An Electrochemical Way to Generate Amphiphiles from Hydrazones for the Synthesis of 1,2,4-Triazole Scaffold Cyclic Compounds

An electro-oxidative cyclization pathway in which hydrazones are selected as starting materials to generate amphiphiles by reacting with benzylamines and benzamides was reported. This strategy successfully prepared a series of 1,2,4-triazoles in satisfactory yields. Moreover, the use of cheap stainless steel as the anode, the feasibility to conduct the transformation as a one-pot reaction and the proof that scaling-up these reactions is possible make this transformation attractive for potential application in industry.     

Adatom Defect Induced Spin Polarization of Asymmetric Structures

The spin polarization of carbon nanomaterials is crucial to design spintronic devices. In this paper, the first-principles is used to study the electronic properties of two defect asymmetric structures, Cap-(9, 0)-Def [6, 6] and Cap-(9, 0)-Def [5, 6]. We found that the ground state of Cap-(9, 0)-Def [6, 6] is sextet and the ground state of Cap-(9, 0)-Def [5, 6] is quartet, and the former has a lower energy. In addition, compared with Cap-(9, 0) CNTs, the C adatom on C₃₀ causes spin polarization phenomenon and Cap-(9, 0)-Def [6, 6] has more spin electrons than Cap-(9, 0)-Def [5, 6] structure. Moreover, different adsorb defects reveal different electron accumulation. This finding shows that spin polarization of the asymmetric structure can be adjusted by introducing adatom defects.     

Cucurbit[8]uril-induced diarylethene thermally activated delay fluorescence supramolecular switch for sequential energy transfer

Constructing molecular switches based on supramolecular assembly strategy is a research hotspot. In this work, we constructed an all visible-light-regulated supramolecular photo-switch based on pyridinium-modified diarylethene derivative (DTE-Me) and cucurbit[8]uril (CB[8]). CB[8] not only accelerated the photochromic process under 365 nm ultraviolet light but also shifted the absorption of open formed DTE-Me to the visible region, which led to efficient photocyclization under 450 nm visible light irradiation, while DTE-Me and DTE-Me/CB[7] remained unchanged under the same irradiating condition. Moreover, the complexation with CB[8] could induce the strong thermally activated delayed fluorescence (TADF) of guest molecular at 550 nm, which further shifted to 670 nm through two-step sequential energy transfer with sulforhodamine B (SRB) and Cy5. This energy transfer process could also be regulated with visible light, and the application for information encryption was also demonstrated. This assembly provides a convenient approach to construct all visible light-regulated TADF photo-switch.     

Controlled electropolymerization based on self-dimerizations of monomers

Electropolymerization is one of the most important methodologies to synthesize and develop conducting polymers. The complexity of the polymerization mechanism, ion doping processes and structural defects are considered to be symbiotic and unavoidable, making the stagnant state and huge band gap with advanced interdisciplinary research fields and important applications in the last three decades. Herein, we provide a point of view into controlled electropolymerization by regioselective activation reactions of monomers, where self-dimerizations instead of self-electropolymerizations were utilized. The resulting dimers play a role in the connections between functional building blocks to form functional polymers on demand. This account highlights the typical findings in controlled electropolymerizations as a forum for discussing new opportunities in exploiting novel designs and applications.     

A cost-effective anionic flocculant prepared by grafting carboxymethyl cellulose and lignosulfonate with acrylamide

How to efficiently utilize most abundant biomass of cellulose, lignin and their derivatives has become an emerging challenge as the anticipative oil depletion. In this paper, the ternary anionic copolymer of carboxymethyl cellulose-acrylamide-lignosulfonate (CAL) was successfully prepared by hydrothermal polymerization. Based on the flocculation characteristics of cationic methylene blue, the optimal polymerization process was confirmed as the raw material ratio of 1:1:1, initiator dosage of 0.9 wt %, the reaction time was 5 h and the reaction temperature was 55 °C. The results showed that the decolorization ratio was 87.5% at the CAL dosage of 600 mg/L for the 500 mg/L methylene blue simulated wastewater. The CAL achieved fast flocculation kinetics and super color removal ratios in the wide ranges of environmental pH, temperature and salt concentration. The flocculation mechanism is single charge neutralization. Moreover, the estimated treatment cost of CAL is 68.3% lower than that of commercial anionic PAM. The prepared anionic CAL flocculant has the characteristics of environmental safety, excellent flocculation performance and cost-effectiveness, which shows great potential in the field of dye wastewater treatment, and also provides a feasible way for the effective utilization of biomass resources.

     

Dyeing behavior and mechanism of Crocein Orange G on carboxymethyl cotton fabric

Cellulose - Traditional cotton fiber dyeing requires an abundance of salt, which leads to environmental pollution. Consequently, decreasing or eliminating the use of salt has become the primary...     

Generation and Identification of the Linear OCBNO and OBNCO Molecules with 24 Valence Electrons

Two structural isomers containing five second-row element atoms with 24 valence electrons were generated and identified by matrix-isolation IR spectroscopy and quantum chemical calculations. The OCBNO complex, which is produced by the reaction of boron atoms with mixtures of carbon monoxide and nitric oxide in solid neon, rearranges to the more stable OBNCO isomer on UV excitation. Bonding analysis indicates that the OCBNO complex is best described by the bonding interactions between a triplet-state boron cation with an electron configuration of (2s)⁰(2p_σ)⁰(2p_π)² and the CO/NO⁻ ligands in the triplet state forming two degenerate electron-sharing π bonds and two ligand-to-boron dative σ bonds.     

Cationic and temperature-sensitive liposomes loaded with eugenol for the application to silk

Silk has been widely used in the clothing industry due to their soft and smooth features, good biocompatibility, good heat dissipation, warmth and ultraviolet resistance. The application of fragrance to silk can significantly improve the performance of silk. However, there are two key scientific problems that need to be solved: slowing down the release rate of fragrances and increasing the scent lasting time of silk. In this study, cationic and temperature-sensitive liposomes were designed and prepared to encapsulate eugenol. These fragrance-loaded liposomes significantly slowed down the release rate of the fragrance and controlled the release rate of the fragrance in a thermo-sensitive manner. The liposomes adhered to the silk through electrostatic adsorption interaction. The positive charge on the fragrance-loaded liposomes neutralized much negative charge on silk and thereby increasing the adhesion efficiency.     

Encapsulation of Phosphomolybdate Within Metal–Organic Frameworks with Dual Enzyme-like Activities for Colorimetric Detection of H2O2 and Ascorbic acid

Developing artificial enzyme mimetics for the detection of small biomolecules are a current research interest because natural enzymes bear some serious disadvantages, such as their catalytic activity can be easily inhibited and they can be digested by proteases. Herein, a heteropoly acids (HPA) encapsulating metal–organic framework (MOF) with metal-carbene structure, [Cu₁₀(H₃trz)₄(Htrz)₄][PMo₁₂VO₄₁] (PMA-MOF) as bifunctional enzyme-mimetic catalyst for colorimetric detection of hydrogen peroxide (H₂O₂) and ascorbic acid (AA) was designed and synthesized. Thanks to the good stability and the synergistic effect of PMA and MOF, PMA-MOF exhibits the lower limit of detection (0.222 μM towards H₂O₂ and 0.0046 μM to AA), and the smaller Km value (0.0138 mM for H₂O₂ and 0.136 mM for o-phenylenediamine) compared to most reported MOF- and HPA-based enzyme-mimetic catalyst, to the best our knowledge.

     

Syntheses,Structural Characterization of Two Cobalt Coordination Polymers Composed of Isophthalate and Bis(4-(1H-imidazol-1-YL)phenyl)methanone Ligands

Russian Journal of Coordination Chemistry - Two 2D cobalt complexes, namely {[(Bipmo)2Co2(Ipa)2](DMF)]·2.25H2O}n (I), {[(Bipmo)-Co(Ipa)]·2H2O}n (II), have been constructed solvothermally...