消息重复型ARINC429总线事件消息包机载实时处理技术研究

ARINC429总线广泛应用于民用飞机中,在飞行试验中,消息重复型ARINC429事件信息的实时监控占用很大的遥测带宽资源;采用机载嵌入式数据处理模块,通过将其嵌入到机载测试系统中,通过采集器底板总线获取ARINC429采集模块采集到的数据,对飞机事件信息进行解析处理,并将处理结果通过遥测系统遥测下传至地面监控中心,大大降低了遥测带宽需求,对于飞行试验实时安全监控有重要意义。     

基于磁偶极子构造法几何建模的铁管磁异常正演

地下铁磁性金属管线受地球原磁场磁化产生磁场会改变原地磁场分布,而形成地磁异常;通过管道几何建模和磁偶极子构造法对管道磁异常进行正演分析;首先利用近似的立方体单元对管道进行几何建模并输出相应的立方体单元体积和中心坐标;然后将立方体单元近似为磁偶极子,使用磁偶极子构造法进行管道磁异常正演;最后研究了距径比,磁倾角,磁偏角,地球场强,管道材料磁化率对管道磁异常正演的影响;研究结果表明:在6倍距径比外,同一球面上测点磁异常值接近一致, 且管道磁异常正演结果不受磁倾角,磁偏角和材料磁化率的影响;随着地磁场强度增大,管道磁异常呈线性增大;研究成果将为自主研发高精度磁异常地下管线探测设备奠定理论基础。     

The Design of Single Mode Large Cross-section Glass-based Waveguides for Photonic Integrated Circuits

This paper presents our recent simulation results and novel designs of single mode large cross-section glass-based waveguides for photonic integrated circuits (PICs). Simulations were performed using an in-house Finite Difference (FD) based mode solver and the FD Beam propagation Method (FD-BPM). Our simulation results show that this innovative technology could provide a simplified means to couple optical energy efficiently between optical components in a single chip. This would provide the base for the future large-scale integration of optical components in PICs. The novel idea of using single mode large cross-section glass-based waveguides as an optical integration platform is an evolutionary innovative solution for the monolithic integration of optical components, in which the glass-based structures act both as waveguides and as an optical bench for integration. This allows easy and efficient optical coupling between optical components and optical fibres, removing costly and tedious alignment problems and considerably reducing optical coupling losses in PICs. We expect that the glass-based waveguide PICs technology will enable the emergence of a new generation of compact, reliable, high speed, and multifunctional devices.     

Microwave synthesis of magnetic Fe3O4 nanoparticles used as a precursor of nanocomposites and ferrofluids

Methods to synthesize magnetic Fe₃O₄ nanoparticles and to modify the surface of particles are presented in the present investigation. Fe₃O₄ magnetic nanoparticles were prepared by the co-precipitation of Fe³⁺ and Fe²⁺, NH₃·H₂O was used as the precipitating agent to adjust the pH value, and the aging of Fe₃O₄ magnetic nanoparticles was accelerated by microwave (MW) irradiation. The obtained Fe₃O₄ magnetic nanoparticles were characterized by Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), X-ray powder diffraction (XRD) and vibrating sample magnetometer (VSM). The average size of Fe₃O₄ crystallites was found to be around 8–9 nm. Thereafter, the surface of Fe₃O₄ magnetic nanoparticles was modified by stearic acid. The resultant sample was characterized by FT-IR, scanning electron microscopy (SEM), XRD, lipophilic degree (LD) and sedimentation test. The FT-IR results indicated that a covalent bond was formed by chemical reaction between the hydroxyl groups on the surface of Fe₃O₄ nanoparticles and carboxyl groups of stearic acid, which changed the polarity of Fe₃O₄ nanoparticles. The dispersion of Fe₃O₄ in organic solvent was greatly improved. Effects of reaction time, reaction temperature and concentration of stearic acid on particle surface modification were investigated. In addition, Fe₃O₄/polystyrene (PS) nanocomposite was synthesized by adding surface modified Fe₃O₄ magnetic nanoparticles into styrene monomer, followed by the radical polymerization. The obtained nanocomposite was tested by thermogravimetry (TG), differential scanning calorimetry (DSC) and XRD. Results revealed that the thermal stability of PS was not significantly changed after adding Fe₃O₄ nanoparticles. The Fe₃O₄ magnetic fluid was characterized using UV–vis spectrophotometer, Gouy magnetic balance and laser particle-size analyzer. The testing results showed that the magnetic fluid had excellent stability, and had susceptibility of 4.46×10⁻⁸ and saturated magnetization of 6.56 emu/g. In addition, the mean size d (0.99) of magnetic Fe₃O₄ nanoparticles in the fluid was 36.19 nm.     

弯曲波导之间的耦合分析

采用极坐标下的光束传播法分析了两条平行变曲波导的中心间距、曲率半径等因素对模式耦合的影响,得到了耦合长度、耦合强度随中心间距、曲率半径的变化规律,并将直波导作为变曲波导的一种特殊情况进行了分析.     

Single-mode rib polymer waveguides and electro-optic polymer waveguide switches

Mode-matching and effective index methods are used to analyze single-mode operation of optical rib polymer waveguides. Their single-mode waveguiding conditions are determined. Single-mode rib waveguides fabricated from guest–host polyetherketone are presented. The estimated propagation loss of straight rib-waveguides is 0.7 dB/cm at 1.55 μm. Furthermore, by using the mode field-transfer matrix method, 2×2 and 4×4 polymer Mach–Zehnder interference switch operating at 1.55 μm wavelength has been designed based on optical multi-mode interference.     

塑料脱模剂一组分的光谱分析

柱层析色谱分离性能优良的新型塑料脱模剂，纯化后得一主要未知组分。用元素分析、红外光谱、核磁共振氢谱研究其结构特征，对其盐酸酸化前后红外光谱吸收峰及核磁带进行了归属分析并确定结构。结果表明，该组分为一表面活性剂N，N-二羟乙基十二烷基胺。这为新型脱模剂的产品开发提供了依据。     

基于随机并行梯度下降算法的光束相干合成技术

介绍了随机并行梯度下降算法的基本原理,对算法流程进行了仿真验证,并对其中随机扰动幅度和增益系数两个关键参数进行了仿真分析。分析结果表明,这两个参数存在一个最适区间,只有在此区间内取值时算法才能有效收敛。以仿真分析为依据开展了光纤激光的相干合成实验,结果表明光束相干合成效果显著,有效地验证了仿真分析的结果。     

电磁波在大气层人造等离子体中的衰减特性

利用洛沦兹模型来研究大气层人造非均匀等离子体的电磁响应特性,讨论了电磁波频率、等离子体密度及电子碰撞频率对电磁波衰减特性的影响.结果表明,电磁波在长波长区域及等离子体密度大时,其能量衰减越快.当等离子体密度高时,电子温度越低,大气层高度越高,电磁波的能量衰减越快. 关键词： 电磁波 大气等离子体 能量衰减     

水中脉冲放电的电特性与声辐射特性研究

对水中脉冲放电等离子体通道电阻与放电参数之间的关系作了研究,得到了等离子体通道电阻与电容量、初始电压、电极间距离的关系,以及通道电阻随时间的变化规律.还对冲击波的峰值压力与放电参数间的关系作了研究,并对冲击波压力的功率谱作了分析,结果表明水中脉冲放电所产生的冲击波的声辐射频率在几十赫兹到几万赫兹之间,覆盖了所有水声设备的工作频率,且在低频段具有很强的声功率,是一种理想的水下声源 关键词： 水中脉冲放电 等离子体