A cytotoxic compound from the leaves of Juglans mandshurica

From Juglans mandshurica leaves, a new quinone compound was isolated through bioassay-guided fractionation. The structure elucidation of the compound was established based on spectroscopic studies, notably of the 2D NMR spectra. The compound exhibited moderate cytotoxic activities against Hela, MCF-7, BGC823 and 3T3-Llcell lines with IC50 ranges from 7.5 to 26.8 μmol/L.     

Boomerang‐Type Substitution Reaction: Reactivity of Fullerene Epoxides and a Halofullerenol

The C_s‐symmetric fullerene chlorohydrin C₆₀(Cl)(OH)(OOtBu)₄ reacts with 4‐dimethylaminopyridine (DMAP) and 1,4‐diazabicyclo[2.2.2]octane (DABCO) to yield two isomers with the formula C₆₀(O)(OOtBu)₄ in good yields. These isomers differ with respect to the location of the epoxy functionality. The one from DMAP is C_s symmetric, whereas that from DABCO is C₁ symmetric with the epoxy group on the central pentagon. Two different mechanisms are proposed to explain the chemoselectivity of these reactions. The reaction with DMAP involves single‐electron transfer as the key step; DMAP acts as the electron donor. A combination of an oxygen‐atom shift and S_N2′′ processes (boomerang substitution) are responsible for the formation of isomer with DACBO. Various related reactions support the proposed mechanisms. The structures of new fullerene derivatives were determined by spectroscopy, single‐crystal X‐ray analysis, and chemical correlation experiments.     

Determination of radium isotopes in mineral and environmental water samples by alpha-spectrometry

Summary A method for the determination of low-level radium isotopes in mineral and environmental water samples by alpha-spectrometry has been developed. Radium-225, which is in equilibrium with its mother ²²⁹Th, was used as a yield tracer. Radium were preconcentrated from water samples by coprecipitation with BaSO₄and iron (III) hydroxide at pH 8-9 using ammonia solution, then isolated from uranium, thorium and iron using a Microthene-TOPO chromatography column at 8M HCl, separated from barium in a cation-exchange resin column using 0.05M 1,2-cyclohexylenedinitrilotetraacetic acid monohydrate at pH 8.5 as an eluant, and finally electrodeposited on a stainless steel disc in a medium of 0.17M (NH₄)₂C₂O₄at pH 2.6 and current density of 400 mA^. cm^-2, and counted bya-spectrometry. Optimum experimental conditions for radium separation, purification and electrodeposition have been studied and discussed in the paper. The lower limits of detection of the method are 0.11 mBq^. l^-1for ²²⁶Ra, ²²⁸Ra and ²²⁴Ra, respectively, if 2 l of water are analyzed. The method has been checked with a certified reference material IAEA-Soil-6 supplied by the International Atomic Energy Agency and reliable results were obtained. Eighteen water samples collected in Italy have been analyzed with the method, the mean radiochemical yields for radium were 86.2±6.5%. The obtained radium concentrations were in the range of 0.50-60.8 mBq^. l^-1for ²²⁶Ra, of 0.10-25.7 mBq^. l^-1for ²²⁸Ra, and of￡LLD-7.97 mBq^. l^-1for ²²⁴Ra. The ²²⁸Ra/²²⁶Ra and ²²⁴Ra/²²⁶Ra ratios were in the range of 0.189-4.45 and￡LLD-0.941, respectively.     

含吗啉基片段的水杨醛席夫碱类化合物的合成及其淬灭1,1-二苯基-2-三硝基苯肼自由基性能

通过3-氟-4-吗啉基苯胺和取代水杨醛缩合反应,合成了14个含吗啉基片段水杨醛席夫碱类化合物(Ⅰa-Ⅰn)。通过核磁共振波谱仪(NMR)、傅里叶变换红外光谱仪(FTIR)、液相色谱-质谱联用仪(LC-MS)和元素分析等技术手段研究了产物的结构和淬灭1,1-二苯基-2-三硝基苯肼(DPPH)自由基的活性。 结果表明,在0.02~0.10 g/L,所有化合物均表现出一定的淬灭DPPH自由基活性。 其中,化合物Ⅰd和Ⅰf表现出较为优异的性能,化合物Ⅰd的活性在30%~55%,化合物Ⅰf的活性则大于50%。 随着化合物Ⅰd、Ⅰh、Ⅰj和Ⅰn质量浓度的增大,其淬灭DPPH自由基的活性均呈现增强趋势。     

Sesquiterpenoids and Phenylpropane Derivatives from Sonchus uliginosus

Six new compounds were isolated from the whole plant of Sonchus uliginosus, including three eudesmane‐type sesquiterpenoids (1β,6α)‐1,6,14‐trihydroxyeudesm‐3‐en‐12‐oic acid γ‐lactone ( 1 ), (1β,6α)‐1,6,14‐trihydroxyeudesma‐3,11(13)‐dien‐12‐oic acid γ‐lactone ( 2 ), and (1β,6α)‐1,6‐dihydroxy‐14‐O‐[(4‐hydroxyphenyl)acetyl]eudesma‐3,11(13)‐dien‐12‐oic acid γ‐lactone ( 3 ), and three phenylpropane derivatives, 4‐hydroxy‐γ,3,5‐trimethoxybenzenepropanol ( 6 ), γ,3,4,5‐tetramethoxybenzenepropanol ( 7 ), and γ,3,4,5‐tetramethoxybenzenepropanol acetate ( 8 ), together with the two known compounds 4 and 5 . The new structures were elucidated by means of spectroscopic methods, such as IR, EI‐MS, HR‐ESI‐MS, 1D‐ and 2D‐NMR, and by comparison of the spectroscopic data with those reported for structurally related compounds.     

Copper‐Bismuth Bimetallic Microspheres for Selective Electrocatalytic Reduction of CO2 to Formate

Electrocatalytic carbon dioxide reduction holds great promise for reducing the atmospheric CO₂ level and alleviating the energy crisis. High‐performance electrocatalysts are often required in order to lower the high overpotential and expedite the sluggish reaction kinetics of CO₂ electroreduction. Copper is a promising candidate metal. However, it usually suffers from the issues of poor stability and low product selectivity. In this work, bimetallic Cu‐Bi is obtained by reducing the microspherical copper bismuthate (CuBi₂O₄) for selectively catalyzing the CO₂ reduction to formate (HCOO^–). The bimetallic Cu‐Bi electrocatalyst exhibits high activity and selectivity with the Faradic efficiency over 90% in a wide potential window. A maximum Faradaic efficiency of ~95% is obtained at –0.93 V versus reversible hydrogen electrode. Furthermore, the catalyst shows high stability over 6 h with Faradaic efficiency of ~95%. This study provides an important clue in designing new functional materials for CO₂ electroreduction with high activity and selectivity.     

2-[(卤代苯胺基)羰基]苯甲酸与Cu(Ⅱ)、Ni(Ⅱ)、Co(Ⅱ)的配合物研究

本文报道了4种2-[(卤代苯胺(?))羰基]苯甲酸与Cu(Ⅱ)、Ni(Ⅱ)、Co(Ⅱ)配合物的制备,并通过元素分析、热重分析、红外光谱和电子光谱分析以及磁化率测定对它们进行了表征.结果证明,配合物是通过羧酸根上羟基氧原子和酰胺羰基上氧原子配位成键,除Cu(Ⅱ)配合物分子为平面正方形结构外.其余均为八面体结构,只是扭曲程度不同.并对它们的配位场参数进行了计算.     

The mechanical properties and tribological behavior of epoxy resin composites modified by different shape nanofillers

Mechanical properties and tribological behavior of epoxy resin (EP) and EP nanocomposites containing different shape nanofillers, such as spherical silica (SiO₂), layered organo‐modified montmorillonite (oMMT) and oMMT‐SiO₂ composites, were investigated. The SiO₂‐oMMT composites were prepared by in situ deposition method and coupling agent modification, and transmission electron microscopy (TEM) analysis shows that spherical SiO₂ is self‐assembled on the surface of oMMT, which forms a novel layered‐spherical nanostructure. The mechanical properties test results show that oMMT obviously improves the strength of EP and SiO₂ enhances its toughness, but oMMT‐SiO₂ exhibits a synergistic effect on toughening and reinforcing EP simultaneously. A pin‐on‐disc rig was used to test friction and wear loss of pure EP and EP nanocomposites. The tribological test results prove that these nanofillers with different shapes play different roles for improving the wear resistance of EP nanocomposites. Morphologies of the worn surfaces were studied further by scanning electron microscopy (SEM) observations, and it was clarified that the EP and EP nanocomposites undergo similar wear mechanisms. Copyright © 2006 John Wiley & Sons, Ltd.     

Streamlined construction of peptide macrocycles via palladium-catalyzed intramolecular S-arylation in solution and on DNA

A highly efficient and versatile method for construction of peptide macrocycles via palladium-catalyzed intramolecular S-arylation of alkyl and aryl thiols with aryl iodides under mild conditions is developed. The method exhibits a broad substrate scope for thiols, aryl iodides and amino acid units. Peptide macrocycles of a wide range of size and composition can be readily assembled in high yield from various easily accessible building blocks. This method has been successfully employed to prepare an 8-million-membered tetrameric cyclic peptide DNA-encoded library (DEL). Preliminary screening of the DEL library against protein p300 identified compounds with single digit micromolar inhibition activity.

A highly efficient and versatile method for construction of peptide macrocycles via palladium-catalyzed intramolecular S-arylation of alkyl and aryl thiols with aryl iodides under mild conditions is developed.     

A New Synthetic Route to 12-Oxo-1, 15-pentadecanlactam

12-Oxo-1,15-pentadecanlactam 7 was synthesized from cyclododecanone with a totalyield of 36% in a seven-step reaction. The azide 5 to 12-nitro-1,15-pentadecanlactam 6 is the key step featured by direct ring expansion.