Passive harmonic mode locked all-normal-dispersion Yb-doped fibre lasers

Passive harmonic mode-locking of dissipative solitons is demonstrated in all-normal dispersion Yb-doped fibre lasers.A difference equation model of the mode-locked fibre lasers is adopted to simulate the intra-cavity nonlinear dynamics.Hysteresis phenomena around the mode-locking threshold,and the effect of introducing linear phase bias are discussed.The passive harmonic mode-locking as one kind of multipulsing operations is revealed.Moreover,the simulation shows the bistability between multipulsing and single-pulse or period multiplication.     

PPLT倍频宽线宽掺镱双包层光纤放大激光

分别通过理论和实验研究了周期性极化的钽酸锂（PPLT）倍频宽线宽准连续掺镱双包层光纤放大激光.PPLT样品长为40 mm,极化周期为7.67 μm.基频光的中心波长为1064 nm,线宽约为6 nm.从基频光的光谱特性出发,利用超晶格倍频理论,解释了实验中获得的倍频温度与二次谐波功率之间的关系.在基频光的功率为2.2 W时,获得的宽线宽光纤激光倍频效率为1.8%.     

Direct single-layered fabrication of 3D concavo–convex patterns in nano-stereolithography

A nano-surfacing process (NSP) is proposed to directly fabricate three-dimensional (3D) concavo–convex-shaped microstructures such as micro-lens arrays using two-photon polymerization (TPP), a promising technique for fabricating arbitrary 3D highly functional micro-devices. In TPP, commonly utilized methods for fabricating complex 3D microstructures to date are based on a layer-by-layer accumulating technique employing two-dimensional sliced data derived from 3D computer-aided design data. As such, this approach requires much time and effort for precise fabrication. In this work, a novel single-layer exposure method is proposed in order to improve the fabricating efficiency for 3D concavo–convex-shaped microstructures. In the NSP, 3D microstructures are divided into 13 sub-regions horizontally with consideration of the heights. Those sub-regions are then expressed as 13 characteristic colors, after which a multi-voxel matrix (MVM) is composed with the characteristic colors. Voxels with various heights and diameters are generated to construct 3D structures using a MVM scanning method. Some 3D concavo–convex-shaped microstructures were fabricated to estimate the usefulness of the NSP, and the results show that it readily enables the fabrication of single-layered 3D microstructures. PACS 85.40.Hp; 81.16.Nd; 42.82.Cr     

TiN/Al2O3纳米多层膜的共格外延生长及超硬效应

采用多靶磁控溅射法制备了一系列具有不同Al2O3调制层厚度的TiN/Al2O3纳米多层膜.利用X射线能量色散谱、X射线衍射、扫描电子显微镜、高分辨透射电子显微镜和微力学探针表征了多层膜的成分、微结构和力学性能.研究结果表明,在TiN/Al2O3纳米多层膜中,单层膜时以非晶态存在的Al2O3层在厚度小于1.5 nm时因TiN晶体层的模板效应而晶化,并与TiN层形成共格外延生长,相应地,多层膜产生硬度明显升高的超硬效应,最高硬度可达37.9 GPa.进一步增加多层膜中Al2O3调制层的层厚度,Al2O3层逐渐形成非晶结构并破坏了多层膜的共格外延生长,使得多层膜的硬度逐步降低.     

分子内氢键对芳氢化学位移值影响的研究

通过对19个酚类化合物¹H NMR谱的研究和分析发现,酚羟基形成分子内氢键后,使对位芳氢化学位移值向高场变化的幅度大于邻位,其差值约为0.1ppm-0.3ppm.     

The dynamics of one-dimensional random quantum XY system with Dzyaloshinskii-Moriya interaction

In this paper,the effects of random variables on the dynamics of the s = 1/2 XY model with the Dzyaloshinskii-Moriya interaction are studied.By means of the recurrence relation method in the high-temperature limit,we calculate the spin autocorrelation functions as well as the corresponding spectral densities for the cases that the exchange couplings between spins or external magnetic fields satisfy the double-Gaussian distribution.It is found that when the standard deviation of random exchange coupling δJ(or the standard deviation of random external field δB) is small,the dynamics of the system undergoes a crossover from a collective-mode behavior to a central-peak one.However,when δJ(or δB) is large,the crossover vanishes,and the system shows a central-peak behavior or the most disordered one.We also analyze the cases in which the exchange couplings or the external fields satisfy the bimodal and the Gaussian distributions.Our results show that for all the cases considered,the dynamics of the above system is similar to that of the one-dimensional random XY model.     

Beam Combination using Stimulated Brillouin Scattering for the Ultimate High Power-Energy Laser System Operating at High Repetition Rate over 10 Hz for Laser Fusion Driver

After the laser was invented in 1960, a phase conjugation mirror has been respected to be the most fantastic one for the laser resonator composition because it can compensate any distortions of the laser beams occurred by the many inhomogenuities of the laser media and optical components. Among the many phase conjugation configurations, the stimulated Brillouin scattering phase conjugation mirror is the most simple one and many researchers have tried to utilize it to develop high power/energy laser systems. For realizing a high energy/power laser system the thermal problem is the most difficult to solve, and some researchers suggested a beam combination technique to reduce the thermal load of the big laser media to many small sized ones. To accomplish the beam combination using stimulated Brillouin scattering phase conjugation mirrors (SBS-PCMs), it is necessary to lock/control the phases of the SBS-PCMs. And some researchers have developed several ways for it, but they can lock the phases of a limited number of beams overlapped at the foci less than 5, or lock the phases by back-seeding technique but it loses the phase conjugation characteristics. For realization of the laser fusion driver, it is necessary to combine more than 10 or 100 beams. And the authors have developed recently a new phase controlling/locking technique which is isolated and independent totally from other beams and it can be applied to an unlimited number of beams in principle.     

Blume–Emery–Griffiths纳米管的热力学与相变性质

利用有效场理论研究了圆柱形纳米管上Blume-Emery-Griffiths系统的热力学与相变性质,得到了系统的磁化强度、磁化率、比热和相图.讨论了四次交换作用与二次交换作用的比值 与晶格场对系统热力学量和相图的影响.研究发现:系统存在三临界点,且三临界点由参数 和晶格场共同决定,即若确定了参数 ,则三临界点所对应的晶格场也能确定.随着参数 的增加,系统出现三临界点时所对应的温度和晶格场也相应增大.     

基于PLC与ZigBee的室内环境监控系统设计

环境监测点位具有分布范围广、点位多等特点,建立一套基于无线传感网络的环境实时监控系统,实现对区域内环境要素的在线监控,对及时掌握环境状况及有效控制环境污染的扩散有着直接而重要的作用;以CC2530芯片为核心构建ZigBee无线传感网络,并通过主控制器PLC将采集的数据进行分析与处理;利用主协调器及PLC将接收的监测数据传至上位机进行实时显示,由监控平台,结合红外收发器完成对外部设备的远程控制;上位机采用Wincc组态软件,结合西门子精智面板提供优异的人机交互界面体验;通过实验测试表明,该系统可实现大范围的室内环境参数的采集和传输以及远距离监控功能,且具有安装方便、扩展性强等特点,适用于需进行统一管理的智能楼宇建筑。     

Microstructure of laser melted Al18B4O33w/2024Al composite

The microstructure of a laser treated Al₁₈B₄O₃₃w/2024Al composite has been investigated using transmission electron microscope (TEM), low-angle (glancing angle) X-ray diffraction (XRD) techniques. Various surface microstructures were observed in the laser treated composite. The Al₁₈B₄O₃₃ whisker on the surface of the composite was decomposed during laser surface melting, various decomposition products were studied in the laser treated composite. Eutectic phases and the precipitation in the matrix of the composite with laser-treated were observed. The main phases detected in the molten zone were aluminum and decomposition products Al₂O₃. The effect of laser treatment on the hardness of the composite was also examined. A surface hardness of 400 Hv was noted.