Diode-pumped Pr<Superscript>3+</Superscript>:YAlO<Subscript>3</Subscript>/LBO violet laser at 374 nm

We report a diode-pumped Pr³⁺:YAlO₃ laser emitting at 747 nm. A power of 232 mW at 747 nm has been achieved in continuous-wave operation with a diode emitting 2 W at 448 nm. Furthermore, intracavity second-harmonic generation in continuous-wave mode has also been demonstrated with a power of 52 mW at 374 nm by using a LBO nonlinear crystal. The fluctuation of the violet output power was better than 2.3%. The beam quality M ² value is 2.2.     

A carbon–LiFePO<Subscript>4</Subscript> nanocomposite as high-performance cathode material for lithium-ion batteries

A cathode material of an electrically conducting carbon–LiFePO₄ nanocomposite is synthesized by wet ball milling and spray drying of precursor powders prior to a solid-state reaction. The structural characterization shows that the composite is composed of LiFePO₄ crystals and 4.8 wt.% amorphous carbon. Galvanostatic charge/discharge measurements indicate that the composite exhibits a superior high energy and high cycling stability. This composite delivers a discharge capacity of 159.1 mAh g⁻¹ at 0.1 C, 150.8 mAh g⁻¹ at 1 C, and 140.1 mAh g⁻¹ at 2 C rate. The capacity retention of 99% is achieved after 200 cycles at 2 C. The 18,650 cylindrical batteries are assembled using the composite as cathode materials and demonstrate the capacity of 1,400 mAh and the capacity retention of 97% after 100 cycles at 1 C. These results reveal that the as-prepared LiFePO₄–carbon composite is one of the promising cathode materials for high-performance, advanced lithium-ion batteries directed to the hybrid electric vehicle and pure electric vehicle markets.     

Efficient and compact intracavity-frequency-doubled Nd:LuVO<Subscript>4</Subscript>/LBO laser at 538 nm end-pumped by a fiber-coupled laser diode

We report a diode-pumped Nd:LuVO₄ laser emitting at 1076 nm, based on the ⁴ F _3/2−⁴ I _11/2 transition, generally used for a 1066 nm emission. A power of 689 mW at 1076 nm has been achieved in continuous-wave (CW) operation with a fiber-coupled laser diode emitting 17.8 W at 809 nm. Intracavity second-harmonic generation (SHG) in CW mode has also been demonstrated with a power of 105 mW at 538 nm by using a LiB₃O₅ (LBO) nonlinear crystal.     

Photonic generation of microwave signals using dual-wavelength single-longitudinal-mode fiber lasers

Photonic generation of microwave signals is demonstrated with a dual-wavelength single-longitudinal-mode erbium-doped fiber ring laser. Microwave signal with a frequency of 21.07 GHz is obtained by aligning the reflection band of a uniform fiber Bragg grating to the two transmission peaks within a fiber Bragg grating-based Fabry-Perot filter. Stable dual-wavelength single-longitudinal-mode operation is guaranteed by means of the combined filtering effect of a saturable absorber and the Fabry-Perot filter. This approach provides an effective solution to the photonic generation of high-frequency microwave signals.     

大口径高性能激光钕玻璃研究进展

在概述国内外高功率激光钕玻璃的发展及其主要性质的基础上,重点论述了上海光学精密机械研究所在大口径N31高功率激光钕玻璃半连续熔炼工艺、连续熔炼工艺、包边工艺等方面的研究进展。报道了半连续熔炼工艺制备的不同Nd2O3浓度N31钕玻璃的光吸收损耗和荧光寿命及小信号增益系数,并给出了这些钕玻璃坯片小信号增益系数的波动范围。通过对半连续熔炼和连续熔炼工艺制备的N31激光钕玻璃主要性能的比较,证明连续熔炼工艺制备的N31钕玻璃的主要性能指标与半连续熔炼的性能相当。对于400 mm大口径N31钕玻璃坯片的包边进行了模拟考核,结果表明,采用现有包边工艺的钕玻璃可以承受1 000次高功率氙灯辐射。     

~6Li原子跃迁频率和超精细分裂的精密测量

本文实现了可用于锂原子频率精密测量的冷原子系统,获得了大数目的原子样品;利用西西弗斯冷却和速度选择相干布居俘获实现了~6Li的冷原子的灰色黏胶冷却,原子的温度被冷却到多普勒冷却极限以下,达到50μK;利用光学频率梳,实验上测量了D1线的跃迁频率和超精细分裂,测量结果和理论计算相接近,可以和目前最精确的测量相比较.这些测量为进一步的轻质量原子频率的精密测量、α常数以及核半径的精确标定打下了基础.     

Investigation of the near-threshold cluster resonance in ~(14)C

An experiment for p(~(14)C,~(14)C~*→~(10)Be+α)p inelastic excitation and decay was performed in inverse kinematics at a beam energy of 25.3 Me V/u.A series of~(14)C excited states,including a new one at 18.3(1)Me V,were observed which decay to various states of the final nucleus of~(10)Be.A specially designed telescope system,installed around zero degrees,played an essential role in detecting the resonant states near theα-separation threshold.A state at 14.1(1)Me V is clearly identified,being consistent with the predicted band-head of the molecular rotational band characterized by theπ-bond linear chain configuration.Further clarification of the properties of this exotic state is suggested by using appropriate reaction tools.     

基于微通道板的中子探测器γ射线灵敏度

研制了一种基于微通道板的超快脉冲中子探测器,对其γ射线灵敏度进行了理论和实验研究。建立了探测器的γ射线灵敏度理论计算模型,利用蒙特卡罗方法模拟计算了不同能量γ射线在不同厚度聚乙烯靶中产生的出射电子能谱和出射角度分布,并结合经验公式计算了单个电子在微通道板(MCP)孔道中产生的二次电子产额,最后得到了探测器的γ射线灵敏度,结果表明当聚乙烯靶厚度大于某一值时,γ射线灵敏度基本相同。利用西北核技术研究所的标准γ射线放射源对探测器的γ射线灵敏度进行了实验标定,实验结果与理论计算结果一致。     

纳米结构泡沫金冲击响应的分子动力学模拟

采用分子动力学计算程序对纳米结构泡沫金(Au)的冲击响应进行了模拟,得到了不同疏松度条件下泡沫Au的冲击压缩特性。通过获取不同势函数条件下实密Au的冲击Hugoniot关系以及泡沫结构稳定性测试选取适合描述Au泡沫冲击过程中原子的相互作用势。采用密堆积球壳的方式建立泡沫Au的初始构型。通过改变空心球壳的尺寸得到不同疏松度的稳定的泡沫Au结构。对泡沫Au的冲击过程进行分子动力学模拟,获得了不同疏松度泡沫Au在不同冲击压缩强度下的热力学状态参数。将模拟结果与已有的状态方程数据库以及疏松物质冲击压缩模型进行比较,结果表明,计算和理论模型给出的结果仍然存在明显的差异性,亟需通过进一步实验研究来验证模拟计算和理论模型结果的可靠性。     

纳秒级前沿PFN-MARX发生器充放电特性

为了改善脉冲形成网络(PFN)-Marx发生器的输出波形,得到前沿较短、纹波因数尽可能小的输出波形,对单级PFN的特性进了仿真研究,包括PFN中末端电容、末端电感、PFN的阻抗等因素对单级PFN的输出波形的影响;建立了PFN-Marx发生器的整体仿真模型,并对采用耦合电感作为隔离电感和采用分立电感作为隔离电感进行了仿真研究。研究表明：采用耦合电感作为隔离电感可以使各级PFN的充电波形更加一致,效果更好。搭建了一个小型的PFN-Marx发生器,并研究了PFN-Marx发生器中气体开关在不同气压下导通时输出波形的差异,结果表明,升高气压有利于减小PFN-Marx发生器输出波形的前沿持续时间。