SAPO-11分子筛的合成及其晶貌

以二异丙胺或二正丙胺为模板剂用水热合成法合成SAPO-11分子筛,发现pH值及模板剂的种类对所生成的SAPO-11晶体形貌有着明显的影响,通常观察到的球形晶貌实属长形柱体的聚集体。     

Interaction between Ti-gel and silver, copper, as well as nickel compounds under ultrasound irradiation

Ag-TiO₂, Cu-TiO₂ and Ni-TiO₂ were prepared by sonication. The interactions of Ti-gel with silver, copper and nickel ions under ultrasound irradiation are very different, although these ions can be dispersed very well in titania. The results of EDXA and XRD analysis indicate that Ti-gel does not react with AgCl and crystallizes unaffectedly to form rutile. M(OH)₂ (M = Cu and Ni), on the other hand, favors polycondensation with Ti-gel and affects the crystallization of Ti-gel. CuO favors stabilization of the anatase phase. Ni²⁺ ions tend to incorporate more easily into titania than Cu²⁺ ions do when the samples are calcined. TEM, and BET were also used to characterize the samples.     

自旋交叉配合现象与分子电子器件

自旋交叉配合物在热、压力或光诱导自旋交叉现象的同时会伴随着其它一些协同效应，比如配合物颜色的改革、存在着大的热滞后效应等，这些协同效应是单个分子或分子集合体作为热开关、光开关和信息存储元件材料的基础。因此，自旋交叉配合物是开发新型的热开关、光开关和信息存储元件材料的理想分子体系。本文概述了自旋交叉现象的研究历史、现状和未来的发展趋势。讨论了影响配合物自旋交叉性质的各种内在的和外部的因素，总结了目前用于研究自旋交叉现象的各种现代测试技术。最后，展望了自旋交叉配合物在分子电子器件方面的应用前景。     

Urokinase片断的二级、三级结构预测及构效关系研究

urokinase(简称UK)属于絲氨酸蛋白酶,其一级结构已经测定。去掉前135个残基后得到的低分子量UK(LUK)氨基酸残基的顺序与糜胰蛋白酶、胰蛋白酶等絲氨酸蛋白酶十分类似。从二硫桥的配置来看LUK与糜胰蛋白酶比较接近,而UK对Lys侧链处肽键的专一性则和胰蛋白酶相近。在这一类酶中,起到活性中心作用的氨基酸为Ser195,His57及Asp102.在UK中此三个氨基酸都保留了下来。蛋白水解酶中起专一性作用的残基主要是     

金属铝燃料电池的研究

铝是一种丰富廉价的有色金属，金属铝电池作为一种新型燃料电池，具有低成本、无毒害、高功率、高能量密度等优点。本文简述了金属铝电池的工作原理，并对铝阳极、空气阴极、催化剂、电解液和铝燃料电池的应用等方面的研究概况进行了叙述。     

化学修饰碳糊铝传感器的研制和应用

以聚合β 环糊精与茜素红的包结络合物为修饰剂 ,固体石蜡为粘合剂 ,制成化学修饰碳糊电极 ,于Al3+溶液中活化后 ,对铝产生灵敏电位响应。响应范围为 1 .0× 1 0 - 4～1 .0× 1 0 - 1 mol L;斜率为 1 7.4 pAl;时间为 3 0～80s;检出限为 7.9×1 0 - 5mol L。溶液中常见离子不干扰测定。测定了样品中的铝 ,结果符合分析要求。     

A New Sesquiterpene Lactone from Ainsliaea bonatii

A new sesquiterpene lactone, Ainsliaolide A, was isolated from Ainsliaea bonatii. The structure was determined on the basis of spectral data.     

7-十二烯基-8-羟基喹啉的合成

7-十二烯基-8-羟基喹啉是一种新型螯合型萃取剂(Kelex 100的主要成份)。它是(1a)和(1b)异构体的混合物。本文报道了利用1-氯-1,1,3,3-四甲基丁烷与过量丁二烯-[1,3]的1,4加成反应合成重要中间体1-氯-5,5,7,7-四甲基辛烯-[2](3)的方法,此法具有室温、常压、产率高、设备简单、操作方便等优点。     

Synthesis and structural characterization of 3-thienyl alkyl imides

Five new thiophene imides having the structures C₄H₃SC(O)N(H)C(O)R (where R=Me, Et, Pr, t-Bu, 1-4) and C₄H₃SCH₂C(O)N(H)C(O)CH₃5 have been prepared. Control over the orientation of the carbonyl groups was achieved by the introduction of a bulky group in the terminal position of the side chain, and molecular modeling calculations indicated that the energy difference between the ct and tt conformations is small. The acidity of 1-4 decreases from Me to t-Bu, and, although 1-4 will not undergo oxidative polymerization, the introduction of a single spacer CH₂ group allows 5 to polymerize.     

A novel three-dimensional coordination polymer [Cd2(C3H2O4)2(H2O)2(μ 2-hmt)] n (hmt = hexamethylenetetramine): synthesis and crystal structure

The self-assembly of the Cd^II ion, hexamethylenetetramine (hmt) and malonate ligand yields a three-dimensional (3D) coordination polymer [Cd₂(C₃H₂O₄)₂(H₂O)₂( ₂-hmt)] _n with channels. The Cd^II ion is located in a octahedral coordination environment, composed of four oxygen atoms from three malonates, one oxygen atom of water and one nitrogen atom of hmt. Two oxygen atoms of each malonate coordinate to the same Cd^II ion and the other two oxygen atoms connect to adjacent two Cd^II ions respectively to form a two-dimensional infinite network, these networks are bridged by ₂-hmt coordinated to Cd^II ions to product a 3D architecture.