微纳光纤布拉格光栅折射率传感特性研究

利用光纤布拉格光栅方程和光纤基模有效折射率随纤芯半径和环境折射率的函数关系, 建立了微纳光纤布拉格光栅(MNFBG)反射波长随环境折射率变化的数学模型, 给出了波长灵敏度函数, 并指出MNFBG反射波长的变化规律决定于有效折射率随纤芯半径和环境折射率变化的关系. 详细探究了有效折射率及其灵敏度的变化规律, 结果表明: 有效折射率随纤芯半径和环境折射率的减小而非线性减小, 其对环境折射率变化的灵敏度随环境折射率的增大而非线性增加, 而且随纤芯半径减小, 有效折射率的灵敏度、线性度以及线性响应范围均呈递增规律. 通过对纤芯半径为0.5 μm的MNFBG在1.20–1.30和1.33–1.43 环境折射率范围内的波长响应关系拟合, 分别获得了477.33 nm/RIU和856.30 nm/RIU的波长灵敏度以及99.58 %和99.7%的高线性度, 论证了分析结论以及折射率区间划分测量方案的正确性, 为MNFBG折射率传感器的设计、优化以及应用提供了参考依据. 关键词： 微纳光纤 光纤布拉格光栅 折射率传感 数值模拟     

环境扫描电镜及其应用

叙述了环境扫描电镜（ＥＳＥＭ）的成像原理———电子信号气体放大原理及其与常规扫描电镜（ＳＥＭ）的区别，介绍了我国第一台带高温台的ＥＳＥＭ．综述了近年来国外学者应用ＥＳＥＭ开展的一些研究工作．介绍了中国科学院化工冶金研究所应用ＫＹＫＹ１５００型ＥＳＥＭ对金属表面氧化反应中晶须／晶粒生长过程的研究     

Enzymatic Synthesis of a Diastereomer of Neoabyssomicin Derivative Using the Diels-Alderase AbyU

Main observation and conclusion The enzyme AbyU catalyses a Diels-Alder (DA) reaction during abyssomicin C biosynthesis.In this study,AbyU is shown to convert t...     

Depressing defocusing effect in microscopy by bi-orthogonal wavelet transform

For different dimensions, heights and irregular shapes, small and large particles cannot be viewed simultaneously as sharp images under the microscope due to optical defocusing effects. Bi-orthogonal wavelet transform is used in this paper to depress such defocusing effect by merging the wavelet coefficients of the image series. The algorithm is presented in detail, using SWE(13,7) and CDF(2,2), and a few particle images are provided to validate the proposed method.     

Effect of graft polymer prepared by living radical polymerisation on electro-optical properties of polymer dispersed liquid crystal

In this study, a graft polymer matrix prepared by living radical polymerisation had been incorporated into polymer dispersed liquid crystals (PDLCs). The electro-optical properties of the PDLCs were investigated. The results showed that the length and density of graft chain had a great influence on the memory effect of the PDLCs. Low-driving-voltage and weak-memory-effect PDLCs could easily be obtained with a graft polymer matrix.     

Simulation of Three-Spin Interaction in Coupled Cavities Chain

We generalize usual second-order effective Hamiltonian approximation into third-order. Employing the generalized method, we propose a scheme to generate three-spin interaction using coupled cavity chain. We show that the third order term not only improves two parties interaction but also induces direct three-spin interaction which has not been simulated before. By controlling the frequency of laser field, one can obtain next nearest neighbor interaction on the same order with the nearest neighbor’s or the three-spin interaction on the same order as next nearest neighbor’s.     

Study on viscoelastic properties of epoxidized trans-1,4-polyisoprene by rubber process analyzer

Two kinds of epoxidized trans-1,4-polyisoprene (ETPI) were prepared by surface selective epoxidation which products named as SETPI and solution random epoxidation which product named as RETPI, respectively. The viscoelastic behavior of unmodified trans-1,4-polyisoprene (TPI) and ETPI, both RETPI and SETPI, was studied with the use of a rubber process analyzer (RPA). The strain sweep, frequency sweep, temperature sweep and stress sweep indicated that the SETPI could be seen as a blend of the pure ETPI and TPI. The rheological behavior of TPI and ETPI was recorded by two kinds of shear rate. An obvious effect of epoxidation on the movement behavior of the melt of RETPI was observed. However, the effect of epoxy content of SETPI on ln??* is weak. The complex viscosity at various frequencies of SETPI is higher than that of RETPI.     

Effect of rGO on polymer-dispersed liquid crystal fabricated by RAFT polymerisation

In this study, we demonstrated that doping polymer matrix with a small amount of reduced graphene oxide (rGO) component (0.05–0.2%) had significant influence on the polymerisation kinetics and electro-optical performances of polymer-dispersed liquid crystal films (PDLCs) fabricated with macro reversible addition-fragmentation chain transfer agents. The effects of rGO content were studied in terms of morphology, compound viscosity, polymer conductivity, polymerisation kinetics and driving voltage of PDLCs. The results exhibited that higher rGO content increased the compound viscosity and the entire process proceeded slowly. Furthermore, the addition of rGO increased the polymer conductivity and local electric field, and reduced the saturation voltage as well as the threshold voltage from 27.3 to 19.5 V and 13.2 to 6.41 V, respectively.