热声发动机的CFD数值模拟

采用计算流体动力学(CFD)方法,对高频驻波热声发动机和热声斯特林发动机实验系统分别进行了二维和三维数值模拟。计算模型具有与实验系统相同的几何结构、尺寸和运行工况。对计算模型的有效性进行了研究,表明实现有限换热条件的板叠实物模型适合驻波热声发动机的模拟,而实现局域热平衡的多孔介质模型适合热声斯特林发动机的模拟。计算结果成功观测到了非线性的自激振荡演化过程,捕捉到了两种发动机的不同非线性现象。计算结果分别给出了两种热声发动机内部的声场分布特性和复杂流场。计算结果与实验结果的对比验证了CFD方法对高频驻波热声发动机和热声斯特林发动机模拟的有效性。     

(Sb2Te3)0.75(1－x)(Bi2Te3)0.25(1－x)(Sb2Se3)x机械合金化粉体的制备及其冷压烧结样品的热电性能研究

采用机械合金化法制备了p型赝三元(Sb₂Te₃-Bi₂Te₃-Sb₂Se₃)合金粉体，对其进行XRD分析表明Te，Bi，Sb，Se单质粉末，经100h球磨后实现了合金化；SEM分析表明所得机械合金化粉体材料颗粒均匀、细小，颗粒尺寸在10nm到100nm量级.使用这种粉体制备了冷压烧结块体样品，在室温下测量了温差电动势率(α)和电导率(σ)，研究了烧结温度对材料热电性能的影响，结果表明在低于300℃的烧结温区，样品室温下的热电性能随烧结温度的升高不断提高，功率因子(α²σ)由未烧结样品的0.59μW cm^-1K^-2升高到在300℃下烧结样品的15.9μW cm^-1K^-2，这一结果对确定材料的最佳烧结温度具有重要意义. 关键词： 赝三元热电材料 机械合金化 冷压 烧结     

纤锌矿相GaN空穴输运特性的Monte Carlo模拟研究

用全带多粒子Monte Carlo方法模拟纤锌矿相(Wurtzite)GaN空穴输运特性的结果. 用经验赝势法计算得到能带结构数据. 模拟包含了声学声子散射，光学声子散射，极性光学声子散射，压电散射，电离杂质散射及带间散射等散射机理. 计算得到了空穴沿3个主要对称方向上的空穴平均漂移速度和平均能量与电场强度的关系曲线，室温下漂移速度呈现饱和特性. 在所研究的电场范围内，最大平均漂移速度约为6×10⁶cm s^-1，最大空穴平均能量约为0.12eV, 这些值均比电子的相应参数低很多. 还给出了空穴的扩散迁移率与杂质浓度关系的模拟结果. 关键词： 蒙特卡罗 氮化镓 输运特性 能带结构     

Long-Term Expression of Human Factor Ⅸ cDNA in Rabbits

In this study, rabbits were used as a model for gene therapy for hemophilia B, Human factor Ⅸ cDNA was transferred to cultured normal rabbit skin fibroblasts (RSF) by a recombinant plasmid (pCMVIX) or retrovirus(XL-IX or N2CMVIX) constructed in our laboratoy. Infected fibroblasts capable of synthesizing and secreting high levels of biologically active human factor Ⅸ protein were selected and embedded in a collagen matrix. The latter was surgically implanted into rabbits as autografts or allografts. Human factor Ⅸ protein was detected in the plasma of all the grafted rabbits, and its expression has been maintained for more than 10 months at the time of writing. In addition, we have improved and simplified the method of implantation from surgically grafting the tissue-like matrix to the injection of the infected cell-collagen mixture subcutaneously. Using the latter method, human factor Ⅸ in rabbits injected with RSF-N2CMVIX reached a peak of 480 ng/ml plasma, and its expression has continued for more     

A multichannel thiacalix[4]arene-based fluorescent chemosensor for Zn2+, F− ions and imaging of living cells

Abstract

The fluorescent sensor (3) based on the 1,3-alternate conformation of the thiacalix[4]arene bearing the coumarin fluorophore, appended via an imino group, has been synthesised. Sensing properties were evaluated in terms of a colorimetric and fluorescence sensor for Zn²⁺ and F^?. High selectivity and excellent sensitivity were exhibited, and ‘off-on’ optical behaviour in different media was observed. All changes were visible to the naked eye, whilst the presence of the Zn²⁺ and F^? induces fluorescence enhancement and the formation of a 1:1 complex with 3. In addition, 3 exhibits low cytotoxicity and good cell permeability and can readily be employed for assessing the change of intracellular levels of Zn²⁺ and F^?.     

Synthesis, characteristic and theoretical investigation of the structure, electronic properties and second-order nonlinearity of salicylaldehyde Schiff base and their derivatives

A series of asymmetric donor-acceptor substituted salen-type Schiff-bases have been synthesized and their structures, electronic properties and second order nonlinearities were investigated by DFT methods. In order to verify the stable of these Schiff-base derivates, the IR spectrum of these Schiff-base derivates were calculated, the result showed that these compounds are stable. The results of TD-DFT calculation indicate that the derivatives with the electron-donating group (CH3, OCH3 or N(C2H5)2) have a red shift absorption compared to derivatives with the electron-withdrawing group (NO2). The analysis of MOS indicates that the CN group has contribution to the LUMO orbital while the groups of OCH3, N(C2H5)2 and NO2 have contribution to the HOMO orbital. OCH3, N(C2H5)2 as electron rich groups, made the derivates have a larger first static hyperpolarizability. However, the compound (II) with a NO2 substituent, also has a large first static hyperpolarizability. This is probably because of the special transition model, namely the values of two oscillator strength f (fHOMO-1-LUMO=0.405, fHOMO-LUMO=0.321) are almost equal. In order to understand the influence of the energy gap (ΔE) between the HOMO and the LUMO orbitals on the first static hyperpolarizability, we calculated the energy gap (ΔE) of all Schiff-base compounds. The results show that the smaller the HOMO-LUMO energy gap is, the larger the first static hyperpolarizability is.     

测定高分子聚合物-金属配合物稳定常数及平均配位数的新方法

建立了基于化学平衡理论模型以及凝胶过滤色谱(GFC)-电感耦合等离子体质谱(ICPMS)联用技术的高分子聚合物-金属配合物稳定常数、平均配位数测定新方法。以聚乙烯亚胺(PEI)和Cu2+为例,对形成的PEI-Cu配合物稳定常数、平均配位数进行测定,以0.02 mol·L-1 HAc-NaAc为流动相,凝胶色谱柱分离大分子PEI-Cu配合物以及Cu的小分子配合物、游离态离子,最后用ICPMS测定不同形态金属元素的浓度;利用建立的化学平衡理论模型,计算PEI与金属离子形成配合物的稳定常数、平均配位数,测得25℃,pH4.1~5.3时,PEI-Cu配合物稳定常数为109.6~1010.7,平均配位数为1.0~1.3。建立的在线分离、测定方法具有快速、准确的特点,为高分子聚合物-金属配合物的研究提供新的技术手段。     

铊胁迫水稻的电感耦合等离子体质谱及原位红外光谱分析

采用电感耦合等离子体质谱分析铊胁迫水稻中的Tl、Cr、Co、Ni、Cu、Zn、Mo、Ag、Cd及Pb等重金属元素,并利用原位衰减全反射红外光谱分析了水稻活体叶片的光谱特征。结果表明,铊在水稻叶茎中的含量显著高于谷粒。铊会影响水稻对其它元素吸收,并且在叶与种子中不同元素的吸收积累规律存在差异。水稻叶片的原位衰减全反射红外光谱进一步显示,铊胁迫下叶片的CO2消耗速率明显减少,表明叶片的光合作用受到一定抑制。利用原位衰减全反射红外光谱可直观表现重金属铊对水稻生理过程的胁迫作用。     

TEMPO调控下的苯乙烯光聚合

在UV光照射下, 以Irgacure 1103/TEMPO为引发剂, 实现了苯乙烯的低温光引发可控聚合, 得到了低分散性的聚苯乙烯. 与热引发聚合相比较, 光聚合的反应条件更温和, 聚合速率更快. 探讨了聚合体系中光引发剂及光强等因素的影响, 实现了光聚合产物的扩链反应.     

用多维NMR谱和圆二色CD光谱研究蛋白质亲环素A的结构稳定性

The structural stability of cyclophilin A （CypA） was investigated using H/D exchange and temperature coefficients of chemical shifts of amide protons, monitored by 213 heteronuclear NMR spectroscopy. Amide proton exchange rates were measured by H/D exchange experiments for slow-exchange protons and measured by SEA （Solvent Exposed Amides）-HSQC experiments for fast-exchange protons. Temperature coefficients of chemical shifts and hydrogen exchange rates of amide protons show reasonably good correlation with the protein structure. Totally, 44 out of 153 non-proline assigned residues still exist in 86 d of hydrogen-deuterium exchange at 4 ℃, suggesting that CypA structure should be highly stable. Residues in secondary structures of α2, β1, β2, β5, β6 and β7 might constitute the hydrophobic core of the protein. The change in free energy of unfolding （ △Gu^H2O ） of CypA was estimated to be （21.99± 1.53） kJ·mol^-1 by circular dichroism （CD）. The large free energy change is also an indicator of the high structural stability.