η6-苊烯三羰基铬配合物的合成、结构及光谱性质研究

采用苊烯配体与三胺基三羰基铬在四氢呋喃中回流反应,合成了η6-苊烯三羰基铬配合物.通过元素分析、IR、1HNMR、13CNMR、MS和X射线单晶衍射对其结构进行了表征,比较了标题配合物与其自由配体的光物理行为.晶体结构分析表明,标题配合物属单斜晶系,空间群P21/c,Z=4,a=0.8719(7)nm,b=1.2436(10)nm,c=1.1504(9)nm,β=111.835(13)°,Cr(CO)3基团可与苊烯配体中的2个苯环中的任意一个配位,形成2个异构体(R,S),并以1:1的比例在其晶胞单元中反向面对面堆积,这种异构体共存于晶体中归属于Cr(CO)3基团在配体芳环之间的配位移动重排(IRHRs).     

Effect of the polarity of additional solvent on membrane formation in polysulfone/N-methyl-2-pyrrolidone/water ternary system

Asymmetric polysulfone membranes were prepared by wet phase inversion method with different demixing rate of casting solutions. The influent factor of demixing rate was focused on the polarity of additive in the polysulfone/N-methyl-2-pyrrolidone/water ternary system. With increasing the polarity of alcohols in the casting solution, the decrease in skin layer thickness was observed and then a poor separation performance of membranes can be obtained. It was found that the polar additive caused the rapidly demixing of casting solution in coagulation bath and formed porous asymmetric membranes with defective skin layer. In the other case, chloroform was used as the non-polar additive in casting solution. With increasing the mount of chloroform in the casting solution, the increase in skin layer thickness was observed and then lead to a good separation performance of these membranes. It was found that of the non-polar additive delays the demixing rate of casting solution in this ternary system. The separation performance of these asymmetric membranes were characterized by the measurement of dehydration of ethanol/water mixture by pervaporation and observed the morphology by scanning electron microscopy. It was found that the separation performance of asymmetric polysulfone membrane strongly depends on the polarity of adding solvent in polysulfone/N-methyl-2-pyrrolidone/water ternary system.     

Arylcarbamoylated allylcarbamido-β-cyclodextrin: synthesis and immobilization on nonfunctionalized silica gel as a chiral stationary phase

Four new chiral stationary phases based on mono-(6^A-allylcarbamido-6^A-deoxy)-arylcarbamoylated β-cyclodextrin were synthesized. The chiral stationary phase of phenylcarbamoylated β-cyclodextrin exhibited excellent separation capability for a variety of chiral compounds. Compared with the previous work, it was found that the spacer remained on the surface of the silica gel and decreased the enantioseparation capability.     

Polarographic Behaviour and Determination of Stability Constants of Uranyl-Ascorbate Complex

The complex species of UO₂(HA)(H₂A)⁺ and UO₂(HA)₂ were identified in the ascorbic acid solution of uranyl ion at pH<2.1 and pH>2.1, respectively. Polarographic wave was proved to be the simultaneous reduction of UO₂⁺² and UO₂(HA)(H₂A)⁺ at pH <2.1. However, at pH>2.1, the wave is due to the reduction of U0₂(HA)₂ The stability constants of the two complex species were found to be 5.1×10⁺ and 1.0×10⁵, respectively. The hydrolysis constant of uranyl ion in the solution of ascorbic acid was determined.     

Convenient synthesis of mono(6-N-allylamino-6-deoxy)permethylated β-cyclodextrin: a promising chiral selector for an HPLC chiral stationary phase

Mono(6-(p-toluenesulfonyl))permethylated β-cyclodextrin, a versatile precursor for a wide variety of mono-functionalized permethyl β-cyclodextrins, has been generated successfully by the direct methylation of monotosylated cyclodextrin. This afforded a convenient synthesis of mono(6^A-N-allylamino-6^A-deoxy)permethylated β-cyclodextrin. Hydrosilylation of the chiral selector with (EtO)₃SiH and reaction of the resultant reactive siloxane with pristine silica gel afforded a facile entry into a structurally well-defined chiral HPLC stationary phase.     

The Constituents of Cynanchum Taiwanianum

The isolation and identification of eleven crystalline components from the aerial part of Cynanchum taiwanianum Yamazaki (Asclepiadaceae) are described. Their structures were determined on the basis of spectral evidence and chemical transformation. Besides caffeic acid, β-amyrin, and methyl phaeophorbide a, the isolated flavonoid components are classified into two groups, i.e. kaempferol derivatives (kaempferol, astragalin, afzelin, trifolin) and quercetin derivatives (quercetin, isoquercitrin, quercitrin, hyperin).     

DNA-PROTEIN CROSSLINKING IN NORMAL HUMAN SKIN FIBROBLASTS EXPOSED TO SOLAR ULTRAVIOLET WAVELENGTHS

Three normal human skin fibroblast cell lines were exposed to the simulated solar UV radiation produced by a fluorescent sunlamp under conditions in which the wavelength components shorter than either 295, 305 or 315 nm were excluded. The level of DNA-protein crosslinks (DPC) was then measured in those cells using the alkaline elution technique either immediately after irradiation or following a 24 h incubation. In each case, cells were exposed to fluences that induce similar levels of DPC. For cells exposed to 10 kJ m(-2) of sunlamp UV > 295 nm, the level of DPC exhibited a 2-5-fold increase following incubation. In contrast, 40-100% of the DPC were removed upon incubation of cells irradiated with either 100 kJ m(-2) of sunlamp UV > 305 nm or 150 kJ m(-2) of sunlamp UV > 315 nm. A major difference between the effects induced by these wavelength regions is that, in addition to DPC, a very high level of pyrimidine dimers is also produced by sunlamp UV > 295 nm, whereas much lower dimer yields result from treatment with either sunlamp UV > 305 nm or sunlamp UV > 315 nm. A potential role for type II DNA topoisomerase in the formation of these DPC resulting from either the change in conformational structure caused by the presence of a high level of dimers or an involvement of this enzyme in dimer excision repair is discussed.     

Oxidative Addition vs. Ligand-Exchange: Fe(II)-Mixed-Phenylchalcogenolate Complexes fac-[PPN][Fe(CO)3(TePh)n(SePh)3-N] (n = 1, 2)

Diphenyldichalcogenides (PhE)₂ (E = Te, Se) react with Fe(0)-phenylchalcogenolate [PPN] [PhEFe(CO)₄] to yield the products of oxidative addition, Fe(II)-mixed-phenylchalcogenolate fac- [PPN][Fe(CO)₃(TePh)_n(ScPh)_3-n] (n = 1, 2). Reactions of [PPN][REFe(CO)₄] (E=Se, R=Me; E=S, R=Et) and diphenyldichalcogenides yielded ligand-exchange products [PPN][PhEFe(CO)₄] (E=Te, Se, S). The compounds [Fe(CO)₃(TePh)(ScPh)₂]^? (l) and [Fe(CO)₃(TePh)₂ (2) crystallize in the isomorphous monoclinic space group C_2/e, with a = 32.035(8), b = 11.708(6), c = 28.909(6) Å, Z = 8, R = 0.048, and R_w = 0.044 (1); with a = 32.089(5), b= 11.745(2), c = 28.990(8) Å, Z = 8, R = 0.048, and R_w = 0.048 (2). The complexes 1 and 2 crystallize as discrete cations of PPN⁺ and anions of [Fe(CO)₃(TcPh)_u(ScPh)_3-n] (n=1, 2), and one half solvent molecule THF. The geometry around Fe(II) is a distorted octahedron with three carbonyl groups and three phenylchalcogenolate ligands occupying facial positions.     

Kinetic and mechanistic studies of the copolymerization of bis-4-substituted-1,2,4-triazoline-3,5-diones with styrenes

Highly reactive 4-substituted-1,2,4-triazoline-3,5-diones (TDs) have been studied extensively as dienophiles, but little work has been done on their role as enophiles and particularly on their use as propagating species in polymerization studies. The copolymerization between bis-4-substituted-1,2,4-triazoline-3,5-diones (bis-TDs) and styrene has been reported. The purpose of the present work was to synthesize new copolymers derived from a variety of substituted styrenes and bis-TDs and to study the mechanism and kinetics of this novel polymerization. Three bis-TDs were prepared: 3,3′-dimethyl-4,4′-bis[3,5-dioxo-1,2,4-triazoline-4-yl] biphenyl (8), t-1,4-bis[3,5-dioxo-1,2,4-triazoline-4-yl] methyl cyclohexane (9), and 4,4′-bis[3,5-dioxo-1,2,4-triazoline-4-yl] phenyl ether (10). Their structures were fully established by spectroscopic studies, elemental analyses, and indirectly, their quantitative ene reactions with 2,3-dimethyl-2-butene. Copolymerization between bis-TDs and substituted styrenes was carried out in dimethylformamide (DMF), tetrahydrofuran (THF), or dichloroethane (DCE). Polymers formed were characterized by infrared (IR) and nuclear magnetic resonance (NMR) spectroscopy, differential scanning calorimetry (DSC), gel permeation chromatography (GPC), and viscometry. Molecular weights of polymers range from 5000 to 16,000 in most cases. They were stable up to 250°C and higher. Polymers derived from bis-TDs and p-t-butylstyrene, α-methylstyrene, p-nitrostyrene, and p-acetoxystyrene contained only Diels-Alder-ene (DAe) repeating units, whereas those derived from styrene, p-chlorostyrene, p-bromostyrene, p-methylstyrene, p-methoxystyrene, and 4-vinylbiphenyl contained both DAe and double Diels-Alder (dDA) repeating units. A kinetic study of the copolymerization of 4,4′-bis-(3,5-dioxo-1,2,4-triazoline-4-yl) phenyl ether with α-methylstyrene, p-t-butylstyrene, styrene, p-chlorostyrene, and p-nitrostyrene in DCE was carried out; the copolymerization rate constants were 60.9, 49.8, 8.4, 5.5, and 0.8 (1 mol^?1s), respectively.     

Solid-phase synthesis of imidazo[1,2-a]pyridine using sodium benzenesulfinate as a traceless linker

[formula: see text] The preparation of the first library of imidazo[1,2-a]pyridine derivatives on a solid support is described. A sulfone linker strategy was applied in the synthesis. Key steps involved in the solid-phase synthetic procedure include (i) alpha-haloketone resin formation by sulfinate-->sulfone alkylation, (ii) imidazo[1,2-a]pyridine ring formation by treatment with 2-aminopyridine, (iii) sulfone anion alkylation, and (iv) traceless product release by oxidation-elimination. A library of 12 imidazo[1,2-a]pyridines was synthesized.