Synthesis and structure of substituted 3,4-dihydropyridin-2-ones

The condensation of benzylideneacetonacetic ester with cyanoacetamide in the presence of triethylamine yielded 3-carbamoyl-3,4-dihydropyridin-2-one, while the condensation of arylidenecyanoacetamides with -aminocrotonic ester in acetic acid yielded 3-cyano-3,4-dihydropyridin-2-ones. It was established by NMR spectroscopy that 3-cyano-4-R-5-ethoxycarbonyl-6-methyl-3,4-dihydropyridin-2-ones exist in solutions in the form of a mixture of cis- and trans-stereoisomers in a 101 ratio.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 11, pp. 1504–1508, November, 1984.     

手性双氨基醇-Et2Zn催化的不对称直接羟醛缩合反应

以1,3-二溴丙酮和(2'S)-(二苯基羟甲基)-四氢吡咯为原料,合成了两种新型手性氨基醇1,3-双[(2'S)-(二苯基羟甲基)-1-四氢吡咯基]丙酮(3)和1,3-双[(2'S)-(二苯基羟甲基)-1-四氢吡咯基]-2-丙醇(4),总产率分别为39%和35%.手性双氨基醇3-/4-Et2Zn可催化未修饰醛、酮的不对称直接羟醛缩合反应,对映体过量最高9%.     

110K铋基超导相形成的组成条件

Bi-Sr-Ca-Cu-O超导材料中存在110K和80K2个超导相。其组成是Bi_2Sr_2Ca_2Cu_3O_y和Bi_2Sr_2CaCu_2O。但迄今为止,在按2223组成比合成的未掺杂Bi系超导材料中从未得到过纯的110K相,也未见过组成为2223,零电阻温度在100K以上材料的报道。为了探索形成110K相的最佳条件,本文以2223组成比为参考,合成了5个系列材料:Bi_xSr_2Ca_2Cu_3O_y,Bi_2Sr_xCa_2Cu_3O_y,Bi_2Sr_2Ca_xCu_3O_y,Bi_2Sr_2Ca_2Cu_xO_y,Bi_i Sr_uCa_yCu_wO_s。     

Free radicals in the electrochemical reduction of derivatives of 3,5-dinitro-1,2-dihydropyridine

The characteristics (potentials, limiting currents, reversibility) of the electrochemical reduction of 3,5-dinitro-1,2-dihydropyridines were determined by cyclic voltammetry and polarography. It was established by ESR that the free radicals formed in these processes have a radical-dianion structure in the case of both the N-unsubstituted and the N-substituted dihydropyridines. The hyperfine coupling constants of the interaction between the unpaired electron and the nuclei of the atoms at various positions of the heterocycle were determined.Latvian Institute of Organic Synthesis, Riga LV-1006. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 212–218, February, 1997.     

Ammonolysis of aziridinecarboxylic acid esters

The ammonolysis of 1-(2-methoxycarbonylvinyl)- and 1-(1,2-dimethoxycarbonylvinyl)-2-methoxycarbonylaziridines at normal pressure leads to 1-(2-methoxycarbonylvinyl)-and 1-(1,2-dicarbamoylvinyl)-2-carbamoylaziridines, respectively, whereas 1,3-diazabicyclo[3.1.0]hexan-4-one derivatives are formed under pressure.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 350–352, March, 1983.     

3,3,3-Trifluoro-<Emphasis Type="Italic">N</Emphasis>′-(3-trifluoromethylphenyl)-1,2-propanediamine and its <Emphasis Type="Italic">N</Emphasis>-mono-and <Emphasis Type="Italic">N,N</Emphasis>-dicarboxyethyl derivatives: synthesis,protolytic and complexation properties

3,3,3-Trifluoro-N′-(3-trifluoromethylphenyl)-1,2-propanediamine (5) was synthesized by the reaction of 2-diazo-1,1,1-trifluoro-3-nitropropane or 3,3,3-trifluoro-1-nitropropene with 3-aminobenzotrifluoride followed by the reduction of the nitro group. The Michael 1,4-addition of diamine 5 to acrylic acid occurs only at the N(1) atom and affords N-mono-or N,N-dicarboxyethyl derivatives 6 and 7, depending on the reactant ratio. Protolytic equilibria 5–7 in aqueous solutions were studied by pH-potentiometry and UV spectroscopy. Only the aliphatic amino group can be protonated in an aqueous solution, while the aromatic amino group remains unprotonated even in 12 M HCl. The stability constants of transition metal (Cu²⁺, Ni²⁺, Zn²⁺) complexes with ligands 5–7 were determined by pH-potentiometric titration. The stability of the complexes and selectivity of the ligands toward Cu²⁺ ions increase with an increase in the number of N-carboxyethyl groups. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2465–2469, November, 2005.     

Complexes of Some 3d-Metal Salts with N,N-Dimethylhydrazide of 4-Nitrobenzoic Acid

The [M(HL)₂(H₂O)₂]X₂ complexes were synthesized (M = Mn(II), Co(II), Ni(II), Cu(II), Zn; X = CH₃COO^–, Cl^–, BF₄ ^–) that incorporate bidentately coordinated molecules of N,N-dimethylhydrazide of 4-nitrobenzoic acid (HL). The latter molecules chelate the metal atom through the carbonyl O atom and the N atom of dimethylamino group. The square-planar complexes of Cu and Ni with deprotonated form of a ligand with composition ML₂ were also isolated. The synthesized complexes were studied by IR, electronic and EPR spectroscopies, and by cyclic voltammetry.     

Improving MCM‐41 as a Nitrosamines Trap through a One‐Pot Synthesis

Copper oxide was incorporated into MCM‐41 by a one‐pot synthesis under acidic conditions to prepare a new mesoporous nitrosamines trap for protection of the environment. The resulting composites were characterized by XRD, N₂ adsorption–desorption, and H₂ temperature‐programmed reduction techniques, and their adsorption capabilities were assessed in the gaseous adsorption of N‐nitrosopyrrolidine (NPYR). The adsorption isotherms were consistent with the Freundlich equation. The copper salt was deposited onto MCM‐41 during the evaporation stage and was fixed on the host in the calcination process that followed. MCM‐41 was able to capture NPYR in air below 373 K but not at 453 K. Loading of copper oxide on MCM‐41 greatly improved its adsorption capability at elevated temperatures. The influence of the incorporation of copper into MCM‐41 samples and the adsorption behavior of these samples are discussed in detail.     

Synthesis and alkylation of 4,6-diphenyl-3-thiocarbamoyl-3,4,5,6-tetrahydropyridine-2(1H)-one and 4,6-diphenyl-3-thiocarbamoyl-3,4-dihydropyridine-2(1H)-one

Alkylation of 3-thiocarbamoyl-3,4,5,6-tetrahydropyridine-2(1H)-one with methyl iodide has given 5-methylthio-2,6-diazabicyclo[2.2.2]oct-5-en-3-one and 3-methyl-thiocarbonyl-3,4-dihydropyridine-2(1H)-one. Alkylation of 3-thiocarbamoyl-3,4-dihydridine-2(1H)-one with iodoacetamide affords 3-(1-amino-1-carbamoyl-3,4-methyl-thiomethylene)-1,4-dihydropyridine-2-one, which in acidic media is converted into 3-(4-oxo-3,5-dihydro-1,3-thiazol-2-ylidene)-1,4-dihydropyridine-2-one.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 787–794, June, 1989.     

Ionic limiting molar conductivity calculation of Li-ion battery electrolyte based on mode coupling theory

A method is proposed based on mode coupling theory in which the ion transference number is introduced into the theory. The ionic limiting molar conductivities of LiPF6, LiClO4, LiBF4, LiCF3SO3, Li(CF3SO3)2N, LiC4F9SO3, and LiAsF6 in PC(propylene carbonate), GBL(gamma-butyrolactone), PC(propylene carbonate)/EMC(ethylmethyl carbonate), and PC(propylene carbonate)/DME(dimethoxyethane) are calculated based on this method, which does not involve any adjustable parameter. The results fit well to the literature data which are calculated by an empirically adjusted formula. This presents a potential way to calculate the conductivities of Li-ion battery electrolytes.