Translating Molecular Recognition into a Pressure Signal to enable Rapid,Sensitive, and Portable Biomedical Analysis

Herein, we demonstrate that a very familiar, yet underutilized, physical parameter—gas pressure—can serve as signal readout for highly sensitive bioanalysis. Integration of a catalyzed gas‐generation reaction with a molecular recognition component leads to significant pressure changes, which can be measured with high sensitivity using a low‐cost and portable pressure meter. This new signaling strategy opens up a new way for simple, portable, yet highly sensitive biomedical analysis in a variety of settings.     

氧化环境和比例对改性Hummers法制备GO的影响

以鳞片石墨(GR)为原料,采用改性Hummers法液相氧化方法制备氧化石墨,通过超声剥离的方法剥离出片状的氧化石墨烯(GO),探讨了H₂SO₄环境与H₂SO₄+H₃PO₄混酸环境和KMnO₄与GR的比例对GO制备的影响。采用FTIR、UV、TG、XRD、SEM和XPS等分析手段对制备的GO进行分析。结果表明：GO外貌是呈褶皱片状,在片层上主要有C=O、C-OH、-COOH和C-O-C等官能团,以共价键形式存在石墨层间;通过TG与XPS数据分析表明在H₂SO₄ H₃PO₄混酸环境下制备的GO含氧官能团较多,并且(KMnO₄)与鳞片石墨的最佳比例是1:4。     

Postfunctionalization of BN‐Embedded Polycyclic Aromatic Compounds for Fine‐Tuning of Their Molecular Properties

New BN‐embedded, thiophene‐fused, polycyclic aromatic compounds with planar geometry were designed and synthesized. The molecules showed excellent stability and chemical robustness. Postfunctionalization on this skeleton was demonstrated with a series of electrophilic bromination, palladium‐catalyzed cross‐coupling, and Knoevenagel condensation reactions. The π skeleton remained intact during these late‐stage transformations. The optical and electronic properties have been well tuned through incorporation of electron‐rich and ‐deficient groups on the backbone. This work shows the great advantage of the postfunctionalization strategy on BN‐containing polycyclic aromatic compounds for fast diversification and materials screening.     

Novel NO-releasing derivatives of betulinic acid with antitumor activity

Thirteen novel NO-releasing derivatives of betulinic acid (BA) bearing two types of NO-donors (nitrates and furoxans) were synthesized and evaluated for their antitumor activity. The results showed that furoxan-based derivatives exhibited higher antitumor activity than nitrate-based derivatives, with compounds 11a and 11b displaying promising potency against B16 cell lines and HepG2 cell lines (IC50 < 1 μmol/L). Wesupposed that NO-releasing amount of these derivatives which can be detected by Griess method may contribute more to their antitumor activity. As a result, furoxan-based derivatives released larger amount of NO than that of nitrate-based derivatives, which partially explained the higher anti-tumor activity of the former.     

Stereochemical determination of tetrahydropyran-substituted xanthones from fungus Chaetomium murorum

Chaetoxanthone D (1), a new tetrahydropyran-substituted xanthone originated from polyketide pathway, together with the four known natural products chaetoxanthone C (2), alternariol methyl ether (3), alternariol (4) and 2,5-dimethyl-7-hydroxychromone (5) was isolated from a strain of Chaetomium murorum. The structures of these compounds were elucidated based on extensive spectroscopic analyses. The absolute configurations of 1 and 2 were determined by using quantum chemical electronic circular dichroism (ECD) calculations.     

Preparation of ZSM‐5 Coated on Monolithic Interconnected Macroporous Al2O3 Using Cheap n‐Butylamine as Template

Using cheap n‐butylamine as template, ZSM‐5 zeolites have been successfully synthesized and coated on monolithic interconnected macroporous Al₂O₃ by the secondary growth method. The use of cheap n‐butylamine could significantly reduce the synthesis cost. Hierarchical monolithic ZSM‐5 zeolites were prepared from synthetic mixtures with different H₂O/Na₂O or SiO₂/Al₂O₃ ratio. The synthesized samples were characterized by scanning electron microscopy (SEM), X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FT‐IR) and N₂ adsorption‐desorption. The results show that the hierarchical monolithic zeolites were obtained with cheap n‐butylamine template as template. During the hydrothermal reaction process, the morphology of the micrometer‐sized support was well maintained. The irregular crystals were formed in a wide range of the H₂O/Na₂O or SiO₂/Al₂O₃ ratio of synthetic mixtures and coated on monolithic Al₂O₃. The relative crystallinity of the zeolites was highest at H₂O/Na₂O=250 or SiO₂/Al₂O₃=160. This type of composites exhibited hierarchical porous structures and relatively high specific surface areas.     

超声波促进手性双酰基氧化膦的合成

以L-薄荷醇为原料,经3步反应制备得到中间体薄荷基二氯化膦.该中间体首先通过与超声波辐射制备的微米级钠粒反应形成薄荷基膦二钠盐,然后依次经过偶联及氧化反应合成了目标产物(-)-双(薄荷基甲酰基)薄荷基氧化膦(BMMPO),并经过1 H NMR、13 C NMR、31P NMR和元素分析进行了表征.     

喹啉黄中各组分的定性及定量研究

利用高效液相色谱(HPLC)对喹啉黄各组分进行分离并定量,通过液相色谱–串联质谱(LC–MS/MS)对各组分进行定性。以0.01 mol/L乙酸铵溶液和甲醇为流动相进行梯度洗脱,利用Agilent XDB–C18色谱柱对喹啉黄各组分进行分离,峰面积归一化法定量。质谱采用电喷雾负离子(ESI–)模式电离,多反应监测(MRM)模式检测,对喹啉黄各组分进行定性。结果表明,喹啉黄主要成分为喹啉黄一钠盐和喹啉黄二钠盐,分别各有两种同分异构体,各组分质量浓度在5.0~100.0μg/m L范围内与峰面积呈良好的线性关系。加标回收率为98.2%~99.1%,测定结果的相对标准偏差为0.90%~1.58%(n=6)。该方法具有良好的精密度和准确度,可用于喹啉黄中各组分的测定。     

Hydrothermal synthesis of peony-like CuO micro/nanostructures for high-performance lithium-ion battery anodes

The peony-like CuO micro/nanostructures were fabricated by a facile hydrothermal approach. The peonylike CuO micro/nanostructures about 3-5 μm in diameter were assembled by CuO nanoplates. These CuO nanoplates, as the building block, were self-assembled into multilayer structures under the action of ethidene diamine, and then grew into uniform peony-like CuO architecture. The novel peony-like CuO micro/nanostructures exhibit a high cycling stability and improved rate capability. The peony-like CuO micro/nanostructures electrodes show a high reversible capacity of 456 mAh/g after 200 cycles, much higher than that of the commercial CuO nanocrystals at a current 0.1 C. The excellent electrochemical performance of peony-like CuO micro/nanostructures might be ascribed to the unique assembly structure, which not only provide large electrode/electrolyte contact area to accelerate the lithiation reaction, but also the interval between the multilayer structures of CuO nanoplates electrode could provide enough interior space to accommodate the volume change during Li~+ insertion and de-insertion process.