BaCe1—xRExO3—0.5x的溶胶—凝胶法合成及离子导电性

用溶胶－凝胶法合成了系列钙钛矿结构的ＢａＣｅ１－ｘＲＥｘＯ３－０．５ｘ（ＲＥ＝Ｌａ，Ｎｄ，Ｓｍ，Ｅｕ，Ｇｄ，Ｄｙ，Ｈｏ，Ｅｒ和Ｙ）复合氧化物，通过ＸＲＤ和热分析对样品结构及生成过程进行了研究．测定了不同温度下样品的交流阻抗谱，讨论了稀土离子掺杂对ＢａＣｅＯ３电性质的影响．溶胶－凝胶法比固相反应法合成温度降低了６００～８００℃，稀土掺杂使ＢａＣｅＯ３离子导电率提高了１０～４０倍．     

Asymmetric dimers can be formed by dewetting half-shells of gold deposited on the surfaces of spherical oxide colloids

Asymmetric dimers consisting of gold microcrystals and spherical silica colloids have been fabricated by depositing thin films of gold onto the spherical colloids to form half-shells, followed by annealing at elevated temperatures. The capability and feasibility of this procedure have been demonstrated with silica and titania beads of 0.2-2 mum in diameter and gamma-Fe2O3/polystyrene@SiO2 core-shell particles 0.5 mum in size. The dimensions of gold microcrystals could be conveniently varied in the range of 100-650 nm by controlling the thickness of gold films and/or the diameter of the spherical colloids. This method provides another route to asymmetric dimers made of colloidal particles that could be different in size, chemical composition, surface functionality, density or sign of surface charge, bulk property, or a combination of these properties.     

Two New Xanthone Glycosides from Polygala tenuifolia

Two new xanthone glycosides,polygalaxanthone IV and V were isolated from the roots of Polygala tenuifolia Willd. Their structures were established as 6-O-[α-L-rhamnopyranosyl-(1→2)-β-D-glucopyranosyl]-1-hydroxy-3,7-dimethoxyxanthone(polygalaxanthone IV), and 6-O-[α-L-rhamnopyranosyl-(1→2)-β-D-glucopyranosyl]-1,3-dihydroxyl-7-methoxyxanthone (polyga-laxanthone V),respectively, on the basis of chemical and spectral evidence.     

Determination of atrazine, desethyl atrazine and desisopropyl atrazine in environmental water samples using hollow fiber-protected liquid-phase microextraction and high performance liquid chromatography

A new method based on hollow fiber-protected liquid-phase microextraction (LPME) was developed for the simultaneous determination of atrazine, desethyl atrazine and desisopropyl atrazine in environmental water samples. In LPME, analytes were extracted into 1-octanol immobilized in the micropores of a poly(vinylidene fluoride) porous hollow fiber membrane, and back extracted into the acceptor (4 M HCl) filled in the lumen of the hollow fiber. After LPME, the analytes trapped in the acceptor were analyzed with high-performance liquid chromatography after neutralization. The effect of extraction factors such as sample pH, acceptor pH, salinity, extraction time, stirring rate, and humic acid were studied. Under the optimized conditions, the limits of detection and relative standard deviations were respectively in the range of 0.5–1.0 μg L⁻¹ and 3.9–4.7% (n = 5). The proposed method was applied to determine atrazine, desethyl atrazine and desisopropyl atrazine in wastewater and groundwater samples. The three analytes were below the limits of detection, but good relative spiked recoveries over 90.1 ± 5.9% at 5 μg L⁻¹ spiked level were obtained.     

L-proline promoted Ullmann-type reaction of vinyl bromides with imidazoles in ionic liquids

The Ullmann-type coupling reaction of vinyl bromides and imidazoles in ILs at 90-110 degrees C gave the corresponding N-vinylimidazoles in good to excellent yields by using L-proline as the ligand; the double bond geometry of the vinyl bromides was retained under the reaction conditions.     

Asymmetric direct vinylogous carbon-carbon bond formation catalyzed by bifunctional organocatalysts

The bifunctional chiral thiourea-tertiary amine organocatalysts have been applied to a direct asymmetric vinylogous Michael addition of α,α-dicyanoolefins to nitroolefins with 2-10 mol % catalyst loadings. The electronic properties of the thiourea-based catalysts have significant influences on this reaction. Moderate to excellent enantioselectivities (57-95% ee) have been achieved with low to good isolated yields through fine tuning the structures of the bifunctional organocatalysts. Much better ees were obtained for some α,α-dicyanoolefinic substrates compared with that catalyzed by modified cinchona alkaloids.     

最小一乘稳健多元分析校正

本文论述最小一乘求解的多元分析校正算法，探讨了最小一乘较常规最小二乘法及其他隐健算法的优点。用计算机数值模拟及实际多组分光谱体系对方法进行了检验，展示了最小一乘法在分析化学计量学中实际应用的可行性。     

用手性高效液相色谱对β—羟基酯化合物进行对映体分离

本文利用手性ＯＤ柱在高效液相色谱上对光活性β－羟基酯类化合物进行了对映体分离，达到了较好的分离效果，并通过讨论手性ＯＤ涂附物的结构与该类化合物的作用方式，解释了不同的该类化合物的色谱分离效果。     

Photophysics of monodisperse platinum-acetylide oligomers: delocalization in the singlet and triplet excited states

A series of monodisperse Pt-acetylide polymers that contain the [-CC-(p-C6H4)-CC-(t-Pt(PBu3)2)-]n repeat unit has been prepared for n = 1, 2, 3, 4, 5, and 7. The photophysical properties of the series provide information concerning the relationship between the oligomer length and delocalization in the singlet and triplet excited states of the pi-conjugated electron system. The results imply that the singlet excited state is delocalized over approximately 6 repeat units; however, the triplet state is considerably more localized. The triplet energy is almost invariant with oligomer length, but the phosphorescence spectra and triplet nonradiative decay rates indicate that the electron-vibrational coupling in the triplet state decreases with increasing oligomer length.     

稀土变质热锻模具铸钢高温磨损性能的研究

研究了稀土（RE）变质热锻模具铸钢的高温磨损性能，并与热锻模具钢H13钢和3Cr2W8V钢进行对比，探讨了稀土元素的作用和热锻模具铸钢的高温磨损机理。结果表明：随着RE加入量的增加，热锻模具铸钢的磨损率先减后增，RE加入量在质量分数为0．05％时热锻模具铸钢具有最佳的高温磨损性能。RE变质热锻模其铸钢的高温耐磨性明最高于H13钢和3Cr2W8V钢。高温磨损机理为氧化磨损和氧化物的疲劳剥落，磨屑为块状的Fe2O3和Fe3O4。