Wide-angle beam splitting by use of positive-negative refraction in photonic crystals

We present a positive-negative refraction effect in which, under certain conditions, an incident plane wave launched into a photonic crystal excites a positive-refracted Bloch wave and a negative-refracted Bloch wave simultaneously, both of which maintain the polarization. By utilizing this phenomenon, wide-angle beam splitting can be realized at the microscale level. Numerical simulations are employed to demonstrate this anomalous refraction behavior.     

Direct synthesis of porous NiO nanowall arrays on conductive substrates for supercapacitor application

Porous NiO nanowall arrays (NWAs) grown on flexible Fe-Co-Ni alloy have been successfully synthesized by using nullaginite (Ni₂(OH)₂CO₃) as precursor and investigated as supercapacitor electrodes. In details, we adopted a simple hydrothermal method to realize Ni₂(OH)₂CO₃ NWAs and examined their robust mechanical adhesion to substrate via a long-time ultrasonication test. Porous NiO NWAs were then obtained by a post-calcination towards precursors at 500 °C in nitrogen atmosphere. Electrochemical properties of as-synthesized NiO NWAs were evaluated by cyclic voltammetry and galvanostatic charge/discharge; porous NiO NWAs electrode delivered a specific capacitance of 270 F/g (0.67 A/g); even at high current densities, the electrode could still deliver a high capacitance up to 236 F/g (13.35 A/g). Meanwhile, it exhibited excellent cycle lifetime with ∼93% specific capacitance kept after 4000 cycles. These results suggest that as-made porous NiO NWAs electrode is a promising candidate for future thin-film supercapacitors and other microelectronic systems.     

测算具有方向技术效率的DEA方法

本文总结了现有技术效率的主要测算方法，借鉴定向技术距离函数思想，结合DEA思路，提出了一种新的用于技术效率指数测算的模型，并进一步探讨了如何识别决策单元的技术有效性和如何改进非技术有效决策单元的问题．着重分析了该技术效率指数模型与L型技术效率指数的关系，指出该模型是L型技术效率指数模型的一般形式．     

环形电子束积分图像诊断技术

 采用图像诊断方法对高能环形电子束形状及空间尺寸进行了研究,以高能脉冲环形电子束轰击高Z靶材料产生脉冲X射线,X射线经过X射线增感屏转换为可见光,用单次图像采集系统获取可见光的积分图像。为满足诊断所需的空间分辨和系统灵敏度,通过理论计算确立了靶的材料、厚度及X射线增感屏的型号和厚度等参数。根据测试环境,设计了系统的现场安装结构,系统基本满足测试要求。分析从实验中获取的图像,可知环形电子束的内径为36.5 mm,环厚为1 mm,环形不均匀,水平方向电子束强。     

Optimum convective heat transfer coefficient for diode-pumped laser slabs

It is important for laser designers to study the characteristics of heat transfer from the laser crystal slab to the coolant in high-power DPSS laser operations. We have simulated and obtained the optimum heat transfer coefficient and coolant flow rate for our cavity design, in which the circulating coolant is maintained at a constant temperature. It has been determined that the coolant temperature and the convective heat transfer coefficient (h) are important parameters in the thermal analysis. The coefficient h is affected by the coolant flow rate, the physical properties of the laser slab and the coolant and the pumping cavity geometry. Using analytical heat transfer equation, for cooling water temperature of 300 K, the optimum flow rate for our cavity geometry is found to be 390 cm³/s, corresponding to h=5 W/cm² K.