Separation of metal ions by capillary electrophoresis

A number of experimental parameters have been optimized for the separation of 26 metal ions, including alkali, alkaline earth, transition and lanthanide metal ions. Experimental parameters that were evaluated included nature of indirect-detection reagent, pH of electrolyte, concentration of complexing agent and nature of the surface of the capillary; unbonded and C₁ and C₁₈ bonded phases were studied. In addition the effect of internal diameter on linearity and signal-to-noise ratio was examined, and separation efficiency was determined for a variety of experimental conditions. Detection limits (signal-to-noise RATIO = 3) were ca. 1 μg/ml for the lanthanides, ca. 0.6 μg/ml for transition and alkaline earth ions and ca. 0.1–0.8 μg/ml for alkali metal ions. The average relative standard deviations of were 3.7, 5.1 and 2.5% on unbonded, C₁ and C₁₈ capillaries, respectively. Whereas conventional regression analysis suggested that the calibration curves were linear over the range of 1·10⁻⁵ to 4·10⁻⁴ mol/l, sensitivity plots showed that the results were actually linear to within 6% only over the range of 2.5·10⁻⁵ to 4·10⁻⁴ mol/l.     

CSE-MECC two-dimensional capillary electrophoresis analysis of proteins in the mouse tumor cell (AtT-20) homogenate

Two-dimensional capillary electrophoresis was used for the separation of proteins and biogenic amines from the mouse AtT-20 cell line. The first-dimension capillary contained a TRIS–CHES–SDS–dextran buffer to perform capillary sieving electrophoresis, which is based on molecular weight of proteins. The second-dimension capillary contained a TRIS–CHES–SDS buffer for micellar electrokinetic capillary chromatography. After a 61-s preliminary separation, fractions from the first-dimension capillary were successively transferred to the second-dimension capillary, where they further separated by MECC. The two-dimensional separation required 60 min.     

A theoretical study of five nitrates: Electronic structure and bond dissociation energies

Three density-functional methods (B3P86, B3PW91, and B3LYP) are employed to investigate the O–NO₂ bond lengths, frontier orbital energies, and O–NO₂ bond dissociation energies (BDEs) of n-propyl nitrate (NPN), isopropyl nitrate (IPN), 2-ethylhexyl nitrate (EHN), triethylene glycol dinitrate (Tri-EGDN), and tetraethylene glycol dinitrate (Tetra-EGDN). It is found that the O–NO₂ bond lengthens (destabilizes) in the order of IPN, NPN, EHN, Tetra-EGDN, and Tri-EGDN. From the data of frontier orbital energies (E_HOMO, E_LUMO), and energy gaps (ΔE), we estimate the relative thermal stability ordering of five nitrates and their corresponding radicals. The predicted BDEs of O–NO₂ bond in NPN, IPN, EHN, Tri-EGDN, and Tetra-EGDN, are 176.6, 174.5, 168.1, 156.1, and 159.3 kJ mol⁻¹, respectively. Based on the finding that the present results of BDEs are well coincident with the experimental results of apparent activation energies from the literature, we can draw a conclusion that the experimental thermolysis of five nitrates is only unimolecular homolytical cleavage of the O–NO₂ bonds.     

New unsaturated polyesters as injectable drug carriers

New unsaturated polyesters of poly(fumaric acid-glycol-sebacic acid) copolymers and poly(maleic anhydride-glycol-sebacic acid) copolymers were prepared by melt polycondensation of the corresponding mixed monomers: sebacic anhydride, fumaric acid or maleic anhydride and glycol. Methyl-methacrylate (MMA) was used as crosslinker and dimer acid was used as thinner.In vitro studies showed that those copolymers are degradable in phosphate buffer at 37 °C and poly(fumaric acid-glycol-sebacic acid) has proper drug release rate as drug carriers. The biocompatibility of poly(fumaric acid-glycol-sebacic acid) copolymers under mice skin was also evaluated; macroscopic observation and microscopic analysis demonstrated that the copolymer is biocompatible and well tolerated in vivo. The injected poly(fumaric acid-glycol-sebacic acid) [molar ratio M_{fumaric acid}:M_glycol:M_{sebacic acid} = 1.75:2.20:0.25] containing 5% adriamycin hydrochloride (ADM) in the mice bearing Sarcoma-180 tumor exhibited a good antitumor efficacy. The volume doubling time (VDT) (18 ± 2.5 days) of the tumor growth by this treatment was longer than that (7 ± 0.9 days) by the subcutaneous injection of ADM.     

Dispersion state of CuO on CeO2

XRD and XPS are used to study the dispersion state of CuO on ceria surface. The dispersion capacity values of CuO measured by the two methods are consistent, which are of 1.20 mmol CuO/100 m² CeO₂. In addition, the results reveal that highly dispersed Cu²⁺ ions are formed at low CuO loadings and that increasing the CuO content to a value higher than its dispersion capacity produces crystalline CuO after the surface vacant sites on CeO₂ are filled. The atomic composition of the outermost layer of the CuO/CeO₂ samples has been probed by using static secondary ion mass spectroscopy (SSIMS), and the ratim of Cu/Ce are found to be 0.93 and 0.46 for the 1.22 and 0.61 mmol CuO/CeO₂ samples respectively. Temperature-programmed reduction (TPR) profile with two reduction peaks at 156 and 165°C suggests that the reduction of highly dispersed Cu²⁺ ions consists of two steps and is easier than that of CuO crystallites, in which the TPR profile has only one reduction peak at about 249°C. The above experimental results are in good agreement with the prediction of the incorporation model. Project supported by the National Natural Science Foundation of China.     

Engineering of Cardiotoxin by Chemical Synthesis: (I) Rapid Synthesis of Fully Active Cardiotoxin II and IV of Taiwan Cobra Venom

Two 60-residue snake toxins with four disulfide bridges, cardiotoxin II and IV, of Taiwan cobra (Naja naja atra) have been rapidly prepared in overall yields of 3.9% (cardiotoxin II) and 3.7% (cardiotoxin IV) within three weeks using the chemical method. Physicochemical characterization of these synthetic cardiotoxins was carried out by amino acid analysis, mass spectroscopy, capillary electrophoresis, peptide mapping, circular dichroism spectroscopy, and lethal toxicity. As compared with natural cardiotoxins, the results indicated that the synthetic cardiotoxins possessed the same physicochemical properties as those of natural ones. Therefore, in addition to preparation of various important toxins with satisfactory quantities for biochemical and pharmacological studies within a short lime, this rapid method also provides an important route to obtain many interesting toxins and designed toxin analogues for structure/function relationship studies in the near further.     

盐类对4-氯-4′-羟基二苯砜钾盐真空熔融聚合的影响

聚苯砜醚是一种综合性能比较好、可在180℃长期使用的热塑性工程塑料,在国内外受到一定的重视。我们与武汉化工原料厂协作,对4-氯-4′-羟基二苯砜钾盐真空熔融缩聚合成聚苯砜醚的途径进行过一些探索,得到了较好的结果。但是,在实践中发现,由于这一反应速度快,放出的热量大而集中,在真空中聚合热不易导出,随着单体用量     

Glycoprotein adsorption into bilirubin/cholesterol mixed monolayers at the air-water interface

The adsorption of α₁-acid glycoprotein into bilirubin/cholesterol mixed monolayers with various component molar ratios is investigated using surface pressure-area (π-A) isotherms and (dπ/dA)-A curves. The results showed that the surface area per molecule increased after the adsorption/insertion of glycoprotein molecules into the monolayers. The compressibility of mixed monolayers increased as a result of hydrogen bonding between bilirubin and glycoprotein molecules, while the interactions between bilirubin and cholesterol are weakened. The adsorption of glycoprotein into a monolayer induced changes in molecular surface area depending on the surface pressure and molar fraction of bilirubin. The transmission electron microscopy of mixed monolayers confirmed the insertion of glycoprotein particles of spherical shape with an average diameter of about 80 nm into the monolayer. The text was submitted by the authors in English.     

Microwave-assisted intramolecular [2 + 2] Allenic cycloaddition reaction for the rapid assembly of bicyclo[4.2.0]octa-1,6-dienes and bicyclo[5.2.0]nona-1,7-dienes

Microwave irradiation of alkynyl allenes affords an intramolecular [2 + 2] cycloaddition reaction. This cycloaddition provides an efficient route to bicyclomethylenecyclobutenes. The reaction occurs with complete regioselectivity for the distal double bond of the allene for the selective formation of a variety of hetero- and carbocyclic substrates. Bicyclo[4.2.0]octadienes and bicyclo[5.2.0]nonadienes have been prepared in high yield. [reaction: see text]     

Aging of poly(2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylenevinylene)/toluene solutions and subsequent effects on luminescence behavior of cast films

Morphological effects in luminescence properties of a representative semiconducting polymer, poly(2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylenevinylene) (MEH-PPV), has recently attracted much attention. Previous studies indicated that short-term heat treatment of solution-cast MEH-PPV films may result in the formation of mesomorphic order that is responsible for the "red" emission around 640 nm, in contrast to the single-chromophore "yellow" emission near 590 nm from the disordered matrix. On the basis of microscopic and spectroscopic evidence for films cast from freshly prepared and aged solutions, here we show that prolonged storage of MEHyellowPPV solutions at room temperature or lower may result in retardation of the thermally induced mesophase formation in the subsequently cast films. According to small-angle neutron scattering and differential scanning calorimetric observations over aged MEH-PPV/toluene solutions, we propose that the suppressed transformation into mesomorphic order is due to further development of nanocrystalline aggregates that serve as physical cross-links among MEH-PPV chains in the solution state upon long-term storage. These solvent-induced nanocrystalline aggregates, however, do not exhibit new spectroscopic features beyond the suppression of "red" emission at 640 nm from the mesomorphic phase.