可见/近红外光谱分析技术快速鉴别航天育种番茄

提出了利用可见/近红外光谱技术快速无损鉴别航天育种番茄品种的方法,采用偏最小二乘法对光谱特征信息进行提取,与神经网络结合建立番茄品种的鉴别模型.该模型将提取后的主成分作为神经网络的输入,加速了神经网络的训练速度.同时采用小波变换对大量光谱数据进行压缩,并结合神经网络建立番茄品种鉴别模型,该模型将压缩后的数据作为神经网络...     

Characterization and activity of visible-light-driven TiO2 photocatalyst codoped with lanthanum and iodine

The novel visible-light-activated La/I/TiO₂ nanocomposition photocatalyst was successfully synthesized using precipitation-dipping method, and characterized by X-ray powder diffraction (XRD), the Brunauer-Emmett-Teller (BET) method, transmission electron microscopy (TEM), thermogravimetry-differential scanning calorimetry (TG-DSC) and UV-vis diffuse reflectance spectroscopy (UV-vis DRS). The photocatalytic activity of La/I/TiO₂ was evaluated by studying photodegradation of reactive blue 19 as a probe reaction under simulated sunlight irradiation. Photocatalytic experiment results showed that the maximum specific photocatalytic activity of the La/I/TiO₂ photocatalyst appeared when the molar ratio of La/Ti was 2.0 at%, calcined at 350 °C for 2 h, due to the sample with good crystallization, high BET surface area and small crystal size. Under simulated sunlight irradiation, the degradation of reactive blue 19 aqueous solution reached 98.6% in 80 min, which showed La/I/TiO₂ photocatalyst to be much higher photocatalytic activity compared to standard Degussa P25 photocatalyst. The higher visible light activity is due to the codoping of lanthanum and iodine.     

Theory of modified thermally stimulated current and direct determination of trap level distribution

In order to investigate the trap level distribution in polymer films, a new method is proposed based on modified thermally stimulated current (TSC) theory and numerical calculation of the TSC measurement. In this method, a new function is defined to weight the contribution of every trap level to the external current. The demarcation energy is used to study the trap emptying process. The modified TSC theory shows that only the electrons with trap levels very close to the demarcation energy can significantly contribute to the external circuit at any instant temperature. Based on this method, the trap level distribution of the DuPont original polyimide film 100HN and nanocomposite polyimide film 100CR are investigated as an application example. The effectiveness of the method is confirmed by the experiments. The experimental results show that the trap level density in the 100CR PI films is about six times larger than that in the 100HN PI films through the investigated trap level ranges 06–1.3 eV. The increased traps in 100CR should be introduced by nanofillers, probably come from the interfaces formed between nanofillers and the polymer matrix.     

Main Q-eigenvalues and generalized Q-cospectrality of graphs

Let Q ^G denote the signless Laplacian matrix of a graph G. An eigenvalue μ of Q ^G is said to be a main Q-eigenvalue of G if μ has an eigenvector which is not orthogonal to an all-ones vector e. We give some basic properties of main Q-eigenvalues. For a graph G of order n, G is called Q-controllable if G has n distinct main Q-eigenvalues. We show that a graph H is generalized Q-cospectral with a Q-controllable G if and only if H is Q-controllable and there exists a unique rational orthogonal matrix R such that R _e = e, Q _H = R ^? Q _G R.     

铜（Ⅱ）－4－（吡啶－2′－甲基）－1，4，7，10－四氮杂环十三烷－11，13－二酮－α－氨基酸（5－取代邻菲罗啉）三元配合物的稳定性研究

用ｐＨ法在２５．０±０．１℃，Ｉ＝０．１ｍｏｌ·ｄｍ－３ＫＮＯ３条件下，测定铜（Ⅱ）－４－（吡啶－２′－甲基）－１，４，７，１０－四氮杂环十三烷－１１，１３－二酮－α－氨基酸（５－取代邻菲罗啉）三元配合物的稳定常数；比较了带吡啶甲基二氧四胺大环配体和二氧四胺大环配体与Ｃｕ（Ⅱ）的配位能力、配位方式；研究了该三元体系配合物稳定性与配体α－氨基酸酸碱强度之间的直线自由能关系；探讨了Ｃｕ（Ⅱ）和５－取代邻菲罗啉之间的ｄ－ｐ反馈π键以及邻菲罗啉取代基Ｈａｍｍｅｔｔ诱导效应与该三元配合物稳定性之间的关系。讨论了４－（吡啶－２′－甲基）－１，４，７，１０－四氮杂环十三烷－１１，１３－二酮和４－（喹啉－２′－甲基）－１，４，７，１０－四氮杂环十三烷－１１，１３－二酮与Ｃｕｘｐｈｅｎ所形成配合物的不同空间结构及其对配合物稳定性产生的影响。     

Pressure-Suppressed Carrier Trapping Leads to Enhanced Emission in Two-Dimensional Perovskite (HA)2(GA)Pb2I7

A remarkable PL enhancement by 12 fold is achieved using pressure to modulate the structure of a recently developed 2D perovskite (HA)₂(GA)Pb₂I₇ (HA=n-hexylammonium, GA=guanidinium). This structure features a previously unattainable, extremely large cage. In situ structural, spectroscopic, and theoretical analyses reveal that lattice compression under a mild pressure within 1.6 GPa considerably suppresses the carrier trapping, leading to significantly enhanced emission. Further pressurization induces a non-luminescent amorphous yellow phase, which is retained and exhibits a continuously increasing band gap during decompression. When the pressure is released to 1.5 GPa, emission can be triggered by above-band gap laser irradiation, accompanied by a color change from yellow to orange. The obtained orange phase could be retained at ambient conditions and exhibits two-fold higher PL emission compared with the pristine (HA)₂(GA)Pb₂I₇.     

菲佐测风激光雷达及风速反演算法

 研制了基于菲佐干涉仪的测风激光雷达系统,并使用高斯拟合法和最大似然法反演风速,对两种风速反演方法进行了分析,结果表明：风速较小时,两种方法具有相似的风速反演精度,但高斯拟合法收敛快、受条纹信噪比影响较小;风速较大时,高斯拟合法会由于条纹移出而产生较大误差,而最大似然法在处理风速较大情况时具有优势。实际风速测量时,应根据风速估计值的大小,采用两种方法分别处理大风速和小风速时的情况。最后,使用研制的测风激光雷达系统和风速反演算法,得到了1.5 km以内的大气风速廓线。     

Encapsulating Perovskite Quantum Dots in Iron‐Based Metal–Organic Frameworks (MOFs) for Efficient Photocatalytic CO2 Reduction

Improving the stability of lead halide perovskite quantum dots (QDs) in a system containing water is the key for their practical application in artificial photosynthesis. Herein, we encapsulate low‐cost CH₃NH₃PbI₃ (MAPbI₃) perovskite QDs in the pores of earth‐abundant Fe‐porphyrin based metal organic framework (MOF) PCN‐221(Fe_x) by a sequential deposition route, to construct a series of composite photocatalysts of MAPbI₃@PCN‐221(Fe_x) (x=0–1). Protected by the MOF the composite photocatalysts exhibit much improved stability in reaction systems containing water. The close contact of QDs to the Fe catalytic site in the MOF, allows the photogenerated electrons in the QDs to transfer rapidly the Fe catalytic sites to enhance the photocatalytic activity for CO₂ reduction. Using water as an electron source, MAPbI₃@PCN‐221(Fe_0.2) exhibits a record‐high total yield of 1559 μmol g^?1 for photocatalytic CO₂ reduction to CO (34 %) and CH₄ (66 %), 38 times higher than that of PCN‐221(Fe_0.2) in the absence of perovskite QDs.