Regioselectivity in Lewis acids catalyzed X-H (O, S, N) insertions of methyl styryldiazoacetate with benzyl alcohol, benzyl thiol, and aniline

Different from Rh(II) catalysts, X-H (X = O, S, N) insertion of methyl styryldiazoacetate catalyzed by Lewis acids including Cu(I), Cu(II) and Ag(I) complexes occurred at γ-position preferably. Only (E)-isomer was observed in the reactions. This method provides an alternative for the synthesis of γ-hydroxyl or γ-amino acid derivatives.     

n—InP在Fe^3＋／Fe^2＋溶液中光脉冲暂态行为（Ⅳ）

研究了波长、温度及表面处理对ｎ－ＩｎＰ光脉冲暂态行为的影响。结果表明，波长对时间常数无影响；随着温度升高，峰值下降，衰减变快。讨论了表面处理的影响，并对实验结果作了必要的解释。     

氮化铁催化剂的制备及其苯胺催化加氢性能

用α－Ｆｅ２Ｏ３与氨气程序升温还原方法制备出不同温度氮气的氮化铁系列催化剂。通过ＸＲＤ测试对氮化过程中的晶相转变进行了分析。在中压反应装置上考察了氮化铁系列催化剂上苯胺加氢活性以及反应条件对苯胺加氢反应活性的影响。结果表明，在７００℃氮化制香的氮化铁催化剂显示有较高的苯胺加氢活性，在氢压为３．０ＭＰａ，温度为２５０℃，ｎ（Ｈ２）／ｎ（ｏｉｌ）＝１８，液体空速（ＷＨＳＶ）为０．３ｈ＾－１时，该催化剂     

真珠钙驱铅实验研究

研究了真珠钙驱铅效果，给亚急性中毒的大鼠服用后，可增加铅从尿中排量，降低骨中蓄积量，对防治铅中毒有一定作用。     

季铵盐用于示波极谱滴定法测定培氟沙星和环丙沙星

介绍采用季铵盐 十六烷基三甲基溴化铵作滴定剂的示波极谱滴定法测定培氟沙星和环丙沙星含量的方法。在pH 4 .8HAc NaAc缓冲溶液中 ,培氟沙星和环丙沙星均能与四苯硼钠 (Na TPB)作用生成沉淀 ,干过滤后 ,用十六烷基三甲基溴化铵标准溶液代替在示波极谱滴定法中常用的有毒硫酸亚铊作为滴定剂 ,回滴滤液中过量的Na TPB ,由示波极谱图 [dE dt=f(E)曲线 ]上TPB的切口消失指示终点。本法终点直观、灵敏 ,操作简便、快速 ,应用于多批原料药样品的测定 ,均获得满意的结果 ,其回收率在 99.9%～ 10 0 .3%之间 ,最大相对误差 <± 0 .3% ,与非水滴定法测得结果基本吻合。     

Frequency-domain measurement of the photodegradation process of fluorescein

The frequency-domain technique is applied to measure the photodegradation rate of fluorescein in aqueous solutions. The illuminating light is modulated, and the changes in fluorescence from the illuminated region are detected synchronously. A constant flow rate is imposed on the fluorescein solution to control the mass transport of fluorescein into the illuminated region. The fluorescence response is described by a model that assumes that photodegradation occurs from the triplet excited state. The predictions of the model are consistent with the observed variations in the fluorescence response with flow rate, modulation frequency and incident power. We discuss in this article how the dependence of the model parameters on experimental conditions can be used to infer the photodegradation rate as well as some of the details of the photodegradation mechanism. The results are consistent with the known mechanism of photodegradation of fluorescein. The frequency-domain technique gives a photodegradation rate of 53 s(-1) in an air-saturated solution and 37 s(-1) in solutions purged with argon gas.     

Preparation and swelling properties of hydrolysis-resistant superabsorbent composite based on acrylic acid and sodium bentonite

Abstract

A novel hydrolysis-resistant superabsorbent composite was prepared via the solution polymerization based on acrylic acid (AA) and sodium bentonite (SBT) as monomers, tetraallylammonium bromine (TAAB) as crosslinker and ammonium persulfate (APS) as initiator. The mechanism of polymerization and the structure of the superabsorbent polymer (SAP) were studied by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (X-ray), and scanning electron microscopy (SEM). The reaction conditions such as different mass ratios of APS to AA, TAAB to AA, SBT to AA, neutralization degree of AA were optimized by orthogonal experiment, and the influence of each reaction condition on the capacity of water absorption at 150?°C was investigated via single-factor controlled experiment. The hydrolysis resistance and swelling kinetics of the SAP were studied in different solutions at 150?°C. Compared to traditional SAPs, the SAP synthesized with TAAB as crosslinker performed a more excellent hydrolysis resistance and water absorbency capacity at high temperatures. The water absorbency in distilled water or 0.1?mol L^?1 NaCl solution could reach 392.6 and 145.2?g g^?1at 150?°C, respectively. The SAP maintaining high swelling capacity in the pH range of 5–9 indicated its wide application values in the acidic or alkaline environment at high temperature. In addition, the SAP exhibited good reusability which could still retain about 73% of its initial water absorbency after reswelling six times at 150?°C.     

Cu-Zn-Sn体系富Sn区液相限的研究

近些年来,无铅低熔点填料日渐引起人们的兴趣,且将得到广泛的应用。Cu-Zn-Sn合金正是无铅低熔点填料的一种基本合金。该体系相图虽有一些报道,但他们的研究只涉及富铜区(>50Wt％)的液相限和等温截面(500℃)。我们颇感兴趣的富Sn区的液相限,尚未见文献报道,因此测定该体系富Sn区的液相限是必要的。关于Cu-Zn-Sn体系的三个相关二元体系,已有文献报道,也较成熟。对于Cu-Zn体系,富Zn区600℃以下存在两个转熔反应,其转熔点分别为Q(～88Wt％Zn,598℃),W(97.5-98.5Wt％Zn,424℃);Cu-Sn体系富Sn区有一个转熔反应,其转熔点     

导电高分子膜包覆YBa2Cu3O7超导体抗环境作用的研究

通过电化学途径和化学途径在ＹＢａ＿２Ｃｕ＿３Ｏ＿７超导体表面制备了导电高分子聚吡咯膜，用以保护超导体不受环境作用的影响，实验结果发现电化学过程能破坏ＹＢａ＿２Ｃｕ＿Ｏ＿７的超导性，而采用化学法制备的聚吡咯和聚氯乙烯混和材料包覆在ＹＢａ＿２Ｃｕ＿３Ｏ＿７表面后，超导体不仅保持原有超导性，而且有很好的保护超导体免遭环境中酸和水作用的能力。     

丙烯腈中微量有机杂质的测定

本文采用ＸＥ－６０交联弹性石英性细管柱及４０７有机体埴充柱气色谱法可分分析丙烯腈中有机杂质。通过对柱长、担体粒度、液膜厚度、柱温和载气流量的选择。确定出最佳色 谱条件。