隔膜对双电层电容器和混合型电池-超级电容器的电化学性能的影响

隔膜是双电层电容器和混合型电池-超级电容器等电化学储能器件的重要组成元件.本文采用1 mol?L-1四乙基四氟硼酸铵的丙烯碳酸酯电解液制备了基于活性炭的扣式双电层电容器,并采用1 mol?L-1六氟磷酸锂锂离子电解液制备了(LiNi0.5Co0.2Mn0.3O2+活性炭)/石墨体系的混合型电池-超级电容器.研究了不同类型隔膜的物理化学性能,以及其对双电层电容器和混合型电池-超级电容器的电化学性能的影响.四种隔膜分别是无纺布聚丙烯毡、多孔聚丙烯薄膜、Al2O3涂层的聚丙烯薄膜和纤维素纸隔膜.进行了表面形貌、差示扫描量热、电解液吸液量和表观接触角测试表征.电化学测试表明,采用纤维素隔膜的双电层电容器具有最高的比电容和更优的倍率性能,电容器的自放电性能差别不大.而对于混合型电池-超级电容器,采用聚丙烯薄膜和无纺布聚丙烯毡隔膜器件的比容量比其它器件约高20%,且采用纤维素隔膜的器件自放电率最高.     

铝合金表面电偶腐蚀与电子功函数的关系

铝合金中经常会引入一些第二相来改善其性能,第二相由于和铝基体的电位差不同,将会对铝合金的局部腐蚀产生重大的影响.为了揭示铝合金腐蚀的物理本质,本文利用基于密度泛函理论第一性原理的计算方法,详细计算了铝合金中一些主要第二相(Al_2Cu、Al_3Ti和Al_7Cu_2Fe)的多种晶面的电子功函数,分析了电子从各个晶面逸出的难易,求得了第二相与Al基体的本征电势差,我们发现不同的晶面暴露在合金最外层,会显著地影响本征电势差;即便是同一晶面,暴露在最外层的原子种类和构型不同,对腐蚀的影响也不一样.从电子的层面解释了电偶腐蚀发生的原因.     

Palladium‐Catalyzed Decarboxylative Cycloaddition of Vinylethylene Carbonates with Formaldehyde: Enantioselective Construction of Tertiary Vinylglycols

An efficient method for the enantioselective construction of tertiary vinylglycols through a palladium‐catalyzed asymmetric decarboxylative cycloaddition of vinylethylene carbonates with formaldehyde was developed. By using a palladium complex generated in situ from [Pd₂(dba)₃]?CHCl₃ and a phosphoramidite ligand as a catalyst under mild reaction conditions, the process allows conversion of racemic 4‐substituted 4‐vinyl‐1,3‐dioxolan‐2‐ones into the corresponding 1,3‐dioxolanes, as methylene acetal protected tertiary vinylglycols, in high yields with good to excellent enantioselectivities.     

Exceedingly Fast Copper(II)‐Promoted ortho CH Trifluoromethylation of Arenes using TMSCF3

The direct ortho‐trifluoromethylation of arenes, including heteroarenes, with TMSCF₃ has been accomplished by a copper(II)‐promoted C? H activation reaction which completes within 30 minutes. Mechanistic investigations are consistent with the involvement of C? H activation, rather than a simple electrophilic aromatic substitution (S_EAr), as the key step.     

A Bioorthogonal Small‐Molecule‐Switch System for Controlling Protein Function in Live Cells

Chemically induced dimerization (CID) has proven to be a powerful tool for modulating protein interactions. However, the traditional dimerizer rapamycin has limitations in certain in vivo applications because of its slow reversibility and its affinity for endogenous proteins. Described herein is a bioorthogonal system for rapidly reversible CID. A novel dimerizer with synthetic ligand of FKBP′ (SLF′) linked to trimethoprim (TMP). The SLF′ moiety binds to the F36V mutant of FK506‐binding protein (FKBP) and the TMP moiety binds to E. coli dihydrofolate reductase (eDHFR). SLF′‐TMP‐induced heterodimerization of FKBP(F36V) and eDHFR with a dissociation constant of 0.12 μM . Addition of TMP alone was sufficient to rapidly disrupt this heterodimerization. Two examples are presented to demonstrate that this system is an invaluable tool, which can be widely used to rapidly and reversibly control protein function in vivo.     

Gold(I)‐Catalyzed Diazo Coupling: Strategy towards Alkene Formation and Tandem Benzannulation

A gold(I)‐catalyzed cross‐coupling of diazo compounds to afford tetrasubstituted alkenes has been developed by taking advantage of a trivial electronic difference between two diazo substrates. A N‐heterocyclic‐carbene‐derived gold complex is the most effective catalyst for this transformation. Based on this new strategy, a gold(I)‐initiated benzannulation has been achieved through a tandem reaction involving a diazo cross‐coupling, 6π electrocyclization, and oxidative aromatization.     

Transfer of Aryl Halide to Alkyl Halide: Reductive Elimination of Alkylhalide from Alkylpalladium Halides Containing syn‐β‐Hydrogen Atoms

β‐Hydride abstraction is a well‐accepted elementary step for catalytic cycles in organometallic chemistry. It is usually anticipated that alkylpalladium halides containing syn‐β‐hydrogen atoms will undergo β‐hydride abstraction to afford the Heck‐type products. However, this study discloses that the above general knowledge is only conditionally correct. Our experimental results demonstrate that the reductive elimination of alkylhalides from alkylpalladium halides containing syn‐β‐hydrogen atoms may surpass the β‐hydride abstraction or even become exclusive in certain cases.     

Synthesis and self-assembly behavior of thermoresponsive triblock copolymer

Block copolymers comprising thermosensitive poly(N-isopropylacrylamide) (PNIPAM) and hydrophobic poly(n-butyl acrylate) (PBA) blocks, were synthesized using the reversible addition-fragmentation chain transfer polymerization (RAFT), their thermosensitive behavior was studied by ultraviolet spectrophotometer (UV) and dynamic light scattering (DLS). The lower critical solution temperature (LCST) was strongly correlated to the hydrophobic/hydrophilic ratio of the copolymers. Their micellization and self-assembly behavior in dilute aqueous solution were studied by surface tension (SFT), DLS and TEM. The resulting block copolymers reversibly formed or deformed micellar assemblies during their LCSTs. The critical micelle concentration (CMC) was controlled by the composition of PBA and PNIPAM, indicating the successful formation of the block copolymers.     

Ultrasound/microwave‐assisted extraction and comparative analysis of bioactive/toxic indole alkaloids in different medicinal parts of Gelsemium elegans Benth by ultra‐high performance liquid chromatography with MS/MS

Indole alkaloids are the main bioactive/toxic components in Gelsemium elegans Benth. To determine the distribution and contents of indole alkaloids in its different medicinal parts, a novel and rapid method using ultra‐high performance LC (UPLC) with MS/MS has been established and validated with an optimized ultrasound/microwave‐assisted extraction method. Four constituents, namely, humantenidine, humantenmine, gelsemine, and koumine, were simultaneously determined in 6 min. Chromatographic separation was achieved on an ultra‐high performance LC BEH C₁₈ column with a gradient mobile phase consisting of methanol and water (containing 0.1% formic acid both in methanol and water) at a flow rate of 0.3 mL/min. The detection was performed on a triple quadrupole electrospray MS/MS by positive ion multiple‐reaction monitoring mode. All the analytes showed good linearity (r ≥ 0.9934) within a concentration range from 0.1–25 μg/mL with a LOQ of 25–50 ng/mL. The overall intra‐ and intervariations of four components were <4.7% with an accuracy of 97.3–101.3%. The analysis results showed that there were remarkable differences in the distribution and contents of four chemical markers in the roots, stems, and leaves of G. elegans Benth. The findings can provide necessary and meaningful information for the rational utilization of its resources.     

极谱法测定矿石及冶金渣中铍含量

矿石及冶金渣试样与过氧化钠在700℃熔融,用温水浸取,以一定量盐酸酸化后定容。分取部分试样溶液使其中铍(Ⅱ)与铍试剂Ⅲ在EDTA、氯化铵和氨水底液中,生成稳定的配合物,该配合物于-0.80V(vs.SCE)处产生一灵敏的吸附波,其峰电流的二阶导数与铍(Ⅱ)的质量浓度在0.004~0.20mg·L-1范围内呈线性关系,检出限(3S/N)为0.3μg·L-1。方法用于了7个矿石及冶金渣样品的分析,所得测定值与认定值一致。方法的加标回收率在96.0%~105%之间,相对标准偏差(n=6)在1.3%~9.7%之间。