Preparation of AgBiVMoO/-Al2O3 Catalysts for the Partial Oxidation of Propane

A novel mixed sol method was developed for the preparation of supported catalysts. Analyses by means of XRD and BET show that a 40%AgBiVMoO/γ-Al2O3 catalyst prepared by this method possessed high specific surface area and high dispersion of the active phase. As a result, high acrylic acid selectivity of 8.5% was obtained when the catalyst was used in the reaction of propane partial oxidation to acrylic acid in a fixed-bed reactor.     

Cyanex 923-H2SO4体系萃取第3相的形成和应用

三相体系;Cyanex 923-H2SO4体系萃取第3相的形成和应用     

SUPER TOUGH GELS WITH A DOUBLE NETWORK STRUCTURE

 Living tissues work with fantastic functions in soft and wet gel-like state. Thus, hydrogels have attracted much attention as excellent soft & wet materials, suitable for making artificial organs for medical treatments.However, conventional hydrogels are mechanically too weak for practical uses. We have created double network (DN) hydrogels with extremely high mechanical strength in order to overcome this problem. DN gels are interpenetrating network (IPN) hydrogels consisting of rigid polyelectrolyte and soft neutral polymer. Their excellent mechanical properties cannot be explained by the standard fracture theories. In this paper, we discuss about the toughening mechanism of DN gels in accordance with their characteristic behavior, such as large hysteresis and necking phenomenon. We also describe the results on tissue engineering application of DN gels.     

La传感器在测定铝液凝固过程中La活度研究

微量稀土加入铝或铝合金中，如果加入方法、数量、时间得当，可明显改善材料的多项性能．稀土对铝及铝合金的影响规律和作用机理，已取得了一些进展，但对稀土铝合金的热力学性质，尤其是溶解态稀土的研究少有报导［‘，2］．本工作采用L即．95C。。。。FZ。。多晶作为固体电解     

聚合物-金属纳米复合材料的制备与应用

综述了聚合物-金属纳米复合材料的制备方法，包括原位形成法、沉积法、离子注入法、辐射化学法、光照化学法、直接分散法、球磨法；介绍了聚合物．金属纳米复合材料的应用领域，最后展望了这种材料的发展前景。     

毛细管离子交换电色谱的分离行为

在离子交换毛细管色谱柱上实施电色谱，并对其分离行为进行了研究，采用７５μｍ（ｉ．ｄ．）２０ｃｍ的毛细管强阳离子交换柱（３μｍ）以ＮａＨ２ＰＯ４－Ｈ３ＰＯ４缓冲液为淋洗剂，紫外柱上检测（２１４ｎｍ）考察了流动相的ｐＨ值，有机改性剂及分离电压等因素对分离的影响，研究表明，不同的ｐＨ溶质的流出次序发生改变，随着有机改性剂含量增加，溶质的保留时间减小，而电渗流却增大，同时，对分离的柱效和方法的重现性进行了     

Deposition of Layer－by－layer Inorganic－organic Nano－hybrid Ultrathin Films onto SBA－15

Deposition of inorganic-organic nano-hybrid ultrathin films onto mesoporous silicate materials has been proven possible by using layer-by-layer assembly method. In combination with sol-gel method, titania, subsequently dye molecules (or polymer) were successfully fabricated onto the inner wall of SBA-15. Their structures were preliminarily characterized by FTIR and solid-state UV-Vis spectroscopy, thermal analysis, and BET surface area measurements,respectively.     

一种主链含非线性光学活性基团聚合物的合成

把非线性光学(NLO)发色基团引入到聚合物主链中,既可以增大聚合物中NLO基团的含量,从而提高聚合物的宏观NLO系数,又能够提高NLO聚合物的极化稳定性。本文报道一种由酚酞环氧树脂(PPh)与对硝基苯胺(NA)得到的NLO聚合物的合成及其极化松弛。 所用酚酞环氧树脂系自制,环氧值0.427。对硝基苯胺北京化工厂产,分析纯。N,N-二甲基甲酰胺为中国医药公司售品,化学纯,用前减压蒸馏精制,乙醇、丙酮均为北京化工厂生产,分析纯。在氮气保护下将等当量的PPh与NA溶于DMF中于150℃反应6～8小时后,倒     

溶液酸度和反应温度对CaMoO4薄膜电化学制备的影响

本工作研究了恒电流电化学技术制备CaMoO₄薄膜工艺中，溶液酸度和反应温度对薄膜形成的影响。结果表明，酸度会影响薄膜的生长时间和光致发光特性，在较低酸度沉积薄膜时，容易造成薄膜的团簇生长和不确定相的形成；适当升高反应温度会加快晶粒的生长、提高薄膜的纯度、增加薄膜发射光谱的相对强度。在CaMoO₄薄膜电化学制备工艺中，溶液pH值控制在12.0附近和反应温度控制在60 ℃的左右比较好。     

毛细管电泳法快速分离和检测肠毒性大肠杆菌

 建立了快速分离和检测引起仔猪腹泻的肠毒性大肠杆菌K88、K99和 987P细菌细胞的毛细管区带电泳方法 ,并进行了腹泻仔猪粪便中肠毒性大肠杆菌的应用检测分析。结果表明 ,在电泳缓冲液为 0 0 5mol/LNa2 CO3 NaHCO3(pH 9 9)、分离电压为 1 4 1kV、检测波长为 2 1 0nm的电泳条件下 ,E coliK88、K99和 987P的细胞分别具有单一、稳定的特征谱峰 ,其保留时间的相对标准偏差RSD≤ 0 9% ;在确定的实验条件下 ,实现了腹泻仔猪粪便中肠毒性大肠杆菌的快速检测分析 ,发现将出生 5d～ 6d的腹泻仔猪粪便引入培养基中增殖后主要检出K88。