超子中子星性质的温度效应

从相对论平均场理论出发,考虑核子、超子和介子的相互作用,研究了温度对中子星组成粒子、状态方程和中子星质量等的影响.发现温度越高,超子在中子星内部出现时的重子数密度越低.当密度较高时,中子星的核心区主要由超子组成,即中子星转变成以奇异粒子为主要成分的超子星,并且这种转变受到温度的影响,温度越高,转变密度越低.由于超子的出现,中子星核心高密度区域的状态方程,对于不同温度,差别不大,所以有限温度中子星的最大质量都在1.8M_⊙附近.这与观测结果相符.     

The Tolerance of All-Optical Switching Based on Cascaded Second-Order Nonlinearity in PPLN APE Waveguide

Based on solving the couple mode equation numerically, the characterization of the signal power on the gate power was analyzed. And the relationship of the tolerance of the grating period and the bulk temperature on the interaction length was analyzed.     

矩阵特征值的几个不等式

研究矩阵特征值的上、下界以及特征值的实部、虚部的不等式 ,给出了特征值一些新的上界和下界     

Optimized prefactored compact schemes

The numerical simulation of aeroacoustic phenomena requires high-order accurate numerical schemes with low dispersion and dissipation errors. In this paper we describe a strategy for developing high-order accurate prefactored compact schemes, requiring very small stencil support. These schemes require fewer boundary stencils and offer simpler boundary condition implementation than existing compact schemes. The prefactorization strategy splits the central implicit schemes into forward and backward biased operators. Using Fourier analysis, we show it is possible to select the coefficients of the biased operators such that their dispersion characteristics match those of the original central compact scheme and their numerical wavenumbers have equal and opposite imaginary components. This ensures that when the forward and backward stencils are added, the original central compact scheme is recovered. To extend the resolution characteristic of the schemes, an optimization strategy is employed in which formal order of accuracy is sacrificed in preference to enhanced resolution characteristics across the range of wavenumbers realizable on a given mesh. The resulting optimized schemes yield improved dispersion characteristics compared to the standard sixth- and eighth-order compact schemes making them more suitable for high-resolution numerical simulations in gas dynamics and computational aeroacoustics. The efficiency, accuracy and convergence characteristics of the new optimized prefactored compact schemes are demonstrated by their application to several test problems.     

微球板电子倍增器基体制备技术研究

新型微球板电子倍增器和微通道板相比具有高增益、无离子反馈、制备简单、造价低廉等优点。介绍了微球板电子倍增器的工作原理、特点和广阔的应用前景。由于微球板基体的形成技术是微球板制备的关键技术，论文从理论上研究了微球板基体烧结过程中的烧结速率。并采用自行设计组分的高铅玻璃，用立式炉成珠设备进行了玻璃微珠的制备。探索了微球板制备过程中玻璃微珠的分级技术、微球板电子倍增器基体成型工艺和技术。制备出基本满足要求的微球板电子倍增器基体。给出了制造的样品和文献上样品结构的SEM对比照片，最后对实验过程中的一些现象进行了分析，并给出了实验的结论。     

利用模式的对称性研究光子晶体光纤的色散

由光子晶体光纤的对称性可以得到模式分布的对称性，根据模式的对称性选择适当的展开函数，可以使计算量大大减少。计算了六角结构光子晶体光纤的色散特性，得到了波长在1．55pm处色散为零时，光子晶体光纤的结构参量所满足的方程。     

某轴流压气机叶尖间隙效应实验研究

本文对某低速轴流压气机叶尖间隙尺度对性能的影响进行了实验研究,并通过不同的机匣结构情况研究一种叶尖漏流不敏感机匣。实验表明,不同的间隙尺度对叶轮机总体性能存在十分明显的影响。对绝大部分运行状态,小间隙下的压升和效率均明显高于大间隙的情况。另外,所采用的毛刷式和篦齿式的机匣实验结果表明,不论毛刷式还是篦齿式机匣,在大流量负攻角情况下对性能的影响不大,但毛刷式机匣并不能达到提高失速裕度的目的,而篦齿式机匣在小流量情况下对压升有所提高,但对效率影响不大。     

石灰石闪蒸改性及脱硫性能的试验研究

本文对3种不同产地的石灰石进行了闪蒸改性处理,对改性石灰石颗粒的孔径分布进行了测定,研究了压力、温度等参数对石灰石闪蒸改性的影响。并在气流反应器上对闪蒸后的样品进行了硫化试验。结果表明,在一定的压力和温度下,闪蒸处理能够增大石灰石颗粒的微孔孔径,并使石灰石样品的脱硫性能得到较大提高。     

斐索梯度折射率光纤透镜传感实验

采用LD泵浦的单纵模Nd：YVO4倍频激光器、梯度折射率光纤透镜等器件构成斐索梯度折射率光纤透镜传感实验仪．本文介绍了实验装置和实验原理，并给出了实验结果。     

Writing Fiber Grating of Different Wavelength Using the Same Phase Mask

Chirped fiber grating was used in dispersion compensator. We tried to use the same phase mask to write fiber grating of different wavelength with two methods to reduce the price of the fiber grating.