基于三种调制模式下的turbo码光无线通信系统分析

从分析大气对光无线通信系统的影响出发,研究了大气信道特性,建立了大气信道信噪比和能见度的关系.为降低系统误码率,提出了基于OOK、BPSK、BPPM三种调制模式的turbo码的编码方案,推导出三种不同方案对应的turbo码迭代MAP算法.应用建立的信噪比关系,分析和计算了基于三种不同方案的系统的误码率.结果表明,基于BPSK的turbo码系统比OOK和BPPM系统的信噪比降低约3dB,且在高的信噪比情况下,BPSK系统能显著降低系统的误码率.因此,基于BPSK的turbo码方案较适合光无线通信系统.     

光学仪器照明CAD软件设计

设计了一套照明CAD软件用于实现对光学仪器中照明光路照度分布模拟.对该照明CAD系统的光线追迹与光照度计算方法进行了理论探讨,其中在光照度计算方法中引入了线性同余组合发生器,大大提高了模拟的真实性.运用该软件对实际照明光路进行了分析,分析结果表明该软件获得了需要的照度分布模拟图,能较好地满足用户要求.     

Electrical Characterization of Metal-Insulator-Metal Capacitors with Atomic-Layer-Deposited HfO2 Dielectrics for Radio Frequency Integrated Circuit Application

Metal-insulator-metal （MIM） capacitors with atomic-layer-deposited HfO2 dielectric and TaN electrodes are investigated for rf integrated circuit applications. For 12nm HfO2, the fabricated capacitor exhibits a high capacitance density of 15.5fF/μm2 at 100kHz, a small leakage current density of 6.4 × 10^-9 A/cm^2 at 1.8V and 125℃, a breakdown electric field of 2.6 MV//cm as well as voltage coefficients of capacitance （VCCs） of 2110ppm/V^2 and -824 ppm/V at 100kHz. Further, it is deduced that the conduction mechanism in the high field range is dominated by the Poole-Frenkel emission, and the conduction mechanism in the low field range is possibly related to trap-assisted tunnelling. Finally, comparison of various HfO2 MIM capacitors is present, suggesting that the present MIM capacitor is a promising candidate for future rf integrated circuit application.     

汽车太阳膜的光谱特性分析

用带计算机控制系统的UV-Vis 8500型双光束紫外-可见分光光度计定量测量和分析了市场上某品牌汽车太阳膜的光谱特性。测量分析结果表明：普通膜系列太阳膜透视性能均良好, 隔紫外线效果一般,隔热效果也不理想;防爆膜系列太阳膜隔热效果、隔紫外线效果和透视性均一般;防爆抗磨系列太阳膜隔热效果和透视性均一般, 但隔紫外线效果与其他系列膜比较是最好的;超级前挡膜系列太阳膜透视性能均良好, 隔紫外线效果与隔热效果较好,是综合效果最好的汽车太阳膜。     

硒形态分析研究进展

综述了近年来在硒形态分析的研究领域所取得的进展。主要包括分离检测方法,接口技术, 以及硒形态的结构分析的最新发展状况,并且介绍了硒形态分析中各种样品的前处理方法。     

光助Fenton试剂氧化降解染料直接耐晒黑G的研究

文章研究了影响Fenton试剂氧化降解持久性有机污染物直接耐晒黑G的因素,如光源的选择、初始pH值、H₂O₂的用量、Fe2+的用量、阳离子交换树脂载体的引入等,通过研究确定了各因素的优化条件。研究结果表明：太阳光照能有效的促进直接耐晒黑G染料的降解脱色,大大缩短反应时间;引入阳离子交换树脂后,可增强Fenton氧化反应的活性,降解效果更好。     

WG-Like Modes Selectivity in a Square Cavity with Posts

We investigate the characteristics of Whispering-Gallery（WG）-like modes in a square cavity with posts by employing the two-dimensional （2D） finite-difference time-domain （FDTD） technique combined with the effective index method. The results indicate that the posts can result in mode selection in the WG-like modes. The WG-like modes with odd mode numbers are not much sensitive to the sizes of the posts. However, the quality factor （i.e. Q-factor） of the WG-like modes with even mode numbers decreases sharply with the increasing size of the posts. The decreasing Q-factor is attributed to mode leakage and scattering loss due to the presence of the post. The mode selection increases the mode spacing of square cavity twice in an optimized structure.     

Growth of Indium Nanorods by Magnetron Sputtering

Indium nanorods are grown on silicon substrates by using magnetron-sputtering technique. Film morphologies and nanorod microstructure are investigated by using scanning electron microscopy, high-resolution transmission electron microscopy （HRTEM）, and x-ray diffraction. It is found that the mean diameter of the nanorods ranges from 30nm to 100nm and the height ranges from 30nm to 200nm. The HRTEM investigations show that the indium nanorods are single crystals and grow along the [100] axis. The nanorods grow from the facets near the surface undulation that is caused by compressive stress in the indium grains generated during grain coalescence process. For low melting point and high diffusivity metal, such as bismuth and indium, this spontaneous nanorod growth mechanism can be used to fabricate nanostructures.     

基于Hilbert变换的相空间重建方法在HLS逐束团测量系统中的应用

引入基于Hilbert变换的相空间重建手段, 对合肥光源(HLS)逐束团测量系统采集的数据进行了全面的分析, 其中包括单个束流位置监测器(BPM)数据的相空间重建, 逐圈逐束团振荡相位信息、束团振荡模式信息、逐束团横向工作点(tune值)变换. 提出了新的分析束团tune值的手段, 提供传统方法无可比拟的更高的时间和频率分辨率. 还对不同模式的阻尼率进行了计算, 这为衡量逐束团反馈系统的效果提供了确实可靠的方法.