Characterization and Control of Residual Stress and Curvature in Anodically Bonded Devices and Substrates with Etched Features

While anodic bonding is commonly used in a variety of microelectromechanical systems (MEMS) applications, devices and substrates that incorporate this processing technique are often subjected to significant residual stress and curvature that create post-processing and reliability issues. Here, using an anisothermal anodic bonding procedure, residual stresses and the resulting wafer curvature in these structures are controlled by varying the initial bond temperatures of the silicon and Pyrex wafers independently. Residual stresses are quantified by measuring bulk wafer curvature and, locally, stress concentrations are measured using infrared photoelasticity accompanied by 3-D thermomechanical finite element analysis. Based on the good agreement between numerical predictions and experimental results, this process can be used to determine the bulk post-bond wafer curvature and to reduce the likelihood of structural failure at these sites, by changing the residual stresses from tensile in nature, which may drive initiation and growth of cracks, to compressive, which can suppress such failures.     

A vectorial algorithm with finite element method for prediction of powder segregation in metal injection molding

The design of the mold and the choice of the injection parameters for metal injection molding (MIM) is required to maintain homogeneity of the filled mixture. However, powder segregation is unavoidable in MIM because of the significant difference in densities of the metallic powder and the polymer binder. To achieve an effective prediction of segregation effect, a biphasic model based on mixture theory is employed. The viscous behaviors of each phase and the interaction coefficient between the flows of the two phases should be determined. The solution of two coupled Navier–Stokes equations results in a tremendous computation effort. The previous development of an explicit algorithm makes the biphasic simulation much faster than that of the classic methods. However, it is strongly desired to reduce or even eliminate the numerous global solutions for pressure fields at each time step. Hence, a new vectorial algorithm is proposed and developed to perform the simulation only by vectorial operations. It provides the anticipated efficiency in the simulation of biphasic modeling, and the advantage to use the classic elements of equal‐order interpolations. Some results produced by the two algorithms are compared with the experimental values to validate the new vectorial algorithm. Copyright © 2012 John Wiley & Sons, Ltd.     

Robust adaptive sliding mode control for synchronization of space-clamped FitzHugh–Nagumo neurons

Unlike taking the same external electrical stimulation to discuss chaotic synchronization in the literature, the synchronization between two uncouple FitzHugh?CNagumo (FHN) neurons with different ionic currents and external electrical stimulations is considered. The main contribution of this study is the application of a robust adaptive sliding-mode controller instead of the active elimination. The proposed sliding mode controller associated with time varying feedback gains cannot only tackle the system uncertainties and external disturbances, but also compensate for the mismatch nonlinear dynamics of synchronized error system without direct cancellation. Meanwhile, these feedback gains are not determined in advance but updated by the adaptive laws. Sufficient conditions to guarantee the stable synchronization are given in the sense of the Lyapunov stability theorem. In addition, numerical simulations are also performed to verify the effectiveness of presented scheme.     

Correlated scale-free network with community: modeling and transportation dynamics

Many transport processes on network depend crucially on the underlying network topology. In this paper, we propose a model to generate correlated scale free transportation networks with community structure by considering the mechanisms of dynamical network evolution and rewiring links. With the introduction of congestion effects, we investigate the performance and carrying capacity of this network. The results show that congestion in the uncorrelated network is more serious than the assortative or disassortative ones. Therefore, the correlated network with communities can bear much more traffic flow. In addition, the networks with lager modularity can enhance the transportation efficiently.     

认知无线电网络中提高传输层端到端吞吐率的跨层参数配置

在认知无线电网络中, 传输层端到端(TCP)吞吐率是衡量网络性能的重要指标. 前期相关研究大都具有以下两方面缺点: 第一, 大部分研究只考虑了协议底层参数来优化物理链路性能, 对传输层性能有所忽略; 第二, 目前的研究大都基于马尔可夫决策过程建模, 这需要网络具有完全知识, 使得这类模型的应用受到很大限制. 针对以上问题, 本文提出一种新的算法: 网络中每个节点通过联合配置物理层调制方式、发射功率、 链路层信道接入和TCP拥塞控制因子来找到传输层端到端近似最优吞吐率. 由于无线设备对环境感知存在误差, 本文将网络模型建模为部分可观测马尔可夫决策过程, 并将其转换成信念状态马尔可夫决策过程, 采用Q值迭代找到近似最优策略. 仿真分析表明, 提出的算法能在动态无线环境下以一定的误差限收敛于最优策略, 能在功率受限条件下, 有效提高传输层端到端吞吐率.     

Comparison between relay propagation and direct propagation of Gaussian-Schell-model beam in turbulent atmosphere along a slant path

The relay propagation of Gaussian-Schell-model in turbulent atmosphere along a slant path is studied in this paper. Based on the extended Huygens-Fresnel principle and a quadratic approximation, an analytical formula of average intensity for Gaussian-Schell-model beams in turbulent atmosphere along a slant path is derived, and some special cases are discussed. From the study and the comparison with the direct propagation, we can see that the relay propagation has an advantage over the direct propagation. When the altitude of the target is low, the peak intensity of relay propagation is much larger than that of direct propagation. However, because of the limitation of the relay system aperture for relay propagation and the variation of coherence length for direct propagation, the difference in peak intensity between the two propagations decreases with the increase of the target altitude.     

Magnetic hysteresis and refrigeration capacity of Ni-Mn-Ga alloys near Martensitic transformation

This paper studies the magnetic hysteresis and refrigeration capacity of Ni-Mn-Ga alloys in detail during heating and cooling isothermal magnetisation processes. The Ni-Mn-Ga alloys show larger magnetic hysteresis when they transform from austenite to martensite, but smaller magnetic hysteresis when they transform from martensite to austenite. This behaviour is independent of either the pure Ni-Mn-Ga alloys or the alloys doped with other elements. Because of the existence of the magnetic hysteresis, the relation between the magnetic entropy change and refrigeration capacity is not simply linear. For practical consideration, magnetocaloric effect of Ni-Mn-Ga alloys should be investigated both on cooling and heating processes.     

Synthesis of tetrasubstituted thiophenes from pyridinium 1,4-zwitterionic thiolates and modified activated alkynes

Pyridinium 1,4-zwitterionic thiolates were applied to a formal [3 + 2] annulation reaction with modified activated alkynes, affording various tetrasubstituted thiophenes with aryl, alkenyl, alkyl or silyl group at the special position. The structural modification of alkyne substrates enabled the synthesis of diverse thiophenes to be achieved using the pyridinium 1,4-zwitterionic thiolates as the sulfur-containing building blocks. This approach is metal-free and catalyst-free.