CdTe/CdO nH2O核壳纳米复合粒子的水相合成及光学特性.

"研究了CdTe/CdO?nH2O核壳纳米复合物的水相合成及其光学特性． 以巯基乙酸为稳定剂通过氯化镉和碲氢化钠反应制备了碲化镉纳米晶． 在反应过程中, 反应前驱溶液中镉离子与碲离子的摩尔浓度比对最终制备的碲化镉纳米晶的荧光强度起到了极其重要的作用． 在pH值为8.2, 镉离子与碲离子摩尔浓度比为4.0的情况下,制备出了具有最强荧光强度的碲化镉量子点．之后,CdTe/CdO?nH2O核壳纳米复合物在水相中制备出来．在适当的氢氧化镉沉积在碲化镉纳米粒子表面后,碲化镉量子点的荧光大大增强．所制备的CdTe/C     

Secondary-flow-aided single-train elastic-inertial focusing in low elasticity viscoelastic fluids

Elastic-inertial focusing has attracted increasing interest in recent years due to the three-dimensional (3D) single-train focusing ability it offers. However, multi-train focusing, instead of single-train focusing, was observed in viscoelastic fluids with low elasticity as a result of the competition between inertia effect and viscoelasticity effect. To address this issue, we employed the secondary flow to facilitate single-train elastic-inertial focusing in low elasticity viscoelastic fluids. A three-section contraction-expansion channel was designed to induce the secondary flow to pinch the multiplex focusing trains into a single one exactly at the channel centerline. After demonstrating the focusing process and mechanism in our device, we systematically explored and discussed the effects of particle diameter, operational flow rate, polymer concentration, and channel dimension on particle focusing performances. Our device enables single-train focusing of particles in viscoelastic fluids with low elasticity, and offers advantages of planar single-layer structure, and sheathless, external-field free operation.     

A copper-based coordination polymer formed through synergistic bridging of 1,2,4-triazole and acetate anions: synthesis,crystal structure and magnetic properties

Transition Metal Chemistry - A Cu(II) coordination polymer, [Cu2(pztrz)2(μ-CH3COO)(CH3COO)]·3H2O (1), derived from mono-substituted 1,2,4-triazole derivative 3-(pyrazinyl)-1,2,4-triazole...     

金属氧化物催化剂上合成气转化中羧酸盐物种促进芳烃的生成

芳烃是重要的化工原料,目前主要通过石油催化裂化和催化重整制得.随着石油资源的消耗以及芳烃的需求日益增长,开发非石油路线制备芳烃势在必行.因此,从煤、天然气和生物质出发,经合成气一步制芳烃(STA)广受关注.将合成气制甲醇的金属催化剂和甲醇制芳烃的分子筛催化剂复合,可以制备双功能催化剂,用于合成气反应可高选择性得到芳烃.然而,关于此过程中芳烃的生成机理仍有争论.目前人们认为,生成芳烃的中间体主要分甲醇和其他含氧物种(乙烯酮,醛类)两种.本文以ZnCrAlOx和H-ZSM-5为模型催化剂,进行合成气制芳烃、甲醇制芳烃和丙烯制芳烃反应,确定了传统的甲醇制芳烃路径不是合成气制芳烃中的主要途径,并通过原位傅里叶变换红外光谱和气相色质谱解释了STA反应中两种活性组分距离越近,芳烃选择性越高的原因,从而提出了在合成气制芳烃过程中芳烃的生成机理.通过比较双功能催化剂上合成气、甲醇以及丙烯的反应性能发现,在甲醇和丙烯转化时,其芳烃选择性远小于合成气转化时的,由此可认为,在合成气制芳烃的路径主要不经由传统的甲醇制芳烃,而是通过烯烃聚合脱氢生成芳烃.红外表征和共进料实验表明,合成气可以在金属催化剂表面生成甲酸盐物种,它可与烯烃反应生成羧酸盐物种,再迁移到分子筛上反应生成芳烃,且羧酸盐物种在分子筛上的芳构化能力要高于丙烯;即使在氢气氛围下,当丙烯的芳构化能力受到氢气极大抑制时,羧酸盐物种仍能高选择性生成芳烃.本文制备了一系列金属催化剂和分子筛物理接近距离不同的双功能催化剂,研究了合成气在双功能催化剂上制芳烃时,金属催化剂和分子筛二者组分的距离对芳烃选择性的影响.随着二者接近距离的增加,芳烃选择性急剧增加;通过GC-MS分析合成气转化时的停留物种,发现随着二者接近距离的增加,羧酸盐物种和甲基环戊烯酮的量明显增加,因此,羧酸盐物种和甲基环戊烯酮物种在生成芳烃中起到了重要的作用.综上所述,我们提出了STA中一条新的芳烃生成路径,并证明了羧酸盐物种是其中重要的中间物种.它经由金属表面的甲酸盐物种和烯烃反应生成,随后迁移到分子筛上生成甲基环戊烯酮物种,再脱水生成芳烃.     

Improving the sensitivity of cellulose fiber-based lateral flow assay by incorporating a water-dissolvable polyvinyl alcohol dam

Cellulose - Lateral flow assay (LFA) is an important point-of-care (POC) test platform due to the associated portability, on-site testing, and low cost for diagnosis of pathogen infections and...     

Polyaniline encapsulated silicon nanocomposite as high-performance anode materials for lithium ion batteries

Polyaniline encapsulated silicon (Si/PANI) nanocomposite as anode materials for high-capacity lithium ion batteries has been prepared by an in situ chemical polymerization of aniline monomer in the suspension of Si nanoparticles. The obtained Si/PANI nanocomposite demonstrates a reversible specific capacity of 840 mAh g^?1 after 100 cycles at a rate of 100 mA g^?1 and excellent cycling stability. The enhanced electrochemical performance can be due to that the polyaniline (PANI) matrix offers a continuous electrically conductive network as well as enhances the compatibility of electrode materials and electrolyte as a result of suppressing volume stress of Si during cycles and preventing the agglomeration of Si nanoparticles.     

丙烯酸酯/液晶/POSS复合体系光聚合过程中的体积收缩

采用光-流变学方法研究了丙烯酸酯/液晶复合体系的光聚合凝胶时间及体积收缩率,并与密度法测量的体积收缩率进行了对比.结果表明,该复合体系的凝胶时间小于10 s,光-流变学方法可以在线测量丙烯酸酯单体/液晶复合体系的光聚合体积收缩.以2种不同结构的多面体齐聚倍半硅氧烷(POSS)掺杂丙烯酸酯/液晶复合体系,八甲基丙烯酰氧基倍半硅氧烷(MA-POSS)使丙烯酸酯/液晶复合体系的双键转化率略有降低,掺杂10 wt%MA-POSS使体系的光聚合体积收缩率仅降低了12%;而甲基丙烯酰氧基七异丁基倍半硅氧烷(MI-POSS)对体系双键转化率的影响较小,显著降低了体系的光聚合体积收缩,掺杂10 wt%MI-POSS使体系的光聚合体积收缩率降低29%.     

双核铜配合物Cu2(2,2′-bpy)2(2-bba)4的合成、表征与晶体结构

在室温下,以2-溴苯甲酸和2,2'-联吡啶为配体,通过溶液法在甲醇/水的混合溶剂中反应合成了双核铜(II)配合物Cu2(2,2'-bpy)2(2-bba)4。通过元素分析、红外光谱、热重测试技术和X射线粉末衍射对其进行了结构表征,同时用X射线单晶衍射分析确定了其晶体结构。结果表明,其晶体属正交晶系,空间群为Pbca,晶胞参数:a=20.619(4),b=10.098(2),c=21.865(4),V=4552.5(15)3,Dc=1.808g·cm-3,μ=4.505mm-1,F(000)=2440.0,Z=4,最终残差因子R1=0.0583,wR2=0.1200。配合物为双核结构,每个结构单元中2个Cu(II)离子通过2个2-溴苯甲酸根配体单齿桥联。配合物中的每个Cu(II)离子为五配位的结构,分别和来自2个单齿桥联的2-溴苯甲酸根的2个氧原子、1个单齿配位的2-溴苯甲酸根的1个氧原子及来自1个2,2'-联吡啶的2个氮原子配位形成了畸变的四方锥型结构,分子间则通过弱的C—H…O氢键作用形成了一维链状的结构。CCDC:972827。     

Three dimension Liesegang rings of calcium hydrophosphate in gelatin

Three dimensional Liesegang spherical layers of CaHPO₄ in gelatin ball were performed by employing CaCl₂ and Na₂HPO₄ as the inner and outer electrolyte, respectively. Effects of concentrations of inner and outer electrolyte as well as pH on the morphologies of Liesegang rings (LRs) were investigated. As a result, it was observed that the time law, spacing law and width law found in 1D/2D gel systems were obeyed in this 3D gelatin system. The interaction of Ca²⁺ and HPO₄ ^2? with gelatin matrix played a key role to the formation of LRs due to the existence of carboxylic groups on the gelatin chains. Using Ca²⁺ as the inner electrolyte, LRs were prepared. However, employing HPO₄ ^2? as inner electrolyte, LRs were not obtained. Moreover, pH of gelatin solution greatly impacted on the formation of LRs. The number of LRs increased with the decrease of pH, whereas the width inversely decreased. pH 4.40 was a turn point, from which the spacing coefficient abruptly increased as pH increased. All these results indicated that the network was created by the interaction of Ca²⁺ and –COO^? of gelatin chains, which dominated the formation of CaHPO₄ LRs in gelatin.