Systematic investigation of the hydrothermal syntheses of Pr(III)-PDA (PDA = pyridine-2,6-dicarboxylate anion) metal-organic frameworks

A series of novel two-dimensional (2D) and three-dimensional (3D) praseodymium coordination polymers, namely, {[Pr3(PDA)4(HPDA)(H2O)8] x 8H2O}n (2), {[Pr2(PDA)3(H2O)3] x H2O}n (3), {[Pr(PDA)(H2O)4] x ClO4}n (4), and { [Pr2(PDA)2(H2O)5SO4] x 2H2O}n (5) (PDA = pyridine-2,6-dicarboxylic anion), was designed and synthesized under hydrothermal conditions. Complexes 1-3 (chainlike polymer, {[Pr(PDA)(HPDA)(H2O)2] x 4H2O}n (1) was also obtained independently by us, although it has been reported recently by Ghosh et al.) were fabricated successfully by simply tuning the Pr/PDA ratio and exhibited various and intriguing topological structures from a 1D chain to a 3D network. While the synthetic strategy of 5 was triggered and further performed only after 1 was structurally characterized. The complexes were characterized by X-ray single-crystal determination, spectroscopic, and variable-temperature magnetic susceptibility analyses. In complex 2 an unusual nanosized square motif as a building block constructed by eight Pr ions was further assembled into a highly ordered 2D grid compound. In complex 3 the decanuclear Pr metal-based structure as a repeat unit interpenetrated to form a novel 3D polymer. Complex 4 was a 3D network polymer fabricated through a hexanuclear Pr ring as a building block, and ClO4- anions as guests were trapped in the cavity. In complex 5 six Pr atoms, two SO4(2-) anions, and carboxylic oxygen bridges constructed an intriguing rectangle structure as a repeat unit in the grid to form a 2D coordination polymer in which the unique bi-bidentate coordination mode of SO4(2-) anion was observed.     

The spin delocalization substituent parameter σ˙. 7. Meta-substituent effects on the cyclodimerization of trifluorostyrenes. A test for the σ˙JJ approach

Rate constants (k's) of the thermal cyclodimerization of ten meta-substituted trifluorostyrenes (m-Y-TFS's) have been measured in the temperature range 110–160°C. On the basis of these k's and the σ_mb values derived from ¹⁹F NMR data the spin-delocalization substituent constant σ^˙_m values of these ten meta-substituents have been calculated. The averaged σ^˙_m values are: m-Et, 0.09; m-t-Bu, 0.11; m-F, 0.03; m-Cl,?0.05; m-Br, 0.12: m-CF₃, ?0.07; m-OMe, 0.10; m-NO₂, ?0.002; m-CN, 0.11 and m-CO₂Me, 0.08. Both the smallness of these values and the nonexistence of correlation between Hammett-Type polar σ^X and these σ^˙_m values support our belief that the σ_j?J approach is reliable and trustworthy.     

Study on flame-retardant mechanism of polycarbonate containing sulfonate-silsesquioxane-fluoro retardants by TGA and FTIR

The flame retardancy of bisphenol A polycarbonate (PC) containing potassium diphenylsulfone sulfonate (KSS), poly(aminopropyl/phenylsilsesquioxane) (PAPSQ) and poly(vinylidenefluoride) (PVDF) was measured by limited oxygen index (LOI) and examined according to UL94. A high LOI and UL94 V-0 rating for 1.6 mm thickness samples were obtained by a combined use of equivalent KSS, PAPSQ and PVDF at 0.1-0.3 wt% loading, respectively. The improvement in flame retardancy of PC compositions arose from the synergistic interaction of three additives. Thermogravimetric analysis (TGA) indicated that the combination decreased the activation energy (E) of PC degradation and elevated the thermal degradation rate of PC to ensure the formation of an insulating carbon layer. FTIR analysis showed that the LOI char of PC containing the three additives took on a highly cross-linking aromatic ester and ether structure.     

Concise synthesis of ether analogues of lysobisphosphatidic acid

We describe a versatile, efficient method for the preparation of ether analogues of (S,S)-lysobisphosphatidic acid (LBPA) and its enantiomer from (S)-solketal. Phosphorylation of a protected sn-2-O-octadecenyl glyceryl ether with 2-cyanoethyl bis-N,N-diisopropylamino phosphine and subsequent deprotection generated the bisether LBPA analogues. By simply changing the sequence of deprotection steps, we obtained the (R,R)- and (S,S)-enantiomers of 2,2'-bisether LBPA. An ELISA assay with anti-LBPA monoclonal antibodies showed that the bisether LBPAs were recognized with the same affinity as the natural 2,2'-bisoleolyl LBPA. [reaction: see text]     

Palladium-catalyzed tandem cyclization/Suzuki coupling of 1,6-enynes: reaction scope and mechanism

A palldium(0)-catalyzed tandem cyclization/Suzuki coupling reaction of various 1,6-enyne substrates was developed. This Pd-catalyzed enyne cyclization reaction represents a new process for the synthesis of stereodefined alpha-arylmethylene-gamma-butyrolactones, lactams, multifunctional tetrahydrofurans, pyrrolidines, and cyclopentanes. The mechanism of the reaction was studied by the employment of different enyne isomers and boronic acids; a pi-allyl palladium intermediate was suggested to explain the formation of the cyclic products. The stereochemistry of this reaction can be well explained by a chairlike transition state.     

Influence of extended π-conjugation units on carrier mobilities in conducting polymers

Carrier mobilities in thin films of copolymers with repeat units consisting of oligothiophenes bridged by Si atoms are measured over a range of doping levels, where the numbers of thienylenes in the repeat unit are 7, 8, 10, 12, and 14. The mobilities for these polymer films increased with the increase in doping level and the mobility enhancement followed an increasing order of the π-conjugation length. The magnitude of the mobility increase for the Si polymer comprising 14 thiophene units reached ca. 10⁴, implying that this π-conjugation length is almost sufficient to reproduce transport properties of polythiophenes.     

A novel hyperbranched polyester acrylate used for microfabrications

A novel hyperbranched polyester acrylate (HPEA) was synthesized based upon ethylenediamine tetraacetic acid as a “core” molecule, 5‐hydroxyisophthalic acid as an AB₂ monomer, and 2‐hydroxyethyl acrylate as an endcapping reagent. The obtained oligomer has an unsaturation concentration of 4.10 mmol_C?C g^?1 measured by nuclear magnetic resonance and a wide molecular weight distribution of 1.64 measured by gel permeation chromatography. The two‐photon absorption (TPA) photopolymerization of HPEA under the exposure of a Ti : sapphire femtosecond laser with a wavelength of 800 nm was investigated through laser exposure dose‐dependant spatial resolutions of its resins. The TPA photopolymerization thresholds at the range 1.6–4.3 × 10⁷ mJ cm^?2, and exposure dose windows at the range 3.4–4.3 for three formulations were determined. A spatial resolution of 0.85 μm was obtained through the TPA photopolymerization of the formulation containing 1 wt% photoinitiator and 0.3 wt% photoinhibitor. A diffraction grating and real three‐dimensional coupled gear wheel created by TPA photopolymerization were described to demonstrate the unique capability of HPEA in microfabrications. Copyright © 2004 John Wiley & Sons, Ltd.     

Asymmetric dimers can be formed by dewetting half-shells of gold deposited on the surfaces of spherical oxide colloids

Asymmetric dimers consisting of gold microcrystals and spherical silica colloids have been fabricated by depositing thin films of gold onto the spherical colloids to form half-shells, followed by annealing at elevated temperatures. The capability and feasibility of this procedure have been demonstrated with silica and titania beads of 0.2-2 mum in diameter and gamma-Fe2O3/polystyrene@SiO2 core-shell particles 0.5 mum in size. The dimensions of gold microcrystals could be conveniently varied in the range of 100-650 nm by controlling the thickness of gold films and/or the diameter of the spherical colloids. This method provides another route to asymmetric dimers made of colloidal particles that could be different in size, chemical composition, surface functionality, density or sign of surface charge, bulk property, or a combination of these properties.     

Two New Xanthone Glycosides from Polygala tenuifolia

Two new xanthone glycosides,polygalaxanthone IV and V were isolated from the roots of Polygala tenuifolia Willd. Their structures were established as 6-O-[α-L-rhamnopyranosyl-(1→2)-β-D-glucopyranosyl]-1-hydroxy-3,7-dimethoxyxanthone(polygalaxanthone IV), and 6-O-[α-L-rhamnopyranosyl-(1→2)-β-D-glucopyranosyl]-1,3-dihydroxyl-7-methoxyxanthone (polyga-laxanthone V),respectively, on the basis of chemical and spectral evidence.     

Determination of atrazine, desethyl atrazine and desisopropyl atrazine in environmental water samples using hollow fiber-protected liquid-phase microextraction and high performance liquid chromatography

A new method based on hollow fiber-protected liquid-phase microextraction (LPME) was developed for the simultaneous determination of atrazine, desethyl atrazine and desisopropyl atrazine in environmental water samples. In LPME, analytes were extracted into 1-octanol immobilized in the micropores of a poly(vinylidene fluoride) porous hollow fiber membrane, and back extracted into the acceptor (4 M HCl) filled in the lumen of the hollow fiber. After LPME, the analytes trapped in the acceptor were analyzed with high-performance liquid chromatography after neutralization. The effect of extraction factors such as sample pH, acceptor pH, salinity, extraction time, stirring rate, and humic acid were studied. Under the optimized conditions, the limits of detection and relative standard deviations were respectively in the range of 0.5–1.0 μg L⁻¹ and 3.9–4.7% (n = 5). The proposed method was applied to determine atrazine, desethyl atrazine and desisopropyl atrazine in wastewater and groundwater samples. The three analytes were below the limits of detection, but good relative spiked recoveries over 90.1 ± 5.9% at 5 μg L⁻¹ spiked level were obtained.