聚苯硫醚熔体的压致凝固行为

采用施加压力的方法将聚苯硫醚熔体凝固,凝固后获得的聚苯硫醚样品经过降温和卸压后在常温常压下回收. X射线衍射和差示扫描量热分析表明:约20 ms时间的快速压缩过程可以抑制熔体结晶,制备出非晶态聚苯硫醚块材,样品的表面及中心都是非晶态.非晶态聚苯硫醚的玻璃化转变温度和晶化温度分别为318和362 K.常压下的退火实验表明,非晶态聚苯硫醚在425 K等温结晶的产物为正交相晶型.压致凝固法中熔体的凝固不是靠温度变化,而是靠压力变化,样品表面和内部处在一致的温度下同时受压凝固,避免了热传导对非晶尺寸的影响,因此非常有利于获得结构均匀的大尺寸非晶态材料.     

A Sm(III) Coordination Polymer Containing 2,5-Furandicarboxylic Acid: Crystal Structure and Recognition of Oxalate in Water

Crystallography Reports - The {[Sm2(FDC)2](FDC) · 10H2O}n complex, where H2FDC is a 2,5-furandicarboxylic acid, has been prepared by hydrothermal reaction and structurally characterized by...     

Entropic uncertainty relation of a qubit-qutrit Heisenberg spin model and its steering

We investigate the quantum-memory-assisted entropic uncertainty relation (QMA-EUR) in a Heisenberg XYZ mixed-spin (1/2, 1) model. Coupling strength, Dzyaloshinskii-Moriya (DM) interaction and inhomogeneous magnetic field, respectively, contributing to QMA-EUR by a thermal entanglement in the hybrid-spin model are studied in detail. Furthermore, we compare the uncertainty of the bipartite hybrid model with those of qubit-qubit and qutrit-qutrit systems. Meanwhile, the effects of local PT-symmetric operation and weak measurement on the steering of entropic uncertainty are analyzed. We find that the local PT-symmetric operation can reduce the entropic uncertainty, and the entropic uncertainty can also be decreased by weak measurement reversal.     

Investigation of active-region doping on InAs/GaSb long wave infrared detectors

The eight-band κ·p model is used to establish the energy band structure model of the type-II InAs/GaSb superlattice detectors with a cut-off wavelength of 10.5μm,and the best composition of M-structure in this type of device is calculated theoretically.In addition,we have also experimented on the devices designed with the best performance to investigate the effect of the active region p-type doping temperature on the quantum efficiency of the device.The results show that the modest active region doping temperature(Be:760℃)can improve the quantum efficiency of the device with the best performance,while excessive doping(Be:>760℃)is not conducive to improving the photo response.With the best designed structure and an appropriate doping concentration,a maximum quantum efficiency of 45% is achieved with a resistance-area product of 688?·cm^2,corresponding to a maximum detectivity of 7.35×10^11cm·Hz^1/2/W.     

An improved evaluation of the neutron background in the PandaX-Ⅱ experiment

In dark matter direct detection experiments,neutron is a serious source of background,which can mimic the dark matter-nucleus scattering signals.In this paper,we present an improved evaluation of the neutron background in the PandaX-II dark matter experiment by a novel approach.Instead of fully relying on the Monte Carlo simulation,the overall neutron background is determined from the neutron-induced high energy signals in the data.In addition,the probability of producing a dark-matter-like background per neutron is evaluated with a complete Monte Carlo generator,where the correlated emission of neutron(s)andγ(s)in the(α,n)reactions and spontaneous fissions is taken into consideration.With this method,the neutron backgrounds in the Run 9(26-ton-day)and Run 10(28-ton-day)data sets of PandaX-II are estimated to be(0.66±0.24)and(0.47±0.25)events,respectively.     

AlxGa1−xAs LPE growth

Al_xGa_1−xAs LPE growth was studied within the temperature range of 930–900°C with Al concentrations in solutions from 0.04 to 2.4 at.%. AlAs concentration in layers has been shown to grow with the cooling rate increase of solution. Interface and volume nucleation parameter dependence of K_i and K_v and formation time t_f on Al concentration in Ga solution have been found. Addition of Al to Ga solution increases critical values of As supersaturation (supercooling) and, as a result, increase in thickness of Al_xGa_1−xAs layers compared with GaAs layers have been determined in spite of As concentration lowering in Ga solution.     

Affinity foam fractionation of Trichoderma cellulase

Cellulase could not be selectively collected from fermentation broth by simple foam fractionation, because of the presence of other more surface-active compounds. A new approach of affinity foam fractionation was investigated for improvement. A hardwood hydrolysate (containing cellulose oligomers, substrates to cellulase) and two substrate analogs, i.e., carboxymethyl cellulose (CMC) and xylan hydrolysate, were added before the foaming process. The substrates and substrate analogs were indeed found to bind the cellulase selectively and form more hydrophobic complexes that partition more readily onto bubble surfaces. In this study, the effects of the type and concentration of substrate/analog as well as the presence of cells at different growth stages were examined. The foam fractionation properties evaluated included foaming speed, foam stability, foamate volume, and enrichment of filter paper unit (FPU) and individual cellulase components (i.e., endoglucanases, exoglucanases, and β-glucosidases). Depending on the broth and substrate/analog employed, the foamate FPU could be more than fourfold higher than the starting broth FPU. Addition of substrate/analog also deterred the enrichment of other extracellular proteins, resulting in the desired cellulase purification in the foamate. The value of E/P (enzyme activity-FPU/g/L of proteins) in the foamate reached as high as 18, from a lactose-based fermentation broth with original E/P of 5.6. Among cellulase components, exoglucanases were enriched the most and β-glucosidases the least. The study with CMC of different molecular weights (MW) and degrees of substitution (DS) indicated that the CMC with low DS and high MW performed better in cellulase foam fractionation.     

Soft‐Chemical Exfoliation Route to Layered Cobalt Oxide Monolayers and Its Application for Film Deposition and Nanoparticle Synthesis

A colloidal suspension of exfoliated, layered cobalt oxide nanosheets has been synthesized through the intercalation of quaternary tetramethylammonium ions into protonated lithium cobalt oxide. According to atomic force microscopy, exfoliated nanosheets of layered cobalt oxide show a plateau‐like height profile with nanometer‐level height, underscoring the formation of unilamellar 2D nanosheets. The exfoliation of layered cobalt oxide was cross‐confirmed by X‐ray diffraction, UV/Vis spectroscopy, and transmission electron microscopy. The maintenance of the hexagonal in‐plane structure of the cobalt oxide lattice after the exfoliation process was evidenced by selected‐area electron diffraction and Co K‐edge X‐ray absorption near‐edge structure analysis. The zeta‐potential measurements clearly demonstrated the negative surface charge of cobalt oxide nanosheets. Adopting the nanosheets of layered cobalt oxide as a precursor, we were able to prepare the monodisperse CoO nanocrystals with a particle size of ≈10 nm as well as the heterolayered film composed of cobalt oxide monolayer and polycation.     

Calculations of LPE layer thickness

Three basic cases of LPE growth with and without nucleation were examined. The expressions for layer thickness and growth efficiency calculations were developed. Criteria for LPE growth classification were obtained. It was shown the nucleation takes place at critical values of supersaturation of the solution. The values of critical supersaturation may be calculated from growth efficiency experimental data for LPE growth.     

SQUID用于铍材残余应力检测的计算机模拟

依据SMM-601型超导量子干涉显微镜检测部分构建计算模型,采用电磁场有限元方法分析了残余应力引起的非磁性金属材料铍电导率变化对超导量子干涉仪(SQUID)检测信号的影响,并讨论了该方法实际应用于非磁性金属材料残余应力检测的条件和可能性。