STUDIES ON ION IMPLANTATION AND ELECTRICAL PROPERTIES OF POLYACETYLENE FILMS

The effects of ion implantation on ployacetylene films PA have been studied with Ar~+, Fe~+, C1~+, I~+, Na~+ and K~+ ions in the energy range of 15—30 keV. The changes of PA films in the electrical conductivity, due to chemical doping and ion implantation in relation to their structure and depth profiles of impurities, were measured through infrared (ATR/FTIK), Rutherford backscattering spectrometry (RBS) and the four probe technique. In all cases, ion implantation of active ions exhibits the same effects as chemical doping. The formation of p-n junction is observed at the interface of implanted region and chemical doped PA substrate. The mechanism of interaction process between ion beam and polymer is also discussed.     

痕量溴的阻抑动力学荧光法测定

基于在磷酸介质中溴对溴酸钾氧化丁基罗丹明B反应的抑制作用，建立了痕量溴的阻抑动力学荧光分析的新方法；应用单纯形最优化法确定了 实验条件，方法的检出限0.075μg/L，线性范围0.40-6.40μg/L；将该法应用于地下水、人发中溴的分析，获得满意结果，并对反应机理进行了初步探讨。     

新型聚丙烯酸酯类柴油降凝剂分子模型的建立及验证

在前期工作得出的正构烷烃含量与浊点、冷滤点、凝点的定量关系模型基础上，选择柴油降凝剂的基团对柴油降凝剂分子结构进行了设计，得出了设计模型。结果表明，将含氮基团引入柴油降凝剂可以显著提高柴油降凝剂的性能。根据设计模型合成了一系列聚丙烯酸单酯和混合酯柴油降凝剂，并通过对柴油降凝剂的性能测试结果和自行设计的计算程序对设计模型进行了验证，结果表明，从柴油正构烷烃含量对柴油降凝剂的配比进行设计是可行的。     

Synthesis of polypiperazine-amide thin-film membrane on PPESK hollow fiber UF membrane

A new interfacial polymerization (IP) procedure is developed in order to synthesize polypiperazine-amide thin-film membrane on the inner surface of poly(phthalazinone ether sulfone ketone) (PPESK) hollow fiber ultrafiltration (UF) membrane.A hollow fiber composite membrane with good performance was prepared and studied by FT-IR and scanning electron microscopy.     

几种常见水果的微量元素分析

运用原子吸收分光光度法测定了几种常见水果中部分微量元素含量。其中榴莲的Mg、Zn、Cu、K含量位于四种水果之首。美国提子中Ca含量最高，芒果中Fe含量最高。以上差别具有统计学意义。六种元素的回收率为90％-106．5％。连续6次测定样品，变异系数(CV)为0．96％。     

Facile synthesis of 9-（N-amino-4-fluoromethyl-3-pyrrolidinyl）-2- fluoro-6-aminopurine from trans-4-hydroxy-L-proline

A novel and simple procedure for synthesis of azanucleoside by Mitsunobu reaction between N-(p-nitrobenzyloxycarbonyl)- trans-4-hydroxy-D-proline methyl ester obtained from trans-4-hydroxy-L-proline after six-step reaction and 2-fluoro-6-azidopurine is described,and azanucleoside is fluorinated by new fluridizer 2,2-difluoro-1,3-dimethylimidazolidine (DFI).All reactions could be carded out under mild condition.     

1‐Acetyl‐3′‐(4‐bromophenyl)‐3′‐chlorospiro[3H‐indole‐3,2′‐oxetan]‐2(1H)‐one

In the title compound, C₁₈H₁₃BrClNO₃, the heterocyclic ring of the indole is distorted from planarity towards an envelope conformation. The orientations of the indole, oxetane, chloro and bromo­phenyl substituents are conditioned by the sp³ states of the spiro‐junction and the Cl‐attached C atoms.     

黄芪中微量锌的测定

用分光光度法测定了黄芪中锌的含量,该法的平均回收率为99.01%.变异系数为1.50%.     

Modified modeling of the effect of pH and viscosity on the mass transfer in hydrophobic hollow fiber membrane contactors

This paper studied the effect of pH and the viscosity of feed solution on the mass transfer in two different specifications of hydrophobic hollow fiber membrane contactors. Experimental results showed that the pH of the feed had a significant effect on the rate of mass transfer, the flux and the removal efficiency of easily ionized volatile compounds (VCs), such as ammonia. In unbuffered feed solutions, both the resistance of membrane and the resistance of feed side were affected by the pH of feed and both of them had contributions to the overall mass transfer. A model, , was proposed to predict the effect of pH and gave good agreement with the experimental data for the two contactors. The relationship between viscosities and the mass transfer coefficient could be described by . Based on our experiments, the change of the viscosities in the concentration range of ammonia from 50 to 10,000 mg l⁻¹ caused about 3–4% variation of the mass transfer coefficients. Moreover, it may be more suitable to use the equilibrium concentrations of volatile species instead of the total concentrations of VCs to estimate mass transfer coefficients, removal efficiency and flux. Experimental results also revealed that the choice of the pH of feed might be one of the most crucial factors for removing easily ionized VCs, such as ammonia, from water and wastewater.     

Topology evolution and gelation mechanism of agarose gel

Kinetics as well as the evolution of the agarose gel topology is discussed, and the agarose gelation mechanism is identified. Aqueous high melting (HM) agarose solution (0.5% w/v) is used as the model system. It is found that the gelation process can be clearly divided into three stages: induction stage, gelation stage, and pseudoequilibrium stage. The induction stage of the gelation mechanism is identified using an advanced rheological expansion system (ARES, Rheometric Scientific). When a quench rate as large as 30 deg C/min is applied, gelation seems to occur through a nucleation and growth mechanism with a well-defined induction time (time required for the formation of the critical nuclei which enable further growth). The relationship between the induction time and the driving force which is determined by the final setting temperature follows the 3D nucleation model. A schematic representation of the three stages of the gelation mechanism is given based on turbidity and rheological measurements. Aggregation of agarose chains is promoted in the polymer-rich phase and this effect is evident from the increasing mass/length ratio of the fiber bundles upon gelation. Continuously increasing pore size during gelation may be attributed to the coagulation of the local polymer-rich phase in order to achieve the global minimum of the free energy of the gelling system. The gel pore size determined using turbidity measurements has been verified by electrophoretic mobility measurements.