A catalytic chemical vapor deposition synthesis of double-walled carbon nanotubes over metal catalysts supported on a mesoporous material

Double-walled carbon nanotubes (DWNTs) have been synthesized by catalytic chemical vapor deposition (CCVD) over supported metal catalysts decomposed from Fe(CH₃COO)₂ and Co(CH₃COO)₂ on mesoporous silica. Bundles of tubes with relatively high percentage of DWNTs, in areas where tubular layered structures could be clearly resolved, have been observed by transmission electron microscopy (TEM). In other areas, crystal-like alignment of very uniform DWNTs was observed for the first time, suggesting that mesoporous silica might play a templating role in guiding the initial nanotube growth. In addition, compatible with nano-electronics research, bridging of catalytic islands by DWNTs has also been demonstrated.     

Investigation on the Performance of Supported Molybdenum Carbide for the Partial Oxidation of Methane

The performance of uspported and unsupported molybdenum carbide for the partial oxidation of methane (POM) to syngas was investgated.An evaluation of the catalysts indicates that bulk molybdenum carbied has a higher methane conversion during the initial stage but a lower selectivity to CO and H2/CO ratio in the products.The rapid deactivation of the catalyst is also a significant problem.However,the supported molybdenum carbide catalyst shows a much higher methane conversion,increased selectivity and significantly improved catalytic stability.The characterization by XRD and BET specific area measurements depict an improved dispersion of molybdenum carbide when using alumina as a carrier.The bulk or the supported molybdenum carbide exists in the β-Mo2C phase,while it is transformed into molybdenum dioxide postcatalysis which is an improtant cause of molybdenum carbide deactivation.     

Di­chloro­bis(1‐propyl­imidazolidine‐2‐thione‐κS)­cobalt(II)

The crystal structure of the title compound, [CoCl₂(C₆H₁₂N₂S)₂], consists of monomer units of a Co^II atom coordinated to two 1‐propyl­imidazolidine‐2‐thione ligands and to two chloride ions. The heterocyclic thione ligand is monodentate and coordinated to the metal through the thione S atom. The environment around the Co^II atom is a slightly distorted tetrahedron. The Co—S bond lengths are 2.341 (2) and 2.330 (2) Å, and the Co—Cl bond lengths are 2.234 (2) and 2.238 (2) Å. The most important point of distortion is the S—Co—S bond angle of only 97.83 (8)°. Intramolecular classical hydrogen bonds are found between the chloride ions and the N—H groups. Additionally, intra‐ and intermolecular non‐classical hydrogen bonds are found.     

过敏性哮喘患者血清中10种必需微量元素水平的研究

３４例过敏性哮喘患者血清中铁，锌、铜，锰硒铬，钴镍，钡，钼的含量水平与对照组比较，揭示：（１）铁，铜，铬的含量升高；（２）硒，镍，钴、钒的钼的含量降低；（３）锌和锰的含量差异无显著性，Ｐ〉０．０５。     

硝基芳环和硝基杂芳环中氢的替代亲核取代

氢的替代亲核取代反应(VNS)是与硝基芳环的亲电反应、亲核反应不同的一种新反应. 将VNS与硝基芳环的亲电反应、亲核反应做比较, 阐述了VNS的定义; 通过对竞比实验、速控步骤和动力学同位素效应的分析, 解释了VNS的反应机理; 分别从硝基芳环的结构、亲核试剂的类型和反应条件三方面讨论了影响VNS定位效应的因素; 介绍了VNS反应的应用, 尤其是VNS胺化反应在军事化学中的实际应用.     

Sm, Pr掺杂CeO2和CeMoO15基固体电解质的结构与性能

采用溶胶凝胶法制备了Sm和Pr掺杂的CeO2和CeMoO15基固体电解质, 通过X射线衍射(XRD)、拉曼光谱(Raman)、场发射扫描电镜(FE-SEM)等手段对氧化物结构进行了分析, 用交流阻抗谱测试了其电性能, 并比较了不同基体及其掺杂体系的结构与电性能. 结果表明, Ce6MoO15基掺杂体系的导电性能高于CeO2基掺杂体系; 元素Mo的加入使Ce6MoO15基材料的晶粒尺寸增大, 晶界相成分减少, 材料的晶界电导率增加, 600 ℃以下材料导电性能明显提高; Pr的掺入减小了材料的晶粒尺寸, 提高了材料的晶界电导率.     

甲烷氧化偶联Na2WO4-Mn/SiO2催化剂热效应的研究

采用固定床微型反应装置,研究了甲烷氧化偶联反应过程中Na2WO4-Mn/S iO2催化剂床层的热效应和催化性能的关系,考察了反应炉温、CH4/O2比和反应气体空速对催化剂床层热点分布的影响.研究结果表明,甲烷氧化偶联催化剂床层的热效应强烈依赖于反应条件.反应炉温越高,CH4/O2比越低,反应气体空速越大,催化剂床层的热点温度越高.结合催化性能和热效应关系的研究,为优化甲烷氧化偶联的反应操作提供了实验依据.     

An Efficient and High‐Yield One‐Pot Synthesis of Bis(oxazoline)s

An efficient and mild one‐pot synthesis of bis(oxazoline) (BOX) ligands is developed from reactions of dicarboxy dichlorides with β‐amino alcohols in the presence of 11.0 equiv. NEt₃ followed by the addition of 3.6 equiv. methanesulfonyl chloride (MsCl). Nine different BOX ligands were prepared in excellent yields of ≥ 80%. Advantages of this improved synthesis are mild reaction conditions, short total reaction time of 9 h, and high isolated yields.     

The Self-catalytic Esterification Reaction of O-Phosphoryl Serine Derivative

O-Phosphoryl serine derivative can perform serf-catalytic esterification reaction in the mixture of CH3OH and CHCl3 at the room temperature. The phosphoryl group participation was the key step of the esterification. This type of reactions were proposed through an intermediate of mixed phosphoric-carboxylic anhydride that might provide a clue to the function of the phosphoryl group in the phosphorylated enzymes and in the prebiotic synthesis of protein.     

Synthese und Struktur von [(Ph3PAu)3NPPh3][PF6]2, einem Gold(I)‐phosphoraniminato‐Komplex

Synthesis and Crystal Structure of [(Ph₃PAu)₃NPPh₃][PF₆]₂, a Gold(I) Phosphoraneiminato Complex The photolytic reaction of Ph₃PAuN₃ with Cr(CO)₆ in THF yields the phosphoraneiminato complex [(Ph₃PAu)₃NPPh₃]²⁺ in low yield as well as the cluster cation [(Ph₃PAu)₈]²⁺ as the main product. The phosphoraneiminato complex crystallizes from CH₂Cl₂ with [PF₆]^? ions as [(Ph₃PAu)₃NPPh₃][PF₆]₂·CH₂Cl₂ in the triclinic space group with a = 1200.8(1), b = 1495.6(2), 2053.5(5), α = 86.97(2)°, β = 82.79(1)°, γ = 81.87(2)°, and Z = 2. The phosphoraneiminato ligand bridges through its N atom three Au atoms, which itself are connected to each other by weak aurophilic interactions.