K3Na5(H2NCH2CH2NH3)2{(VO)12O6[B3O6(OH)]6}(H2O)•12H2O的合成与晶体结构

利用水热合成技术成功制备出一种新型多钒硼氧化合物， 用X射线单晶衍射分析技术对其晶体结构和分子结构进行了确定。结果表明在该化合物中多钒硼氧阴离子具有一个新颖的三明治结构。上下两个结构单元都是由六个VO₅四角锥交替地通过顺式和反式共边的方式连接起来构成的一个钒氧三角形结构。中间的结构单元是由BO₃平面三角形和BO₄四面体以共角的方式相互连接形成的一个折叠型的B₁₈O₃₆(OH)₆环。三明治结构中层与层之间通过桥氧相连。一个水分子处于它的核心位置上，与每个VO₅四角锥中的钒原子都保持几乎相等的距离。该化合物及其晶体中存在着丰富的化学结构和成键信息，同时也有作为氧化还原反应催化剂的潜能。     

A theoretical study of electronic excited states of photosynthetic reaction center in Rhodopseudomonas viridis

The electronic singlet vertical excited states of photosynthetic reaction center (PSRC) in Rhodopseudomonas (Rps.) viridis were investigated by ZINDO and INDO/S methods. The effects of the interactions of pigment-pigment and pigment-protein on the electronic excitations were examined. The calculation results showed that the interactions of pigment-pigment and pigment-protein play an important role in reasonably assigning the experimental absorption and circular dichroism (CD) spectra of PSRC in Rps. virids. By comparing the theoretically computed excited states with the experimental absorption and CD spectra, satisfactory assignments of the experimental spectroscopic peaks were achieved.     

ELECTROSPRAYING/ELECTROSPINNING OF POLY(γ-STEARYL-L-GLUTAMATE): FORMATION OF SURFACES WITH SUPERHYDROPHOBICITY

  Electrospraying/electrospinning of poly(γ-stearyl-L-glutamate) (PSLG) was investigated on a series solutions with different concentrations in chloroform. Field emission scanning electron microscopy (FESEM) and attenuated total reflectance Fourier transform infrared spectroscopy (FT-IR/ATR) were used to characterize the morphology and structure of the electrosprayed/electrospun polypeptide mats. It was found that electrospraying of PSLG with concentrations lower than 16 wt% afforded beads, while microfibers could be electrospun at the concentration of 22 wt%. The hydrophobicity of the electrosprayed/electrospun PSLG mats was investigated with static water contact angle (WCA) and tilt angle measurements. It was demonstrated that the superhydrophobic surfaces of PSLG with WCAs and tilt angles in the ranges of 150°-170° and 16.5°-4.2°, respectively, were obtained through electrospraying/electrospinning process.     

肉桂酸类分子非线性光学效应的理论研究

计算了一系列肉桂酸（苯基丙烯酸）类化合物的二阶非线性光学系数，系统地研究了取代基的电子性质和取代位置对其非线性光学性质的影响，并且探讨了该类化合物的饱和取代效应．研究表明，该类化合物的非线性光学性质与其分子结构有着密切的关系．     

Bi-Sr-Ca-Cu-O超导体与氧化物衬底材料的反应性估计

测定了一系列氧化物的电子结合能，显示了铋系超导体与二元氧化物衬底材料的化学反应性可以用固态酸碱反应理论来描述，其反应性大小除了可以用衬底氧化物的酸碱参数估计以外，还可以用衬底氧化物氧离子的内层电子结合能估计．     

马来酸酐与1，2－环己烷二羧酸二异丁酯的气液平衡

采用小沸点仪测定了马来酸酐和1,2－环己烷二羧酸二异丁酯二元系统在不同配料组成条件下的温度与压力数据，并通过内插法得到不同压力下的温度与配料组成的数据.进一步采用单纯形法优化NRTL方程参数，推算了平衡气液相组成，发现该二元系统具有最高压力恒沸点，且该恒沸点随压力的变化显著.当压力降低至20 kPa时, 由温度随气相组成的变化趋势知该恒沸点将趋于消失.     

Biradicals/zwitterions from thermolysis of enyne-isocyanates. Application to the synthesis of 2(1H)-pyridones, benzofuro[3,2-c]pyridin-1(2H)-ones, 2,5-dihydro-1H-pyrido[4,3-b]indol-1-ones, and related compounds

Thermolysis of benzannulated enyne-isocyanates 13 and enyne-isocyanates 36 and 37 promoted the cycloaromatization reactions to generate in situ O,4-didehydro-2-hydroxyquinolines and O,4-didehydro-2-hydroxypyridines, respectively, as reactive intermediates. These cycloaromatized intermediates could be captured either as biradicals and/or as zwitterions depending on the nature of the substituent at the alkynyl terminus. The intermediate derived from cycloaromatization of 13a bearing a phenyl substituent could be regarded as biradical 14, which then abstracts hydrogen atoms from gamma-terpinene leading to 2(1H)-quinolinone 15. Alternatively, the same intermediate could also be regarded as zwitterion 14', which then undergoes an initial hydride abstraction from gamma-terpinene followed by protonation to produce 15. The presence of a 2-phenylethyl substituent in 13b and 37a or a 2-methylphenyl substituent in 37b also allowed the resulting intermediates to be captured intramolecularly either as biradicals or as zwitterions, producing 2(1H)-quinolinone 19, 2(1H)-pyridone 39, and benzopyranopyridine 43, respectively. On the other hand, with a 2-methoxyphenyl, a 2-(dimethylamino)phenyl, or a 3-methoxypropyl substituent, the chemical behavior of the cycloaromatized adduct could be best accounted for in terms of a zwitterionic intermediate leading to benzofuro[3,2-c]quinolin-6(5H)-one (20), 5,11-dihydro-11-methyl-6H-indolo[3,2-c]quinolin-6-one (25), benzofuro[3,2-c]pyridin-1(2H)-one 44, 2,5-dihydro-2,5-dimethyl-1H-pyrido[4,3-b]indol-1-one 46, and related compounds. Interestingly, thermolysis of 37f bearing a 2-(methoxymethyl)phenyl substituent at the alkynyl terminus produced the unexpected benzopyranopyridine 56 as the major product in a process involving the cleavage of the bond between the methoxyl oxygen and the adjacent methylene carbon. The efficiency and selectivity of the cycloaromatization reaction could also be enhanced by the introduction of 1.1 to 10 equiv of dimethylphenylsilyl chloride to the reaction mixture to capture the resulting zwitterion.     

Reversible polymerization driven by folding

Bisfunctionalized m-phenylene ethynylene imine oligomers were polymerized in the polar solvent acetonitrile, resulting in high-molecular weight poly(m-phenylene ethynylene imine)s. It is hypothesized that this polymerization, which proceeds through the reversible metathesis of imine bonds, is driven by the folding of the long m-phenylene ethynylene imine chains. Upon conducting the polymerization in a series of solvents in which the m-phenylene ethynylene oligomers exhibit different folding stabilities, it was possible to correlate the molecular weight of the resulting poly(m-phenylene ethynylene imine)s with the helical stability of the corresponding oligomers. The polymerization was also demonstrated to be reversible and responsive to solvent and temperature changes.     

Highly efficient nitration of phenolic compounds in solid phase or solution using Bi(NO3)3.5H2O as nitrating reagent

[reaction: see text] Bi(NO(3))(3).5H(2)O was used as an efficient nitrating reagent in the nitration of phenolic compounds to give nitrated phenols in good to high yields. The nitration reaction proceeded smoothly by grinding 1 equiv of phenol, 2-methylphenol, 4-methylphenol, or 4-chlorophenol and Bi(NO(3))(3).5H(2)O, and the nitration of other phenolic compounds could be performed in acetone at ambient temperature (22-30 degrees C).