元素周期表中元素单晶基于局域密度理论的正电子寿命计算

在局域密度近似理论（LDA）的基础上用中性原子叠加模型和有限插分方法（SNA-FD）计算了元素周期表中各种元素单晶的正电子体寿命和单空位寿命.分析了不同结构的单晶中自由正电子的分布信息和湮没信息.元素单晶的正电子寿命计算值与文献中的实验测量值相符合,表明LDA基础上的SNA-FD方法可以作为单晶中正电子湮没理论计算的有效研究手段. 关键词： 局域密度近似理论 正电子寿命     

Microwave tunable dielectric properties of multilayer CNT membranes for smart applications

We investigated the effect of the length of carbon nanotubes (CNTs) on the electrical property of CNT-based flexible, transparent, and conductive films (TCFs). We grew vertically aligned CNTs with controlled lengths, dispersed them in ethanol by ultrasonication, and spray coated them onto polyethylene terephthalate (PET) sheets. We focused on the variation in the sheet resistance and transmittance of the above-mentioned films as a function of the CNT length, and we found that the optimum CNT length was 200?μm. We concluded that the CNT length should be carefully optimized because a shorter tube affords the advantage of efficient dispersion, while a longer tube helps in reducing the number of contact points between tubes along the electrical conduction path.     

Improving InGaN-LED performance by optimizing the patterned sapphire substrate shape

The epitaxial growths of GaN films and GaN-based LEDs on various patterned sapphire substrates (PSSes) with different values of fill factor (f) and slanted angle (θ) are investigated in detail. The threading dislocation (TD) density is lower in the film grown on the PSS with a smaller fill factor, resulting in a higher internal quantum efficiency (IQE). Also the ability of the LED to withstand the electrostatic discharge (ESD) increases as the fill factor decreases. The illumination output power of the LED is affected by both θ and f. It is found that the illumination output power of the LED grown on the PSS with a lower production of tanθ and f is higher than that with a higher production of tanθ and f.     

Electrical, dielectric and surface wetting properties of multi-walled carbon nanotubes/nylon-6 nanocomposites

This paper reports that the multi-walled carbon nanotubes(MWCNT)/nylon-6 (PA6) nanocomposites with different MWCNT loadingshave been prepared by a simple melt-compounding method. Theelectrical, dielectric, and surface wetting properties of theCNT/PA6 composites have been studied. The temperature dependence ofthe conductivity of the CNT/PA6 composite with 10.0 wt{\%} CNTloading ($\sigma _{\rm RT} \sim 10^{-4}$ S/cm) are measured, andafterwards a charge-energy-limited tunnelling model (ln $\sigma (T)\sim T^{-1/2})$ is found. With increasing CNT weight percentage from0.0 to 10.0 wt%, the dielectric constant of the CNT/PA6composites enhances and the dielectric loss tangent increases twoorders of magnitude. In addition, water contact angles of theCNT/PA6 composites increase and the composites with CNT loadinglarger than 2.0 wt%even become hydrophobic. The obtainedresults indicate that the electrical and surface properties of thecomposites have been significantly enhanced by the embedded carbonnanotubes.     

Equation of state and elastic properties of ACrO3 (A=Pb,Ca, Sr and Ba) perovskites under high pressure

We employ the spin-polarized generalized gradient approximation within the density functional theory to investigate the equation of state, magnetism and elastic constant of cubic ACrO₃ (A=Pb, Ca, Sr, and Ba) perovskite. The antiferromagnetic phase is the most stable state at zero pressure. Under pressure, the ferromagnetic state will transform to the non-magnetic state. Considering the effect of magnetism, the equilibrium lattice constant, the bulk modulus and the high pressure equations of state agree well with the available experiments. By using the energy-strain method, the predicted elastic properties are satisfactory.     

军用运输机机舱有源消声实验系统的设计与实现

为验证有源消声技术在军用运输机机舱低频噪声消除方面的有效性,设计和实现了一套机舱有源消声实验系统。采用“激振器+舱壁板”方式实现了飞机螺旋桨对机舱诱导噪声的声源模拟,设计了基于前馈控制结构的自适应有源噪声控制系统,构建了基于FX-LMS算法的自适应消声控制器,采用监测麦克风组对舱内空间的消声效果进行监测。实验结果验证了自适应有源噪声控制技术在军用飞机舱室消声降噪领域的有效性,并表明初、次级声源间距对自适应有源消声系统的消声效果具有重要的影响。     

Mitochondrial BNIP3 upregulation precedes endonuclease G translocation in hippocampal neuronal death following oxygen-glucose deprivation

Background  

Caspase-independent apoptotic pathways are suggested as a mechanism for the delayed neuronal death following ischemic insult. However, the underlying signalling mechanisms are largely unknown. Recent studies imply the involvement of several mitochondrial proteins, including endonuclease G (EndoG) and Bcl-2/adenovirus E1B 19 kDa-interacting protein (BNIP3), in the pathway of non-neuronal cells.     

金属有机物化学气相沉积法生长Ga2(1-χ)In2χO3薄膜的结构及光电性能研究

采用金属有机物化学气相沉积(MOCVD)法在蓝宝石(0001)衬底上制备出了Ga2(1-χ)In2χO3(χ=0.1-0.9)薄膜,研究了薄膜的结构、电学和光学特性以及退火处理对薄膜性质的影响.测量结果表明:当In组分χ=0.2时,样品为单斜β-Ga2O3,结构;χ=0.5的样品,薄膜呈现非晶结构,退火处理后薄膜结构得到明显的改善,由非晶结构转变为具有(222)单一取向的立方In2O3结构;对于χ=0.8,薄膜为立方In2O3,结构,退火后薄膜的晶体质量得到提高.在可见光区薄膜本身的透过率均达到了85%以上,带隙宽度随样品中Ga含量的改变在3.76-4.43 eV之间变化,且经退火处理后带隙宽度明显增大.     

成对行为对行人疏散动力学的影响研究

熟悉的行人之间经常存在着聚集运动的整体跟随行为现象.为了研究这种行为对疏散过程的影响,考虑了行人的并排成对、前后成对、混合成对三种方式,建立了一个新的元胞自动机模型,研究了三种成对方式对双出口房间内行人疏散过程的影响,并分析、讨论了不同参数下成对方式之间的差异. 关键词： 行人流 元胞自动机 成对疏散 计算机模拟     

多面转镜激光器扫频光学相干层析成像系统的全光谱重采样方法

在多面转镜激光器扫频光学相干层析成像系统中,激光器存在着输出光谱错位与扫频范围波动的问题.目前的重采样方法中,普遍利用互相关运算校正光谱错位,并进行大范围的截取,保证扫频范围的一致性,但这会导致成像信噪比与分辨率的降低.本文用马赫-曾德尔干涉仪(MZI)采集到的干涉信号对扫频范围波动的问题进行了详细的测量与分析,其中干涉信号的解缠相位曲线的非随机性和平行性,表明该类激光器输出光谱的波长分布具备一致性.在此基础上,提出了一种用最长扫频范围的MZI干涉信号,对样品干涉信号进行时域光谱对齐、然后进行一对多插值的重采样方法.实验与分析表明,该方法利用了所有的光谱信号,保证了样品干涉信号的能量利用率,能有效提高图像的信噪比与分辨率.