。用X－衍射、红外光谱、差热、热重、分光光度等方法对其组成和结构进行了研究。结果表明Co/Cr投料比为2到3时能形成结晶度好、纯度高的水滑石。初步推测了部分产物的组成及所含水滑石的化学式。     

Poly[μ‐aqua‐μ4‐naphthalene‐1,8‐dicarboxylato‐zinc(II)]

In the title complex, [Zn(C₁₂H₆O₄)(H₂O)]_n, a Zn^II polymer based on naphthalene‐1,8‐dicarboxylate (1,8‐nap), the Zn^II atoms adopt an elongated octahedral coordination geometry. A zigzag chain is formed by μ₂‐aqua ligands and μ₂‐carboxylate groups of the 1,8‐nap ligands. Adjacent parallel chains are further linked by 1,8‐nap ligands, forming a twisted two‐dimensional layer structure along the (100) plane.     

Curing reaction characteristics and phase behaviors of biphenol type epoxy resins with phenol novolac resins

Diglycidyl ether of 4,4′-dihydroxybiphenol (BPDGE) is a liquid crystalline epoxy. The biphenyl epoxy (diglycidyl ether of 3,3′,5,5′-tetramethyl-4,4′-biphenyl, TMBPDGE) has found great applications in plastic encapsulated semiconductor packaging. Phenol novolac (PN) was used as curing agent. The reaction kinetics of BPDGE/PN and TMBPDGE/PN systems in the presence of triphenylphosphine (TPP) were characterized by an isoconversional method under dynamic conditions using differential scanning calorimetry (DSC) measurements. The results showed that the curing of epoxy resins involves different reaction stages and the values of activation energy are dependent on the degree of conversion. The effects of curing temperature on their phase structure have been investigated with polarized optical microscopy and Wide-angle X-ray diffraction. With proper curing process, BPDGE showed a nematic phase when cured with PN.     

生物相容性BAB型两亲嵌段共聚物的合成及其自组装

Lys(z)-NCA was synthesized in the presence of triphosgene, amphiphilic triblock copolymers poly(N^c-CBZ-Lysine)-PEG-poly(N^c-CBZ-Lysine) were synthesized in DMF using amino-end ended PEG as initiator with the mechanism of anion ring opening polymerization. The structures of block copolymers were characterized by IR, ^1H-NMR,GPC and DSC. The results showed triblock copolymers with expected structure and low polydispersity in molecular weight could be synthesized by this method. At the same time, the self-assembling behaviors of block copolymer were investigated by TEM. A novel helical aggregates were found to be formed in DMF. Because of biocompatibility of two components of block copolymers, these block copolymers have potential applications in the field of biomaterials.     

水热改性对NiMo/γ-Al2O3加氢脱氮催化剂结构及性能的影响

The influence of hydrothermal modification on the structure and hydrodenitrogenation (HDN) activity of NiMo/γ-Al₂O₃catalyst was studied in the range 140～180 ℃. The experimental results indicated that the hydrodenitrogenation reaction rate of pyridine was accelerated using the NiMo/γ-Al₂O₃catalyst synthesized via hydrothermal route due to the change of the structure, the increase of the amount of Mo and Ni and the rise of the specific surface area. The change of the structure of catalysts was enhanced at higher hydrothermal temperature, producing NiMo/γ-Al₂O₃catalyst with better HDN activity.     

含芳硫基的新三唑类化合物的合成及生物活性研究

许多三唑类化合物具有优良的杀菌和植物生长调节活性 ,如三唑酮、三唑醇、烯效唑、烯唑醇等 ,对常见真菌病害具有很好的防治效果 ,并具有增产、抗倒和生长调节作用 ,已成为重要的杀菌剂类型 [1] .为筛选新型高活性三唑类杀菌剂和探讨其活性与结构间的关系 ,我们利用生物等排体理论以常规三唑类杀菌剂三唑酮为先导物设计合成了 1 6个含芳硫基的新三唑类化合物 ,其合成路线如下 :RCCH2 BrO+HNNNB NRCCH2O NNHAC-Na ACBr2NRCCHOBrNN(1 ) (2 ) (3 )3 +SH 　R′B NRCCHOS　R′NN　 (4 )RCCH2 CH2 NMe2 .HClO+HNNNH2 O…     

Preparation,lithiation and transformation of N-(benzotriazol-1-ylmethyl) heterocycles

Indole, carbazole, pyrrole, imidazole, benzimidazole, 2-methyl- and 2-phenylbenzimidazole, and 1, 2, 4-triazole have each been converted into their N-(benzotriazol-1-ylmethyl) derivatives. The pyrrole, indole, and carbazole adducts undergo smooth lithiation at the inter-ring methylene group and subsequent reaction there with electrophiles. For the imidazole, benzimidazole, and triazole systems, lithiations at other molecular positions competed.     

Modification of the halogen end groups of polystyrene prepared by ATRP

The stabilization modification of the halogen end groups of polystyrene prepared by atom transfer radical polymerization (ATRP) has been attempted. The reaction mechanism adopted is radical chain transfer reaction, and iso-propylbenzene is employed as not only the chain transfer agent but also the solvent. Moreover, Cu⁰ is used as the acceptor of the transformed halogen atom in some experiments. As evidenced by ¹H NMR analysis of the modified products, the halogen end group can really be converted into the much more stable carbon-hydrogen structure. When Cu⁰ is not used, the conversion of the halogen end groups rises rapidly during the early stage and the increase rate slows down after about 8 h reaction. In view of the influence of reaction temperature on the modification, the conversion increases almost exponentially with temperature in the range of 80-100 °C, and the increase rate slows down at higher temperature. ¹H NMR and SEC analyses prove that the modification reaction does not destroy the polymer backbone and the molecular weights remain almost the same as those of the unmodified samples. When Cu⁰ is introduced, the modification reaction proceeds much rapidly, the conversion of the halogen end groups rises almost linearly at the early stage and the nearly complete (>95%) dehalogenation of the polymeric chains is observed after only 12 h reaction. However, the molecular weights rise and the polydispersities become wider after the modification, which implies that the modification is accompanied with the couple termination of the polystyrene radicals besides chain transfer reaction. Furthermore, the couple termination can be restrained at some lower catalyst concentration. Indeed, the modified polymers show improved thermal stability, the initial weight loss temperatures is increased from 196 °C to 378 °C for the linear polystyrene and from 203 °C to 261 °C for the hyperbranched polystyrene.